CTL_CODE

 

CTL_CODE说明  

我们在说DeviceIoControl函数时其第二个参数dwIoControlCode就是由CTL_CODE宏定义的，下边我们可以了解一下CTL_CODE的内容。

CTL_CODE：用于创建一个唯一的32位系统I/O控制代码，这个控制代码包括4部分组成：DeviceType（设备类型，高16位（16-31位）），Access（访问限制，14-15位），Function（功能2-13位），Method（I/O访问内存使用方式）。

This macro creates a unique system I/O control code (IOCTL).

#define CTL_CODE(DeviceType, Function, Method, Access) ( ((DeviceType) << 16) | ((Access) << 14) | ((Function) << 2) | (Method))

Parameters（参数）

DeviceType

Defines the type of device for the given IOCTL.

This parameter can be no bigger than a WORD value.

The values used by Microsoft are in the range 0-32767; the values 32768-65535 are reserved for use by OEMs and IHVs.

The following device types are defined by the system:

• FILE_DEVICE_BEEP
• FILE_DEVICE_CD_ROM
• FILE_DEVICE_CD_ROM_FILE_SYSTEM
• FILE_DEVICE_CONTROLLER
• FILE_DEVICE_DATALINK
• FILE_DEVICE_DFS
• FILE_DEVICE_DISK
• FILE_DEVICE_DISK_FILE_SYSTEM
• FILE_DEVICE_FILE_SYSTEM
• FILE_DEVICE_INPORT_PORT
• FILE_DEVICE_KEYBOARD
• FILE_DEVICE_MAILSLOT
• FILE_DEVICE_MIDI_IN
• FILE_DEVICE_MIDI_OUT
• FILE_DEVICE_MOUSE
• FILE_DEVICE_MULTI_UNC_PROVIDER
• FILE_DEVICE_NAMED_PIPE
• FILE_DEVICE_NETWORK
• FILE_DEVICE_NETWORK_BROWSER
• FILE_DEVICE_NETWORK_FILE_SYSTEM
• FILE_DEVICE_NULL
• FILE_DEVICE_PARALLEL_PORT
• FILE_DEVICE_PHYSICAL_NETCARD
• FILE_DEVICE_PRINTER
• FILE_DEVICE_SCANNER
• FILE_DEVICE_SERIAL_MOUSE_PORT
• FILE_DEVICE_SERIAL_PORT
• FILE_DEVICE_SCREEN
• FILE_DEVICE_SOUND
• FILE_DEVICE_DEVICE_STREAMS
• FILE_DEVICE_TAPE
• FILE_DEVICE_TAPE_FILE_SYSTEM
• FILE_DEVICE_TRANSPORT
• FILE_DEVICE_UNKNOWN
• FILE_DEVICE_VIDEO
• FILE_DEVICE_VIRTUAL_DISK
• FILE_DEVICE_WAVE_IN
• FILE_DEVICE_WAVE_OUT
• FILE_DEVICE_8042_PORT
• FILE_DEVICE_NETWORK_REDIRECTOR
• FILE_DEVICE_BATTERY
• FILE_DEVICE_BUS_EXTENDER
• FILE_DEVICE_MODEM
• FILE_DEVICE_VDM
• FILE_DEVICE_MASS_STORAGE
• FILE_DEVICE_SMB
• FILE_DEVICE_KS
• FILE_DEVICE_CHANGER
• FILE_DEVICE_SMARTCARD
• FILE_DEVICE_ACPI
• FILE_DEVICE_DVD
• FILE_DEVICE_FULLSCREEN_VIDEO
• FILE_DEVICE_DFS_FILE_SYSTEM
• FILE_DEVICE_DFS_VOLUME

The following device types are specific to Windows CE:

• FILE_DEVICE_HAL
• FILE_DEVICE_CONSOLE
• FILE_DEVICE_PSL
• FILE_DEVICE_SERVICE

Function

Defines an action within the device category.

Function codes 0-2047 are reserved for Microsoft; codes 2048-4095 are reserved for OEMs and IHVs.

A function code can be no larger then 4095.

Method

Defines the method codes for how buffers are passed for I/O and file system controls.

The following values are possible for this parameter:

• METHOD_BUFFERED
• METHOD_IN_DIRECT
• METHOD_OUT_DIRECT
• METHOD_NEITHER

This field is ignored by Windows CE. You should always use the METHOD_BUFFERED value unless compatibility with Windows-based desktop platforms is required using a different Method value.

Access

Defines the access check value for any access.

The following table shows the possible flags for this parameter. The FILE_ACCESS_ANY is generally the correct value.

Flag	Description
FILE_ANY_ACCESS	Request all access.
FILE_READ_ACCESS	Request read access. Can be used with FILE_WRITE_ACCESS.
FILE_WRITE_ACCESS	Request write access. Can be used with FILE_READ_ACCESS.

Return Values（返回值）

None.

Remarks（备注）

The macro can be used for defining IOCTL and FSCTL function control codes. All IOCTLs must be defined this way to ensure that values used by Microsoft, OEMs, and IHVs do not overlap.

The following illustration shows the format of the resulting IOCTL.

 

举例说明一下：

我定义两个IOCTL,一个用于对设备的读，一个用于对设备的写

#define ATST2004_IOCTL_READ CTL_CODE(FILE_DEVICE_UNKNOWN, 0x800, METHOD_BUFFERED, FILE_READ_DATA)

#define ATST2004_IOCTL_WRITE CTL_CODE(FILE_DEVICE_UNKNOWN, 0x801, METHOD_BUFFERED, FILE_WRITE_DATA)

在VC中使用不需要进行处理，假如我要在VB中使用这两个IOCTL，就需要进行查值计算了，计算后定义如下：

Private Const ATST2004_IOCTL_READ = &H226000

Private Const ATST2004_IOCTL_WRITE = &H22A004