监控HP服务器cpu状态脚本

监控HP服务器cpu状态脚本

脚本1（如有问题则发邮件通知）：

# vi cpu.sh

按a或i进入编辑模式

#!/bin/bash

Name=`hostname`

IP=`/sbin/ifconfig eth0 | grep "inet addr" | awk -F[:" "]+ '{print $4}'`

Date=`date +%m%d%y`

Num=`/usr/sbin/dmidecode | grep -i 'serial number' | head -n 1`

CPU=`/sbin/hpasmcli -s "show server" | grep Status | awk -F[:" "]+ '{print $2}'`
CPU2=`/sbin/hpasmcli -s "show server" | grep Speed | awk -F[:" "]+ '{print $2}' | head -n 1`MHz

i=1;

for OK in $CPU
  do
    if [ $OK = "Ok" ]
then
     i=$(( $i + 1 ))
   else
touch /log/$Date.log
echo "$Name($IP) $i cpu($CPU2) is bad"  >> /log/$Date.log
echo "$Num" >> /log/$Date.log
/usr/bin/mail -s "$Name($IP) cpu($CPU2) bad" [email protected] < /log/$Date.log
 i=$(( $i + 1 ))
  fi
done

按Esc退出编辑模式

:wq (保存并退出)

脚本2(每天发邮件通知)：

# vi cpu.sh

按a或i进入编辑模式

#!/bin/bash

Name=`hostname`

IP=`/sbin/ifconfig eth0 | grep "inet addr" | awk -F[:" "]+ '{print $4}'`

Date=`date +%m%d%y`

Num=`/usr/sbin/dmidecode | grep -i 'serial number' | head -n 1`

CPU=`/sbin/hpasmcli -s "show server" | grep Status | awk -F[:" "]+ '{print $2}'`

CPU2=`/sbin/hpasmcli -s "show server" | grep Speed | awk -F[:" "]+ '{print $2}' | head -n 1`

touch /log/$Date.log


i=1;

for OK in $Mem
  do
    if [ $OK = "Ok" ]
then

echo "$Name($IP) $i cpu($CPU2) is ok"  >> /log/$Date.log

     i=$(( $i + 1 ))
 else
echo "$Name($IP) $i cpu($CPU2) is bad"  >> /log/$Date.log
echo "$Num" >> /log/$Date.log
/usr/bin/mail -s "$Name($IP) cpu($CPU2) bad" [email protected] < /log/$Date.log
 i=$(( $i + 1 ))
  fi
done

按Esc退出编辑模式

:wq (保存并退出)

本文出自 “linux” 博客，谢绝转载！