kiwi开发环境配置
CentOS6
1)mount第三方库
手动mount第三方库
su root
mkdir /mnt/vendor
mount -t cifs -o username="administrator",password="" //192.168.1.170/vendor /mnt/vendor
自动mount第三方库
编辑/etc/rc.d/rc.local,追加以下内容
mkdir /mnt/vendor
mount -t cifs -o username="administrator",password="" //192.168.1.170/vendor /mnt/vendor
mount -t cifs -o username="ming",password="m" //192.168.1.170/kiwi /mnt/kiwi
2)编译ACE-6.1.1
http://www.cs.wustl.edu/~schmidt/ACE.html
#export ACE_ROOT=/svn/kiwi/vendor_linux/ACE/ACE-6.1.1/ACE_wrappers
创建$ACE_ROOT/ace/config.h
#vi $ACE_ROOT/ace/config.h
内容如下：
#define ACE_USES_WCHAR
#include "ace/config-linux.h"
支持epoll
#vi $ACE_ROOT/ace/config-linux.h
增加如下内容
#define ACE_HAS_EVENT_POLL
创建$ACE_ROOT/include/makeinclude/platform_macros.GNU
#vi $ACE_ROOT/include/makeinclude/platform_macros.GNU
内容如下：
include $(ACE_ROOT)/include/makeinclude/platform_linux.GNU
#cd $ACE_ROOT
#make
3）编译boost
编译bjam
#export BOOST_ROOT=/svn/kiwi/vendor_linux/boost/boost_1_48_0
#cd $BOOST_ROOT
#./bootstrap.sh
编译boost
#./bjam --toolset=gcc stage debug threading=multi link=shared
2)编译xerces-c 2.8.0
#export XERCESCROOT=/svn/kiwi/vendor_linux/xerces/xerces-c-src_2_8_0
#cd $XERCESCROOT/src/xercesc/
#./runConfigure -plinux -cgcc -xg++ -minmem -nsocket -tnative -rpthread
若出现“/bin/sh^M:bad interpreter 没有那个文件或目录”错误字样，原因为脚本文件为dos格式，需要将其转换为unix格式。
#vim configure
:set ff=unix
:wq!
#vim config.sub
:set ff=unix
:wq!
#vim config.guess
:set ff=unix
:wq!
#vim runConfigure
:set ff=unix
:wq!
再次运行
#./runConfigure -plinux -cgcc -xg++ -minmem -nsocket -tnative -rpthread
#make
--#make install
--注意：这里需要make install安装xercesc库，因为xalan的安装需要用到该库
4）编译Xalan-C++ 1.10(无需编译）
http://xml.apache.org/xalan-c/
#export XERCESCROOT=/vendor/xerces/xerces-c-src_2_8_0/src
#export XALANCROOT=/vendor/xalan-c/Xalan-C_1_10_0-src/xml-xalan/c
#cd $XALANCROOT
#./runConfigure -p linux -c gcc -x g++
#make
出现如下错误：
/vendor/xalan-c/Xalan-C_1_10_0-src/xml-xalan/c/src/xalanc/XalanDOM/XalanDOMString.cpp:251: 错误：‘memmove’在此作用域中尚未声明
/vendor/xalan-c/Xalan-C_1_10_0-src/xml-xalan/c/src/xalanc/XalanDOM/XalanDOMString.cpp: In static member function ‘static xalanc_1_10::XalanDOMString::size_type xalanc_1_10::XalanDOMString::length(const char*)’:
/vendor/xalan-c/Xalan-C_1_10_0-src/xml-xalan/c/src/xalanc/XalanDOM/XalanDOMString.cpp:780: 错误：‘strlen’在此作用域中尚未声明
#vi /vendor/xalan-c/Xalan-C_1_10_0-src/xml-xalan/c/src/xalanc/XalanDOM/XalanDOMString.cpp
在XalanDOMString.cpp中添加如下
#include <string.h>
/vendor/xalan-c/Xalan-C_1_10_0-src/xml-xalan/c/src/xalanc/XMLSupport/FormatterToHTML.cpp:175: 错误：‘memset’在此作用域中尚未声明
#vi /vendor/xalan-c/Xalan-C_1_10_0-src/xml-xalan/c/src/xalanc/XMLSupport/FormatterToHTML.cpp
在FormatterToHTML.cpp中添加如下
#include <string.h>
/vendor/xalan-c/Xalan-C_1_10_0-src/xml-xalan/c/src/xalanc/XSLT/ElemNumber.cpp:1472: 错误：‘memset’在此作用域中尚未声明
#vi /vendor/xalan-c/Xalan-C_1_10_0-src/xml-xalan/c/src/xalanc/XSLT/ElemNumber.cpp
在ElemNumber.cpp中添加如下
#include <string.h>
/vendor/xalan-c/Xalan-C_1_10_0-src/xml-xalan/c/src/xalanc/PlatformSupport/DirectoryEnumerator.hpp:346: 错误：‘strlen’在此作用域中尚未声明
#vi /vendor/xalan-c/Xalan-C_1_10_0-src/xml-xalan/c/src/xalanc/PlatformSupport/DirectoryEnumerator.hpp
在DirectoryEnumerator.hpp中添加如下
#include <string.h>
5)安装unixODBC-2.3.0
获取地址：http://www.unixodbc.org/
#cd /svn/kiwi/vendor_linux/unixODBC/unixODBC-2.3.0
--注释此行#./configure --prefix=/usr --enable-driver-conf --enable-drivers CPPFLAGS="-DSQL_WCHART_CONVERT -DUNICODE"
#./configure --prefix=/usr
#make
#make install
#vi /etc/profile
追加如下信息：
export ODBCINI=/usr/etc/odbc.ini
export ODBCSYSINI=/usr/etc
#vi /usr/etc/odbcinst.ini
[mysql]
Description = mysql
Driver = /vendor/odbcdriver/mysql-connector-odbc-5.2.4-linux-glibc2.5-x86-32bit/lib/libmyodbc5w.so
Driver64 = /vendor/odbcdriver/mysql-connector-odbc-5.2.4-linux-glibc2.5-x86-64bit/lib/libmyodbc5w.so
Setup =
Setup64 =
UsageCount = 1
CPTimeout =
CPReuse =
#vi /usr/etc/odbc.ini
[sevs_mdb]
Description = mysql
Driver = mysql
Server = 192.168.1.170
Database = gyb_mdb_2_5_1
Port = 3306
Socket =
Option =
Stmt =
测试odbc
#isql
若出现如下错误：
isql: error while loading shared libraries: libodbc.so.1: cannot open shared object file: No such file or directory
请将/usr/lib配置为搜索路径
#vi /etc/bashrc
在最后最加入下内容
export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/usr/lib
6)编译和配置openssl 1.0.1c(使用系统自带openssl，无须构建openssl)
http://www.openssl.org/source/
4457113 May 10 17:20:24 2012 openssl-1.0.1c.tar.gz (MD5) (SHA1) (PGP sign) [LATEST]
#cd /svn/kiwi/vendor_linux/openssl/openssl-1.0.0
#./config shared
#make
#make test(可选)
#make install(可选)
7)berkeley db 4.7.25
http://www.oracle.com/technetwork/products/berkeleydb/downloads/index-082944.html
#cd /vendor/berkeleydb/db-4.7.25/build_unix
#../dist/configure
#make
8)构建zlib-1.2.7(使用系统自带libz，无须构建libz)
http://www.zlib.net/
#cd /svn/kiwi/vendor_linux/zlib/zlib-1.2.
--#make distclean
#./configure
#make
9)安装和配置oracle odbc
下载：
http://www.oracle.com/technetwork/topics/linuxsoft-082809.html
oracle-instantclient11.2-basic-11.2.0.3.0-1.i386.rpm (57,765,315 bytes) (cksum - 789342999)
oracle-instantclient11.2-odbc-11.2.0.3.0-1.i386.rpm (274,625 bytes) (cksum - 3210519758)
a)安装
#rpm -ivh oracle-instantclient11.2-basic-11.2.0.3.0-1.i386.rpm
#rpm -ivh oracle-instantclient11.2-odbc-11.2.0.3.0-1.i386.rpm
b)配置oracle odbc驱动
#vi /usr/etc/odbcinst.ini
[Oracle 11g ODBC driver]
Description = Oracle ODBC driver for Oracle 11g
Driver = /usr/lib/oracle/11.2/client/lib/libsqora.so.11.1
Setup =
FileUsage =
CPTimeout =
CPReuse =
#vi /usr/etc/odbc.ini
[MSCM]
Description = MSCM
Driver = Oracle 11g ODBC driver
Server = 192.168.1.104
ServerName = 192.168.1.104:1521/MSCM002
Port = 1521
UserID = mmr_app
password = mmr_APP_123
c)将oracle odbc库路径加入系统环境变量
#vi /etc/profile
追加如下信息：
#export LD_LIBRARY_PATH=/usr/lib/oracle/11.2/client/lib:$LD_LIBRARY_PATH
d)修改/etc/hosts文件，追加本机map，否则会报"ORA-21561: OID generation failed"错误
#vi /etc/hosts
追加如下信息：
192.168.1.171 centos62
其中centos62为本机主机名，可以通过hostname命令查看
e)isql MSCM mmr_app mmr_APP_123 -v
1)mount第三方库
手动mount第三方库
su root
mkdir /mnt/vendor
mount -t cifs -o username="administrator",password="" //192.168.1.170/vendor /mnt/vendor
自动mount第三方库
编辑/etc/rc.d/rc.local,追加以下内容
mkdir /mnt/vendor
mount -t cifs -o username="administrator",password="" //192.168.1.170/vendor /mnt/vendor
mount -t cifs -o username="ming",password="m" //192.168.1.170/kiwi /mnt/kiwi
2)编译ACE-6.1.1
http://www.cs.wustl.edu/~schmidt/ACE.html
#export ACE_ROOT=/svn/kiwi/vendor_linux/ACE/ACE-6.1.1/ACE_wrappers
创建$ACE_ROOT/ace/config.h
#vi $ACE_ROOT/ace/config.h
内容如下：
#define ACE_USES_WCHAR
#include "ace/config-linux.h"
支持epoll
#vi $ACE_ROOT/ace/config-linux.h
增加如下内容
#define ACE_HAS_EVENT_POLL
创建$ACE_ROOT/include/makeinclude/platform_macros.GNU
#vi $ACE_ROOT/include/makeinclude/platform_macros.GNU
内容如下：
include $(ACE_ROOT)/include/makeinclude/platform_linux.GNU
#cd $ACE_ROOT
#make
3）编译boost
编译bjam
#export BOOST_ROOT=/svn/kiwi/vendor_linux/boost/boost_1_48_0
#cd $BOOST_ROOT
#./bootstrap.sh
编译boost
#./bjam --toolset=gcc stage debug threading=multi link=shared
2)编译xerces-c 2.8.0
#export XERCESCROOT=/svn/kiwi/vendor_linux/xerces/xerces-c-src_2_8_0
#cd $XERCESCROOT/src/xercesc/
#./runConfigure -plinux -cgcc -xg++ -minmem -nsocket -tnative -rpthread
若出现“/bin/sh^M:bad interpreter 没有那个文件或目录”错误字样，原因为脚本文件为dos格式，需要将其转换为unix格式。
#vim configure
:set ff=unix
:wq!
#vim config.sub
:set ff=unix
:wq!
#vim config.guess
:set ff=unix
:wq!
#vim runConfigure
:set ff=unix
:wq!
再次运行
#./runConfigure -plinux -cgcc -xg++ -minmem -nsocket -tnative -rpthread
#make
--#make install
--注意：这里需要make install安装xercesc库，因为xalan的安装需要用到该库
4）编译Xalan-C++ 1.10(无需编译）
http://xml.apache.org/xalan-c/
#export XERCESCROOT=/vendor/xerces/xerces-c-src_2_8_0/src
#export XALANCROOT=/vendor/xalan-c/Xalan-C_1_10_0-src/xml-xalan/c
#cd $XALANCROOT
#./runConfigure -p linux -c gcc -x g++
#make
出现如下错误：
/vendor/xalan-c/Xalan-C_1_10_0-src/xml-xalan/c/src/xalanc/XalanDOM/XalanDOMString.cpp:251: 错误：‘memmove’在此作用域中尚未声明
/vendor/xalan-c/Xalan-C_1_10_0-src/xml-xalan/c/src/xalanc/XalanDOM/XalanDOMString.cpp: In static member function ‘static xalanc_1_10::XalanDOMString::size_type xalanc_1_10::XalanDOMString::length(const char*)’:
/vendor/xalan-c/Xalan-C_1_10_0-src/xml-xalan/c/src/xalanc/XalanDOM/XalanDOMString.cpp:780: 错误：‘strlen’在此作用域中尚未声明
#vi /vendor/xalan-c/Xalan-C_1_10_0-src/xml-xalan/c/src/xalanc/XalanDOM/XalanDOMString.cpp
在XalanDOMString.cpp中添加如下
#include <string.h>
/vendor/xalan-c/Xalan-C_1_10_0-src/xml-xalan/c/src/xalanc/XMLSupport/FormatterToHTML.cpp:175: 错误：‘memset’在此作用域中尚未声明
#vi /vendor/xalan-c/Xalan-C_1_10_0-src/xml-xalan/c/src/xalanc/XMLSupport/FormatterToHTML.cpp
在FormatterToHTML.cpp中添加如下
#include <string.h>
/vendor/xalan-c/Xalan-C_1_10_0-src/xml-xalan/c/src/xalanc/XSLT/ElemNumber.cpp:1472: 错误：‘memset’在此作用域中尚未声明
#vi /vendor/xalan-c/Xalan-C_1_10_0-src/xml-xalan/c/src/xalanc/XSLT/ElemNumber.cpp
在ElemNumber.cpp中添加如下
#include <string.h>
/vendor/xalan-c/Xalan-C_1_10_0-src/xml-xalan/c/src/xalanc/PlatformSupport/DirectoryEnumerator.hpp:346: 错误：‘strlen’在此作用域中尚未声明
#vi /vendor/xalan-c/Xalan-C_1_10_0-src/xml-xalan/c/src/xalanc/PlatformSupport/DirectoryEnumerator.hpp
在DirectoryEnumerator.hpp中添加如下
#include <string.h>
5)安装unixODBC-2.3.0
获取地址：http://www.unixodbc.org/
#cd /svn/kiwi/vendor_linux/unixODBC/unixODBC-2.3.0
--注释此行#./configure --prefix=/usr --enable-driver-conf --enable-drivers CPPFLAGS="-DSQL_WCHART_CONVERT -DUNICODE"
#./configure --prefix=/usr
#make
#make install
#vi /etc/profile
追加如下信息：
export ODBCINI=/usr/etc/odbc.ini
export ODBCSYSINI=/usr/etc
#vi /usr/etc/odbcinst.ini
[mysql]
Description = mysql
Driver = /vendor/odbcdriver/mysql-connector-odbc-5.2.4-linux-glibc2.5-x86-32bit/lib/libmyodbc5w.so
Driver64 = /vendor/odbcdriver/mysql-connector-odbc-5.2.4-linux-glibc2.5-x86-64bit/lib/libmyodbc5w.so
Setup =
Setup64 =
UsageCount = 1
CPTimeout =
CPReuse =
#vi /usr/etc/odbc.ini
[sevs_mdb]
Description = mysql
Driver = mysql
Server = 192.168.1.170
Database = gyb_mdb_2_5_1
Port = 3306
Socket =
Option =
Stmt =
测试odbc
#isql
若出现如下错误：
isql: error while loading shared libraries: libodbc.so.1: cannot open shared object file: No such file or directory
请将/usr/lib配置为搜索路径
#vi /etc/bashrc
在最后最加入下内容
export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/usr/lib
6)编译和配置openssl 1.0.1c(使用系统自带openssl，无须构建openssl)
http://www.openssl.org/source/
4457113 May 10 17:20:24 2012 openssl-1.0.1c.tar.gz (MD5) (SHA1) (PGP sign) [LATEST]
#cd /svn/kiwi/vendor_linux/openssl/openssl-1.0.0
#./config shared
#make
#make test(可选)
#make install(可选)
7)berkeley db 4.7.25
http://www.oracle.com/technetwork/products/berkeleydb/downloads/index-082944.html
#cd /vendor/berkeleydb/db-4.7.25/build_unix
#../dist/configure
#make
8)构建zlib-1.2.7(使用系统自带libz，无须构建libz)
http://www.zlib.net/
#cd /svn/kiwi/vendor_linux/zlib/zlib-1.2.
--#make distclean
#./configure
#make
9)安装和配置oracle odbc
下载：
http://www.oracle.com/technetwork/topics/linuxsoft-082809.html
oracle-instantclient11.2-basic-11.2.0.3.0-1.i386.rpm (57,765,315 bytes) (cksum - 789342999)
oracle-instantclient11.2-odbc-11.2.0.3.0-1.i386.rpm (274,625 bytes) (cksum - 3210519758)
a)安装
#rpm -ivh oracle-instantclient11.2-basic-11.2.0.3.0-1.i386.rpm
#rpm -ivh oracle-instantclient11.2-odbc-11.2.0.3.0-1.i386.rpm
b)配置oracle odbc驱动
#vi /usr/etc/odbcinst.ini
[Oracle 11g ODBC driver]
Description = Oracle ODBC driver for Oracle 11g
Driver = /usr/lib/oracle/11.2/client/lib/libsqora.so.11.1
Setup =
FileUsage =
CPTimeout =
CPReuse =
#vi /usr/etc/odbc.ini
[MSCM]
Description = MSCM
Driver = Oracle 11g ODBC driver
Server = 192.168.1.104
ServerName = 192.168.1.104:1521/MSCM002
Port = 1521
UserID = mmr_app
password = mmr_APP_123
c)将oracle odbc库路径加入系统环境变量
#vi /etc/profile
追加如下信息：
#export LD_LIBRARY_PATH=/usr/lib/oracle/11.2/client/lib:$LD_LIBRARY_PATH
d)修改/etc/hosts文件，追加本机map，否则会报"ORA-21561: OID generation failed"错误
#vi /etc/hosts
追加如下信息：
192.168.1.171 centos62
其中centos62为本机主机名，可以通过hostname命令查看
e)isql MSCM mmr_app mmr_APP_123 -v