基础raduis实验

 

Setp 1 R1 basic configure

R1(config)#int fa0/0

R1(config-if)#ip add 192.168.1.254 255.255.255.0

R1(config-if)#no sh

R1(config)#int fa1/0

R1(config-if)#ip add 192.168.10.254 255.255.255.0

R1(config-if)#no sh

R1(config-if)#exit

R1(config)#do show ip int b

Interface                   IP-Address      OK? Method Status                Protocol

FastEthernet0/0             192.168.1.254   YES manual up                    up     

FastEthernet1/0             192.168.10.254 YES manual up                    up

Setp 2 radius server configure

 

 

 

 

 

 

Setp 3 radius client configure

R1(config)#aaa new-model

R1(config)#radius-server host 192.168.10.1 key cisco

R1(config)#do show run | i rad

radius-server host 192.168.10.1 auth-port 1645 acct-port 1646 key cisco

R1(config)#aaa authentication login cisco group radius local

R1#test aaa group radius aa aa new-code

Trying to authenticate with Servergroup radius

User successfully authenticated

R1(config)#line vty 0 4

R1(config-line)#login authe

R1(config-line)#login authentication cisco

R1(config-line)#exi

R1(config)#pass

R1(config)#enable password 123456

 

Setp 4 test