技嘉780G在Ubuntu 9.04 下安装显示驱动

技嘉780G在Ubuntu 9.04 下安装显示驱动

 

在AMD网站上下载ATI对应的驱动包FOR LINUX版本

http://support.amd.com/us/psearch/Pages/psearch.aspx?type=2.7&product=2.7.4.3.3.3.1&contentType=Tech%20Download%20Chipset%20Motherboard

ati-driver-installer-9-4-x86.x86_64.run

上传至系统

更改可执行权限：chmod 755 ati-driver-installer-9-4-x86.x86_64.run

 

./ati-driver-installer-9-4-x86.x86_64.run

安装 --  自动或自定义安装

 

安装后，

For versions of X.Org newer than 7, /usr/bin/aticonfig --initial to configure the
driver for your ATI product.
   For versions of X.Org older than 7, /usr/X11R6/bin/aticonfig --initial to configure
the driver for your ATI product.
8  Reboot your system.

 

重启后如果无法进入图形界面可卸载后再安装

 

Launch the Terminal Application/Window and navigate to the /usr/share/ati folder.
With superuser permissions, enter the command "sh ./fglrx-uninstall.sh".
Reboot your system.

 启动3D效果需要下载envyng－core

代码:

sudo apt-get install envyng-core

运行envyng

代码:

sudo envyng -t

按提示安装完成后重启

 

突然发现好像是因为原来开启过Metacity的复合特性，导致桌面效果无法打开，进而导致Compiz Fusion的3D桌面等特效打不开。
打开gconf-editor，将/apps/metacity/general/compositing_manager这个键值后面的勾去掉即可，然后在去启动桌面效果，无论是正常和扩展，都能大开了，3D桌面也可以启动了