IBM S 刀箱 配置
| BladeCenter S 标配 | |||
| 88861NC | BCS Chassis standard( no DSM and SAS switch, 2Power Supply ),7U/6 Blade, CD-RW / DVD-ROM , AMM | 与88861MC区别是采用国标的电源线，可以直接插到普通的插座里, 18/July 开始供货 | |
| 8886E2C | BCS Chassis (Express), 4x PS, 1xDSM, 1xSAS connectivity module，7U/6 Blade, CD-RW / DVD-ROM , AMM | 与8886E1C区别是采用国标的电源线，可以直接插到普通的插座里，18/July 开始供货 | |
| 88861TC | BladeCenter S 机箱基本配置，7U高6个刀片插槽，含2个1450W 110V～220V自适应电源，满配冗余风扇和1个高级管理模块,选配光驱 | ||
| 8886I02 | BladeCenter S 机箱基本配置，7U高6个刀片插槽，含2个1450W 110V～220V自适应电源，满配冗余风扇和1个高级管理模块,DVD光驱 | ||
| 8886ETC | BladeCenter S 机箱标准配置，7U高6个刀片插槽，含4个1450W 110V～220V自适应电源，满配冗余风扇和1个高级管理模块,标配DVD ROM, 1*NSSM模块, 1* 存储模块 | ||
| 8886EVC | BladeCenter S 机箱高级配置，7U高6个刀片插槽，含4个1450W 110V～220V自适应电源，满配冗余风扇和1个高级管理模块,标配DVD ROM, 2*RSSM模块,2* 存储模块 | ||
| SAS Switch 及附件 | |||
| 43W3584 | IBM BladeCenter S SAS RAID Controller Module | 必须成对安装 | |
| 39Y9195 | SAS Connectivity Module | 可以单个使用，不能做RAID | |
| 43W3581 | IBM BladeCenter S 6-Disk Storage Module (DSM) | 存储模块，最多可安装 2 个;每1个可支持最多6个HS HDD | |
| 串口附件 | |||
| 43W3583 | IBM BladeCenter S Serial Pass-thru Module | ||
| 46M0901 | IBM UltraSlim Enhanced SATA DVD-ROM | IBM超薄内置光驱 DVD-ROM | |
| 46M0902 | IBM UltraSlim Enhanced SATA Multi-Burner | IBM超薄多功能内置光驱 DVD-RW | |
| Power | |||
| 43W3582 | IBM BladeCenter S 950W/1450W Auto-Sensing Power Supplies 3 & 4 | ||
| 46C7438 | IBM BladeCenter S C14 950W/1450W Auto-Sensing Power Supplies 3 and 4 | 与43W3582区别是采用国标的电源线，可以直接插到普通的插座里, 18/July 开始供货 | |
| Hard Disk 硬盘 | |||
| 43W7580 | 750GB Dual Port SATA Hot Swap Option | 最多可安装在S 上12块硬盘，但需要增加"43W3581" | |
| 39M4558 | IBM 500 GB DUAL PORT HS SATA HDD FOR IBM SYSTEM X | 最多可安装在S 上12块硬盘，但需要增加"43W3581" | |
| 43W7523 | IBM Server 73GB 15K SAS HS | 最多可安装在S 上12块硬盘，但需要增加"43W3581" | |
| 43W7524 | IBM Server 146GB 15K SAS HS | 最多可安装在S 上12块硬盘，但需要增加"43W3581" | |
| 43W7630 | IBM Storage and I/O Blade 1TB 7200 Dual Port SATA 3.5" HS HDD | 需要增加"43W3581" | |
| 42D0546 | IBM 750GB 7200 NL SAS 3.5" HS HDD BCS | ||
| 42D0547 | IBM 1 TB 7200 NL SAS 3.5inch HS HDD | ||
| 43X0802 | 300GB 15K 3.5" Hot-Swap SAS HDD | 最多可安装在S 上12块硬盘，但需要增加"43W3581" | |
| 42D0519 | 450GB 15K SAS 3.5" HDD | ||
| 44W2234 | 300GB 15K 6 Gbps SAS 3.5-inch Hot-Swap HDD | ||
| 44W2239 | 450GB 15K 6 Gbps SAS 3.5-inch Hot-Swap HDD | ||
| 44W2244 | 600GB 15K 6 Gbps SAS 3.5-inch Hot-Swap HDD | ||
| 可参考BCE刀箱模块 交换模块 Switch Module | IO模块托架3和4不能混用铜口交换模块(包括CPM) 和光线交换模块，但是OPM可以和铜口交换模块或者光纤交换模块 | ||
| 39Y9324 | 刀片服务器专用20 口（对外 6 口）千兆 2 层以太网交换机模块 | 铜口6端口对外 2层以太网交换模块，最多可安装4个。 | |
| 32R1860 | Nortel L2/3 Copper以太网交换机模块, 6口 RJ45向外 replace 26K6530 | ROHS，1、2、3、4、槽 | |
| 32R1861 | Nortel L2/3 光纤以太网交换机模块，6口 多模光纤向外 replace by 26k6531 | ROHS，1、2、3、4、槽 | |
| 32R1783 | Nortel 10G Uplink Ethernet Switch， 对内14口 | ROHS，1、2、3、4、槽 | |
| 32R1813 | Brocade 4Gb 10-port SAN Switch Module for IBM eServer BladeCenter | 3，4 | |
| 32R1859 | Nortel Networks Layer 2-7 Gigabit Ethernet Switch Module | 3，4 | |
| 39Y9284 | Cisco Systems 4Gb 10-port Fibre Channel Module | 3，4 | |
| 43W6723 | QLogic 4Gb Intelligent Pass-thru Module for IBM BladeCenter | 3，4 | |
| 43W6724 | QLogic 10-port 4Gb SAN Switch Module for IBM BladeCenter | 3，4 | |
| 43W6725 | QLogic 20-port 4Gb SAN Switch Module for IBM BladeCenter | 3，4 | |
| 44X1905 | QLogic 20-port 8 Gb SAN Switch Module for IBM BladeCenter | ||
| 44X1907 | QLogic(R)8 Gb Intelligent Pass-thru Module for BladeCenter | ||
| 44W4404 | Nortel 1/10Gb Uplink Ethernet Switch Module | ||
| 43W4395 | Cisco Catalyst Switch Module 3012 for IBM BladeCenter | ||
| 39Y9316 | Bitmap
|
ROHS，标配不带光通路直通模块电缆；39Y9171或39Y9172配合使用；最多可安装4根；无交换功能 | |
| 39Y9171 | Bitmap
|
ROHS，SC 光纤接口 | |
| 39Y9172 | 光通路直通模块 LC 电缆(含4个接口) | ROHS，LC 光纤接口 | |
| 39Y9320 | Pict
|
ROHS，连接网络，无交换功能，最多可再配2根"39Y9170”; | |
| 39Y9170 | Bitmap
|
ROHS | |
| 44W4483 | Intelligent Copper Passthru Module for IBM BladeCente | 以太网直通模块，14口对外，10M/100M/1000M自适应 | |
| Associated Options | |||
| 25K8376 | IBM BladeCenter T Filter Option (EOL) | ||
| 25K8373 | IBM BladeCenter PCI I/O Expansion Unit II | ||
| 32R1877 | IBM 10GbE 850nm Fiber XFP Transceiver | ||
| 32R1878 | IBM 10GbE 1310nm Fiber XFP Transceiver (LR) (EOL) | ||
| 系统管理 System Management | 管理模块，标配1个，最多2个 | ||
| 25R5778 | IBM BladeCenter Advanced Management Module | 冗余管理模块，停产 | |
| 2019A1X | IBM BladeCenter Advanced Management Module | 冗余管理模块，替代25R5778 | |
| 2019B2X | BladeCenter Open Fabric Manager for BCS V3.1 | ||
| 办公室安装套件 | |||
| 201886X | IBM BladeCenter Office Enablement Kit | 11U高的标准机柜, 带有可锁的前后门和特殊的消音设备 | |
| 43X0340 | IBM BladeCenter Airborne Contaminant Filter | ||
| 43X0437 | IBM BladeCenter Airborne Contaminant Replacement Filter (4-Pack) | ||
Move the pointer over the part for a description. Click the part to locate the part number.
Front view
Notes:
This parts listing supports the IBM BladeCenter S (Type 7779, 8886).
If your specific model is not listed, please use the Quick path feature on the right-nav, and refer to the product description. Look for the "Based on" model.
| Item | Description | Replacement part number | CRU |
|---|---|---|---|
|
Chassis shell (without shuttle) | ||
| (all models) | 44E8050 |
|
|
|
Blade server filler | ||
| (all models) | 39M3317 |
|
|
|
Media tray | ||
| (PATA models 1Mx, E1x) | 44E8052 |
|
|
| (SATA models ETx, EVx ) | 44E8167 |
|
|
|
DVD-ROM | ||
| (PATA) | 43W4603 |
|
|
| (SATA Multi-Burner) | 44W3256 |
|
|
|
Bezel | ||
| (all models) | 44E8055 |
|
|
|
Hard drive filler | ||
| (all models) | 39M4375 |
|
|
|
Storage module filler | ||
| (all models) | 44E8060 |
|
|
|
Storage module | ||
| (all models) | 44E8057 |
|
|
| . | DVD drive filler | ||
| (SATA) | 46C5496 |
|
|
Rear view
| Item | Description | Replacement part number | CRU |
|---|---|---|---|
|
Midplane | ||
| (all models) | 43W3631 |
|
|
|
Shuttle (with card and cable) | ||
| (all models) | 44E8051 |
|
|
|
I/O module filler | ||
| (all models) | 25R9934 |
|
|
|
Advanced management module | ||
| (all models) | 39Y9661 |
|
|
|
Serial pass-thru module | ||
| (all models) | 44E8054 |
|
|
|
Fan module | ||
| (all models) | 44E8053 |
|
|
|
Power supply | ||
| 1450 W module - C20 (all models) | 39Y7367 |
|
|
| 1450 W module - C14 (all models) | 39Y7403 |
|
|
|
Power supply filler | ||
| (all models) | 44E8059 |
|
|
| Fan module to midplane cable | |||
| (all models) | 44E8061 |
|
|
| Miscellaneous parts kit | |||
| (all models) | 44E8062 |
|
|
| Rack kit | |||
| (all models) | 39M3256 |
|
|
Power cords - C14 power module
Several power cords are available for use with the C14 power module replacement part number (CRU) 39Y7403, depending on the location in the world where the cord will be used.
The following table lists the PDU power cord replacement part numbers (CRUs)..
Used in these countries |
Description |
CRU |
|---|---|---|
Worldwide |
2.0 m, 13 A/125-10 A/250 V, C13 to IEC 320-C14 Rack Power Cable |
39M5508 |
| Worldwide | 2.8 m, 13 A/125-10 A/250 V, C13 to IEC 320-C14 Rack Power Cable | 39M5509 |
| Worldwide | 4.3 m, 13 A/125-10 A/250 V, C13 to IEC 320-C14 Rack Power Cable | 39M5510 |
| Worldwide | 2.8 m, 15 A/125-10 A/250 V, C13 to IEC 320-C20 Rack Power Cable | 39M5392 |
The following table lists the power cord replacement part numbers (CRUs).
Used in these countries |
Description |
CRU |
|---|---|---|
Argentina |
1.8 m, 10 A/220 V, C13 to IRAM 2073 |
39M5067 |
| 2.8 m, 10 A/220 V, C13 to IRAM 2073 | 39M5068 | |
| 4.3 m, 10 A/220 V, C13 to IRAM 2073 | 39M5069 | |
Australia / New Zealand |
1.8 m, 10 A/230 V, C13 to AS/NZS 3112 |
39M5101 |
| 2.8 m, 10 A/230 V, C13 to AS/NZS 3112 | 39M5102 | |
| 4.3 m, 10 A/230 V, C13 to AS/NZS 3112 | 39M5103 | |
| Brazil | 1.8 m, 10 A/220 V, C13 to NBR 6147 |
39M5239 |
| 2.8 m, 10 A/220 V, C13 to NBR 6147 | 39M5240 | |
| 4.3 m, 10 A/220 V, C13 to NBR 6147 | 39M5241 | |
| China | 1.8 m, 10 A/220 V, C13 to GB 2099.1 | 39M5205 |
| 2.8 m, 10 A/220 V, C13 to GB 2099.1 | 39M5206 | |
| 4.3 m, 10 A/220 V, C13 to GB 2099.1 | 39M5207 | |
Denmark |
1.8 m, 10 A/230 V, C13 to DK2-5a |
39M5129 |
| 2.8 m, 10 A/230 V, C13 to DK2-5a | 39M5130 | |
| 4.3 m, 10 A/230 V, C13 to DK2-5a | 39M5131 | |
| Europe | 1.8 m, 10 A/230 V, C13 to CEE7-VII | 39M5122 |
| 2.8 m, 10 A/230 V, C13 to CEE7-VII | 39M5123 | |
4.3 m, 10 A/230 V, C13 to CEE7-VII |
39M5124 |
|
| India | 1.8 m, 10 A/240 V, C13 to IS 6538 | 39M5225 |
| 2.8 m, 10 A/240 V, C13 to IS 6538 | 39M5226 | |
| 4.3 m, 10 A/24 V, C13 to IS 6538 | 39M5227 | |
| Israel | 1.8 m, 10 A/230 V, C13 to SI 32 | 39M5171 |
| 2.8 m, 10 A/230 V, C13 to SI 32 | 39M5172 | |
| 4.3 m, 10 A/230 V, C13 to SI 32 | 39M5173 | |
| Italy | 1.8 m, 10 A/230 V, C13 to CEI 23-16 | 39M5164 |
| 2.8 m, 10 A/230 V, C13 to CEI 23-16 | 39M5165 | |
| 4.3 m, 10 A/230 V, C13 to CEI 23-16 | 39M5166 | |
| Japan | 1.8 m, 12 A/200 V, C13 to JIS C-8303 | 39M5185 |
| 2.8 m, 12 A/200 V, C13 to JIS C-8303 | 39M5186 | |
| 4.3 m, 12 A/200 V, C13 to JIS C-8303 | 39M5187 | |
| 1.8 m, 12 A/100 V, C13 to JIS C-8303 | 39M5198 | |
| 2.8 m, 12 A/100 V, C13 to JIS C-8303 | 39M5199 | |
| 4.3 m, 12 A/100 V, C13 to JIS C-8303 | 39M5200 | |
| Korea | 1.8 m, 12 A/250 V, C13 to KSC 8305 | 39M5218 |
| 2.8 m, 12 A/250 V, C13 to KSC 8305 | 39M5219 | |
| 4.3 m, 12 A/250 V, C13 to KSC 8305 | 39M5220 | |
| South Africa | 1.8 m, 10 A/230 V, C13 to SABS 164 | 39M5143 |
| 2.8 m, 10 A/230 V, C13 to SABS 164 | 39M5144 | |
| 4.3 m, 10A/230 V, C13 to SABS 164 | 39M5145 | |
| Switzerland | 1.8 m, 10 A/230 V, C13 to SEV 1011 | 39M5157 |
| 2.8 m, 10 A/230 V, C13 to SEV 1011 | 39M5158 | |
| 4.3 m, 10 A/230 V, C13 to SEV 1011 | 39M5159 | |
| Taiwan | 1.8 m, 10 A/250 V, C13 to CNS 10917-3 | 39M5253 |
| 2.8 m, 10 A/250 V, C13 to CNS 10917-3 | 39M5254 | |
| 4,3 m, 10 A/250 V, C13 to CNS 10917-3 | 39M5255 | |
| 1.8 m, 13 A/125 V, C13 to CNS 10917-3 | 39M5462 | |
| 2.8 m, 13 A/125 V, C13 to CNS 10917-3 | 39M5463 | |
| 4.3 m, 13 A/125 V, C13 to CNS 10917-3 | 39M5464 | |
| United Kingdom | 1.8 m, 10 A/230 V, C13 to BS 1363/A | 39M5150 |
| 2.8 m, 10 A/230 V, C13 to BS 1363/A | 39M5151 | |
| 4.3 m, 10 A/230 V, C13 to BS 1363/A | 39M5152 | |
| United States | 1.8 m, 10 A/208 V, C13 to NEMA 6-15P | 39M5094 |
| 2.8 m, 10 A/208 V, C13 to NEMA 6-15P | 39M5095 | |
| 4.3 m, 10 A/208 V, C13 to NEMA 6-15P | 39M5096 | |
| 1.8 m, 13 A/120 V, C13 to NEMA 5-15P | 39M5511 | |
| 2.8 m, 13 A/120 V, C13 to NEMA 5-15P | 39M5512 | |
| 4.3 m, 13 A/120 V, C13 to NEMA 5-15P | 39M5513 |
Power cords - C20 power module
Several power cords are available for use with the C20 power module replacement part number (CRU) 39Y7367, depending on the location in the world where the cord will be used.
The following table lists the PDU power cord replacement part numbers (CRUs).
Used in these countries |
Description |
CRU |
|---|---|---|
Worldwide |
2.0m, 16A/100-250V, C19 to IEC 320-C20 Rack Power Cable |
39M5388 |
| Worldwide | 2.5m, 16A/100-240V, C19 to IEC 320-C20 Rack Power Cable | 39M5389 |
The following table lists the power cord replacement part numbers (CRUs).
| China | 1.8 m, 16 A/220 V, C19 to GB 2099.1 | 39M5353 |
| 2.5 m, 16 A/220 V, C19 to GB 2099.1 | 39M5354 | |
| 4.3 m, 16 A/220 V, C19 to GB 2099.1 | 39M5355 |