LR监控linux之详解rstatd的安装-Zee

LR监控linux之详解rstatd的安装-Zee

LR监控linux之详解rstatd的安装-Zee

 

 

1.    前期准备：

 

 

1, 把 rstatd 文件解压到要监控的机器上。

2, 打开终端，定位到 rstatd 文件夹下：查看文件夹中的内容如下：

[root@localhost rpc.rstatd]# ls aclocal.m4    COPYING     Makefile.am    README        rstat_proc.c rup.1 config.h.in   CVS         Makefile.in    rpc.rstatd.8 rstat.x       rup.c configure     INSTALL     missing        rstatd.8      rsysinfo.1    stamp-h.in configure.in install-sh mkinstalldirs rstat_main.c rsysinfo.c

 

 

 

2.    执行如下步骤：

 

 

2.1.                   执行：./configure 命令

 

 

[root@localhost rpc.rstatd]# ./configure creating cache ./config.cache checking for a BSD compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking whether make sets ${MAKE}... yes checking for working aclocal... found checking for working autoconf... found checking for working automake... found checking for working autoheader... found checking for working makeinfo... found checking for gawk... gawk checking for gcc... gcc checking whether the C compiler (gcc ) works... yes checking whether the C compiler (gcc ) is a cross-compiler... no checking whether we are using GNU C... yes checking whether gcc accepts -g... yes checking for a BSD compatible install... /usr/bin/install -c checking whether ln -s works... yes checking whether make sets ${MAKE}... (cached) yes checking how to run the C preprocessor... gcc -E checking for sys/ioctl.h... yes checking for syslog.h... yes checking whether time.h and sys/time.h may both be included... yes checking whether gcc needs -traditional... no checking for ANSI C header files... yes checking return type of signal handlers... void updating cache ./config.cache creating ./config.status kcreating Makefile creating config.h

 

 

 

2.2.                   执行：make 命令。

 

 

[root@localhost rpc.rstatd]# make rm -f rstat.h rpcgen -h -o rstat.h rstat.x gcc -DHAVE_CONFIG_H -I. -I. -I.     -g -O2 -c rup.c rup.c: In function ' ointopoint_v5 ' : rup.c:256: warning: passing argument 6 of 'c lient->cl_ops->cl_call ' ?from incompatible pointer type rup.c: In function ' ointopoint_v3 ' ? rup.c:292: warning: passing argument 6 of 'c lient->cl_ops->cl_call ' ?from incompatible pointer type rup.c: In function 'm ain ' ? rup.c:317: warning: return type of 'm ain ' ?is not 'i nt ' ?rm -f rstat_xdr.c rpcgen -c -o rstat_xdr.c rstat.x gcc -DHAVE_CONFIG_H -I. -I. -I.     -g -O2 -c rstat_xdr.c rm -f rstat_clnt.c rpcgen -l -o rstat_clnt.c rstat.x gcc -DHAVE_CONFIG_H -I. -I. -I.     -g -O2 -c rstat_clnt.c gcc -g -O2 -o rup rup.o rstat_xdr.o rstat_clnt.o  gcc -DHAVE_CONFIG_H -I. -I. -I.     -g -O2 -c rsysinfo.c rsysinfo.c: In function ' ointopoint_v3 ' ? rsysinfo.c:136: warning: passing argument 6 of 'c lient->cl_ops->cl_call ' ?from incompatible pointer type rsysinfo.c: In function 'm ain ' ? rsysinfo.c:160: warning: return type of 'm ain ' ?is not 'i nt ' ?gcc -g -O2 -o rsysinfo rsysinfo.o rstat_xdr.o rstat_clnt.o  rm -f rstat_svc.c rpcgen -m -o rstat_svc.c rstat.x gcc -DHAVE_CONFIG_H -I. -I. -I.     -g -O2 -c rstat_svc.c gcc -DHAVE_CONFIG_H -I. -I. -I.     -g -O2 -c rstat_proc.c gcc -DHAVE_CONFIG_H -I. -I. -I.     -g -O2 -c rstat_main.c rstat_main.c: In function 'm ain ' ? rstat_main.c:82: warning: return type of 'm ain ' ?is not 'i nt ' ?gcc -g -O2 -o rpc.rstatd rstat_svc.o rstat_xdr.o rstat_proc.o rstat_main.o

这之后可以执行 :make check检查一下。

 

 

2.3.                   执行：make install 命令。

 

 

[root@localhost rpc.rstatd]# make install make[1]: Entering directory `/opt/rpc.rstatd' /bin/sh ./mkinstalldirs /usr/local/bin  /usr/bin/install -c rup /usr/local/bin/rup  /usr/bin/install -c rsysinfo /usr/local/bin/rsysinfo /bin/sh ./mkinstalldirs /usr/local/sbin  /usr/bin/install -c rpc.rstatd /usr/local/sbin/rpc.rstatd make[1]: Nothing to be done for `install-data-am'. make[1]: Leaving directory `/opt/rpc.rstatd'

 

 

2.4.                   执行：./rpc.rstatd 命令。启动rpc服务。

 

 

注：无回显为成功。

 

[root@localhost rpc.rstatd]# ./rpc.rstatd

 

 

 

2.5.                   执行：rpcinfo –p 命令。检查rpc服务的状态.

 

 

[root@localhost rpc.rstatd]# rpcinfo -p    program vers proto   port     100000    2   tcp    111 portmapper     100000    2   udp    111 portmapper     100024    1   udp    797 status     100024    1   tcp    800 status     100001    5   udp    900 rstatd     100001    3   udp    900 rstatd     100001    2   udp    900 rstatd     100001    1   udp    900 rstatd [root@localhost rpc.rstatd]#

 

 

3.    可能会出现的错误：

 

1,若RPC服务没有成功启动。

2,若目标主机上开启了防火墙，阻挡了RPC服务。

在LR中添加时可能会出现如下错误：

Monitor name :UNIX Resources. Cannot initialize the monitoring on 10.1.200.65. Error while creating the RPC client. Ensure that the machine can be connected and that it runs the rstat daemon (use rpcinfo utility for this verification). Detailed error: RPC: Failed to create RPC client. RPC-TCP: Failed to establish RPC server address. RPC-TCP: RPC Server <100001, 3, 17> is not registered on host '10.1.200.65'. (entry point: CFactory::Initialize).   [MsgId: MMSG-47190]

 

Monitor name :UNIX Resources. Internal rpc error (error code:2). Machine: 10.1.200.65. Hint: Check that RPC on this machine is up and running. Check that rstat daemon on this machine is up and running (use rpcinfo utility for this verification). Details: RPC: RPC call failed. RPC-TCP: recv()/recvfrom() failed. RPC-TCP: Timeout reached. (entry point: Factory::CollectData). [MsgId: MMSG-47197]

 

至此完毕。