layer7的安装和使用

本人安装时本来在虚拟机上测试多次，但是报错。一直安装不上。（貌似虚拟机内核不能升级）。

本人操作系统为CentOS

此layer 7 在最低2.28上安装。（更高的也可以）

下面是步骤：

1下载

wget http://www.kernel.org/pub/linux/kernel/v2.6/linux-2.6.28.tar.bz2wget http://netfilter.org/projects/iptables/files/iptables-1.4.7.tar.bz2wget http://downloads.sourceforge.net/project/l7-filter/Protocol%20definitions/2009-05-28/l7-protocols-2009-05-28.tar.gz?use_mirror=nchcwget http://downloads.sourceforge.net/project/l7-filter/l7-filter%20kernel%20version/2.22/netfilter-layer7-v2.22.tar.gz?use_mirror=nchc

2

下载所需的软件包

wget http://www.kernel.org/pub/linux/kernel/v2.6/linux-2.6.28.tar.bz2 wget http://netfilter.org/projects/iptables/files/iptables-1.4.7.tar.bz2 wget http://downloads.sourceforge.net/project/l7-filter/Protocol%20definitions/2009-05-28/l7-protocols-2009-05-28.tar.gz?use_mirror=nchc wget http://downloads.sourceforge.net/project/l7-filter/l7-filter%20kernel%20version/2.22/netfilter-layer7-v2.22.tar.gz?use_mirror=nchc

 

解压以上文件

tar jxvf linux-2.6.28.tar.bz2 -C /usr/src tar jxvf iptables-1.4.7.tar.bz2 -C /usr/src tar zxvf l7-protocols-2009-05-28.tar.gz -C /usr/src tar zxvf netfilter-layer7-v2.22.tar.gz -C /usr/src

 

安装Layer 7

　　

 

给新内核加入 Layer 7补丁

cd /usr/src/linux-2.6.28/
patch -p1 〈 /usr/src/netfilter-layer7-v2.22/kernel-2.6.25-2.6.28-layer7-2.22.patch

 

 

以上操作完成后就可以开始编译内核加入 Layer 7的支持了，需注意的是在编译内核中有些选项的选取上一定要注意，安装的成功与否很大程度上取决于内核编译是否成功，内核编译参数如下表所示。

make menuconfig

 

 

General setup  --- 
      Prompt for development and/or incomplete code/drivers       必选
   Networking  --- 
       Networking options  --- 
            Network packet filtering framework (Netfilter)  --- 
                 Core Netfilter Configuration  ---                            该项下的所有项目建议都选上
                      <M> Netfilter connection tracking support          必选
                            <M>   "layer7" match support                     必选                             
                                  Layer 7 debugging output                    必选  
        IP: Netfilter Configuration  ---                                        必选

 

 

编译内核

make clean make make modules make modules_install make install

 

 

更改启动项后并重启系统

vi /etc/grup.conf

 

# grub.conf generated by anaconda # # Note that you do not have to rerun grub after making changes to this file # NOTICE:  You have a /boot partition.  This means that #          all kernel and initrd paths are relative to /boot/, eg. #          root (hd0,0) #          kernel /vmlinuz-version ro root=/dev/VolGroup00/LogVol00 #          initrd /initrd-version.img #boot=/dev/sda default=0 timeout=5 splashimage=(hd0,0)/grub/splash.xpm.gz hiddenmenu title CentOS (2.6.28)         root (hd0,0)         kernel /vmlinuz-2.6.28 ro root=/dev/VolGroup00/LogVol00         initrd /initrd-2.6.28.img title CentOS (2.6.18-164.el5)         root (hd0,0)         kernel /vmlinuz-2.6.18-164.el5 ro root=/dev/VolGroup00/LogVol00         initrd /initrd-2.6.18-164.el5.img

 

 

编译安装 iptables并支持Layer 7

cd iptables-1.4.7/ cp /usr/src/netfilter-layer7-v2.22/iptables-1.4.3forward-for-kernel-2.6.20forward/* extensions/ ./configure --with-ksource=/usr/src/linux-2.6.28/ cp /usr/src/netfilter-layer7-v2.22/iptables-1.4.3forward-for-kernel-2.6.20forward/*.* extensions/ ./configure --with-ksource=/usr/src/linux-2.6.28 make make install

安装 Layer 7协议

cd l7-protocols-2009-05-28/ make install

测试

iptables -V iptables -m layer7 –help

最后实例：

iptables -A FORWARD -m layer7 --l7proto qq -j DROP

成功