Rails3 routes

Stop! I’d like to tell you something important, but it may be a bit shocking, so you should probably have a seat. Here goes: everything you knew about working with routes in Rails 2… is history! With Rails 3, you’ve got to roll up your sleeves, unlearn what you learned, and route the new way around. And this time, it’s faster, cleaner and a lot more Ruby-like.

In this post, we’ll walk through the underpinnings of Routes in Rails 3. They’ve been rewritten—for good reason—and after we get through the explanation, I’m confident you’ll agree.

Let’s start by looking at some code; here’s the new DSL, in its full glory:

resources :products do
  resource :category
 
  member do
    post :short
  end
 
  collection do
    get :long
  end
end
 
match "/posts/github" => redirect("http://github.com/rails.atom")

Now check out the old way of doing it:

map.resources :products, :member => {:short => :post}, :collection => {:long => :get} do |products|
  products.resource :category
end

As you can see, the example from Rails 3 is much cleaner and more Rubyish. So let’s jump right in and walk through a quick overview of how you’d define different types of routes in Rails 3.

Default Route

The default route in Rails 3, match '/:controller(/:action(/:id))', is much more explicit, as the parenthesis denote optional parameters.

Regular Routes

Rather than defining different keys for controller and action, you just have catalog#view, which is pretty awesome.

match 'products/:id', :to => 'catalog#view'

In Rails 2, you would’ve done:

map.connect 'products/:id', :controller => 'products', :action => 'view'

Named Routes

Named Routes generate helpers like posts_url and posts_path, rather than manually defining the hash to action and controller in helper methods like link_to:

match 'logout', :to => 'sessions#destroy', :as => "logout"

The key :as specifies a name to generate helpers. In Rails 2, you would have done:

map.logout '/logout', :controller => 'sessions', :action => 'destroy'

Empty Route

The root of the web site is the empty route. Whereas Rails 2 added a nice shortcut to it, Rails 3 simplifies things even further:

# Rails 3
root :to => 'welcome#show'
 
# Rails 2
map.root :controller => "welcome", :action => 'show'

Shorthands

The revamped routes in Rails 3 sport some nice shortcuts to commonly used routes. There are two types of shorthands. First, the :to shorthand allows you to skip the :to key and directly designate the route to the matcher:

match "/account" => "account#index"
match "/info" => "projects#info", :as => "info"

Second, the match shorthand allows you to define a path and controller with its action at the same time:

match "account/overview"
 
# identical to
 
match "account/overview", :to => "account#overview"

Verb Routes

While you can limit a route to an HTTP request through :via, it’s a nice added convenience to have Verb routes. Adding sugar on top, you can even use shorthands with them:

get "account/overview"
 
# identical to
 
match "account/overview", :to => "account#overview", :via => "get"

Keys

The match method (as well as the verb shorthands) take a number of optional keys.

:as

The :as key names the route. You can then use named route helpers wherever url_for is available (such as controllers, tests, and mailers). Resource routes (using the resources helper) automatically create named routes, as in Rails 2.3.

match "account/overview/:id", :as => "overview"
 
# in your controller
 
overview_path(12) #=> "/account/overview/12"

:via

Allows you to specify a set of verbs, so only those HTTP requests are accepted for a route.

match "account/setup", :via => [:get, :post]

Rack

Rack is a sweet interface to web servers that provides unified API to Ruby frameworks. Most if not all Ruby frameworks are built on top of Rack these days. The recent built-in support for Rack means your application is not bound to being Rails specific. You can have parts of your application handled by any Rack supported framework, be it Sinatra, Cramp or something else. You can skip the Rails stack altogether and pass on the request to a Rack app.

Here’s an example of a Sinatra app:

class HomeApp < Sinatra::Base
  get "/" do
    "Hello World!"
  end
end
 
Rizwan::Application.routes do
  match "/home", :to => HomeApp
end

And here’s an example of a Rack app:

match "/foo", :to => proc {|env| [200, {}, ["Hello world"]] }
 
match 'rocketeer.js' => ::TestRoutingMapper::RocketeerApp
 
RocketeerApp = lambda { |env|
  [200, {"Content-Type" => "text/html"}, ["javascripts"]]
}

Resourceful Routes

Since Rails 1.2, resourceful routes have been the preferred way to use the router. Recognizing this fact, the Rails core team has added some nice improvements. Take a look at this typical RESTful route in Rails 3:

resources :products

This would generate all the neat helpers we have come to love and would also route the URLs accordingly. Just like before, you can also add multiple resources in a single line:

resources :products, :posts, :categories

More RESTful Actions

As you know, you’re not limited to the seven actions that RESTful architecture provides, but can also define more actions in a resource. Having said that, you might want to keep an eye open if you’re defining lots of actions in a single resource, as they can be turned into separate resources.

We can add RESTful actions to this resource in a couple of ways. Here’s a few collectionRESTful actions inside a block:

resources :products do
  collection do
    get  :sold
    post :on_offer
  end
end

And take a look at this inline member RESTful action:

resources :products do
  get :sold, :on => :member
end

Not only that, but you can also redefine to extend the scope of the default seven RESTful actions:

resources :session do
  collection do
    get :create
  end
end

create actions, which usually only accepts POST requests, can now accept GET requests as well:

resource :session do
  get :create
end

Nested Resources

In Rails 2, nested resources were defined by a block or by using a :has_many or :has_onekey. Both of these have been superseded by a block, giving them a more Rubyish interface to defining associated resources.

Here’s a route for a project that has many tasks and people:

resources :projects do
  resources :tasks, :people
end

Namespaced Resources

These are especially useful when defining resources in a folder; it doesn’t get much cleaner than this:

namespace :admin do
  resources :projects
end

Renaming Resources

You can also rename resources through the :as key. This code uses :as in resourceful routes to change the products path to devices:

namespace :forum do
  resources :products, :as => 'devices' do
    resources :questions
  end
end

Restricting Resources

Resources can be restricted to only specified actions.

resources :posts, :except => [:index]
 
resources :posts, :only => [:new, :create]

Altering Path Names

You can define a different path name for a particular REST action. This helps you customize your RESTful routes. This code will route /projects/1/cambiar to the edit action.

resources :projects, :path_names => { :edit => 'cambiar' }

The Redirect Method

The newly added redirect method in Rails 3 provides a level of convenience not present before. For example, it can redirect to any path given and eventually, can also pass on to a full-blown URI, something previously accomplished by Rails plugins like redirect_routing.

Moreover, the redirect method also introduces generic actions. Unique to Rails 3, generic actions are a simple way to provide the same action to complex paths, depending on what’s passed to redirect.

This code will redirect /foo/1 to /bar/1s:

match "/foo/:id", :to => redirect("/bar/%{id}s")

This code will redirect /account/proc/john to /johns.

match 'account/proc/:name', :to => redirect {|params| "/#{params[:name].pluralize}" }

Note that redirect cannot be used in a block as opposed to other constraints and scopes.

The Constraints Method

Constraints allow you to specify requirements for path segments in routes. Besides that, they also allow you to use a handful of methods to verify whether or not something matches a given criteria. Like a route that checks if the request is AJAX or not, for example.

In this code, we’re using a regular expression, and the route has been restricted to only allow one digit IDs to pass through:

match "/posts/show/:id", :to => "posts#index", :constraints => {:id => /\d/}

Scope

When the scope method is passed along a symbol, it assumes the symbol is a controller. When the argument is a string, the scope method prepends that string to the beginning of the path.

Scope can also have path_segments, which can be constrained, giving us greater flexibility in routes.

controller :articles do
  scope '/articles', :name_prefix => 'article' do
    scope :path => '/:title', :title => /[a-z]+/, :as => :with_title do
      match '/:id', :to => :with_id
    end
  end
end
 
scope :posts, :name_prefix => "posts" do
  match "/:action", :as => "action"
end
 
scope ':access_token', :constraints => { :access_token => /\w{5,5}/ } do # See constraint here
  resources :rooms
end

As you can see, when scope is given a string as its argument, it prepends to the path, something that was accomplished through path_prefix in Rails 2. name_prefix is essentially the same as before.

Optional Segments

Unlike all the previous versions of Rails, path segments can now be optional in routes. Optional segments don’t necessarily have to be path segments, which are passed as parameters to the action. The default route is a good example of optional segments in use. Here, both/posts/new and /posts will be redirected to the create action in posts controller, but/posts/edit will not work:

match 'posts(/new)', :to => 'posts#create'

This is an optional path scope that allows to have a prepended path before a resource:

scope '(:locale)', :locale => /en|pl/ do
  resources :descriptions
end

Pervasive Blocks

As evident from the examples, routes in Rails 3 exhibit pervasive blocks for almost all the methods you’d normally want to pass a block to, helping you achieve DRY in routes.rb.

controller :posts do
  match 'export', :to => :new, :as => :export_request
  match '/:action'
end

Right now, most Rails developers wouldn’t use all of these methods, but when the need arises—when you need to define more complex routes—you might appreciate having the above information handy. You don’t need to use a plugin or a hack when you know it’s built right in. With Rails 3, Routes rock at a whole new level.

Questions and comments welcome!

文章来源: http://www.engineyard.com/blog/2010/the-lowdown-on-routes-in-rails-3/