[Windows+Phone+7]+c#编码规范
Windows Phone 7的项目开始了，但公司没有相关的Coding Standards, 因此在国外网站上找了一份感觉比较靠谱的，以后就用这个了。翻译就没有必要了吧，程序员英文不好是很悲剧的，看不懂的好好学学英语吧，至少也要有cet6的阅读水平吧，不然学东西就累了。
原文 http://www.codeproject.com/KB/cs/c__coding_standards.aspx
Introduction
Believe it: majority of the programmers write "working code," but not "efficient code." As we mentioned in the beginning of this tutorial, do you want to become the "Most Valued Professional" of your company? Writing "efficient code" is an art that you must learn and practice.
Naming Conventions and Standards
- Pascal casing: the first character of all words is upper case and the other characters are lower case.
- Camel casing: the first character of all words, except the first word, is upper case and other characters are lower case.
Use Pascal casing for class names:
Collapse
| Copy Code
public class HelloWorld { ... }
Use Pascal casing for method names:
Collapse
| Copy Code
public class HelloWorld { void SayHello(string name) { ... } }
Use Camel casing for variables and method parameters:
Collapse
| Copy Code
public class HelloWorld { int totalCount = 0; void SayHello(string name) { string fullMessage = "Hello " + name; ... } }
Do not use Hungarian notation to name variables. In earlier days, most programmers liked it: having the data type as a prefix for the variable name and using m_ as the prefix for member variables, e.g:
Collapse
| Copy Code
string m_sName; int nAge;
However, in .NET coding standards, this is not recommended. Usage of data type and M_ to represent member variables should not be done. All variables should use Camel casing. Use meaningful, descriptive words to name variables:
- Do not use abbreviations. Use
name,address,salaryetc. instead ofnam,addr,sal. - Do not use single character variable names like
i,n,x, etc. Use names likeindexandtemp.
One exception in this case would be variables used for iterations in loops:
Collapse
| Copy Code
for ( int i = 0; i < count; i++ ) { ... }
If the variable is used only as a counter for iteration and is not used anywhere else in the loop, many people still like to use a single char variable (i) instead of inventing a different suitable name.
- Do not use underscores (_) in variable names.
- Namespace names should follow the standard pattern.
Collapse
| Copy Code
<company name>.<product name>.<top level module>.<bottom level module>
File name should match with class name. For example, for the class HelloWorld, the file name should behelloworld.cs (or helloworld.vb).
Indentation and spacing: use TAB for indentation. Do not use spaces.
Comments should be in the same level as the code. Curly braces ( {} ) should be in the same level as the code outside the braces. Use one blank line to separate logical groups of code.
Collapse
| Copy Code
bool SayHello (string name) { string fullMessage = "Hello " + name; DateTime currentTime = DateTime.Now; string message = fullMessage + ", the time is : " + currentTime.ToShortTimeString(); MessageBox.Show ( message ); if ( ... ) { // Do something // ... return false; } return true; }
This code looks better than the code shown above:
Collapse
| Copy Code
bool SayHello ( string name ) { string fullMessage = "Hello " + name; DateTime currentTime = DateTime.Now; string message = fullMessage + ", the time is : " + currentTime.ToShortTimeString(); MessageBox.Show ( message ); if ( ... ) { // Do something // ... return false; } return true; }
There should be one and only one single blank line between each method inside the class. The curly braces should be on a separate line and not in the same line as if, for, etc.
Good:
Collapse
| Copy Code
if ( ... ) { // Do something }
Not good:
Collapse
| Copy Code
if ( ... ) { // Do something }
Use a single space before and after each operator and brackets.
Good:
Collapse
| Copy Code
if ( showResult == true ) { for ( int i = 0; i < 10; i++ ) { // } }
Not good:
Collapse
| Copy Code
if(showResult==true) { for(int i= 0;i<10;i++) { // } }
Good Programming Practices
Avoid having too-large files. If a file has more than 300-400 lines of code, you must consider refactoring the code into helper classes. Avoid writing very long methods. A method should typically have 1-25 lines of code. If a method has more than 25 lines of code, you must consider refactoring it into separate methods. The method's name should tell what it does. Do not use misleading names. If the method name is obvious, there is no need of documentation explaining what the method does.
Good:
Collapse
| Copy Code
void SavePhoneNumber ( string phoneNumber ) { // Save the phone number. }
Not good:
Collapse
| Copy Code
// This method will save the phone number. void SaveData ( string phoneNumber ) { // Save the phone number. }
A method should do only "one job." Do not combine more than one job in a single method, even if those jobs are very small.
Good:
Collapse
| Copy Code
// Save the address. SaveAddress ( address ); // Send an email to the supervisor to inform that the address is updated. SendEmail ( address, email ); void SaveAddress ( string address ) { // Save the address. // ... } void SendEmail ( string address, string email ) { // Send an email to inform the supervisor that the address is changed. // ... }
Not good:
Collapse
| Copy Code
// Save address and send an email to the supervisor // to inform that the address is updated. SaveAddress ( address, email ); void SaveAddress ( string address, string email ) { // Job 1. // Save the address. // ... // Job 2. // Send an email to inform the supervisor that the address is changed. // ... }
Use the C# or VB.NET specific types, rather than the alias types defined in the System namespace.
Good:
Collapse
| Copy Code
int age; string name; object contactInfo;
Not good:
Collapse
| Copy Code
Int16 age; String name; Object contactInfo;
Do not hardcode numbers. Use constants instead. Do not hardcode strings. Use resource files. Avoid using many member variables. Declare local variables and pass them to methods instead of sharing a member variable between methods. If you share a member variable between methods, it will be difficult to track which method changed the value and when. Use enum wherever required. Do not use numbers or strings to indicate discrete values.
Good:
Collapse
| Copy Code
enum MailType { Html, PlainText, Attachment } void SendMail (string message, MailType mailType) { switch ( mailType ) { case MailType.Html: // Do something break; case MailType.PlainText: // Do something break; case MailType.Attachment: // Do something break; default: // Do something break; } }
Not good:
Collapse
| Copy Code
void SendMail (string message, string mailType) { switch ( mailType ) { case "Html": // Do something break; case "PlainText": // Do something break; case "Attachment": // Do something break; default: // Do something break; } }
Do not make the member variables public or protected. Keep them private and expose public/protectedproperties. Never hardcode a path or drive name in code. Get the application path programmatically and use relative path. Never assume that your code will run from drive C:. You never know; some users may run it from a network or from a Z:.
In the application start-up, do some kind of "self check" and ensure that all required files and dependencies are available in the expected locations. Check for database connections at start-up, if required. Give a friendly message to the user in case of any problems.
If the required configuration file is not found, the application should be able to create one with default values. If a wrong value is found in the configuration file, the application should throw an error or give a message and also should tell the user what the correct values are.
Error messages should help the user to solve the problem. Never give error messages like "Error in Application," "There is an error," etc. Instead, give specific messages like "Failed to update database. Please make sure the login ID and password are correct."
When displaying error messages, in addition to telling what is wrong, the message should also tell what the user should do to solve the problem. Instead of a message like "Failed to update the database," suggest what the user should do: "Failed to update database. Please make sure the login ID and password are correct."
Show short and friendly messages to the user, but log the actual error with all possible information. This will help a lot in diagnosing problems.
Comments
Do not write comments for every line of code and every variable declared. Write comments wherever required. Good, readable code will require very few comments. If all variables and method names are meaningful, that will make the code very readable and it will not need much commenting. Fewer lines of comments will make the code more elegant. However, if the code is not clean/readable and there are fewer comments, that is worse. If you have to use some complex or weird logic for any reason, document it very well with sufficient comments. If you initialize a numeric variable to a special number other than 0, -1, etc., document the reason for choosing that value. The bottom line is: write clean, readable code in such a way that it doesn't need any comments to understand it. Do a spell check on comments and also make sure that proper grammar and punctuation are used.
Exception Handling
Never do a "catch exception and do nothing." If you hide an exception, you will never know if the exception happened or not. In the case of exceptions, give a friendly message to the user, but log the actual error with all possible details about the error, including the time it occurred, the method and class name, etc. Always catch only the specific exception, not generic exceptions.
Good:
Collapse
| Copy Code
void ReadFromFile ( string fileName ) { try { // read from file. } catch (FileIOException ex) { // log error. // re-throw exception depending on your case. throw; } }
Not good:
Collapse
| Copy Code
void ReadFromFile ( string fileName ) { try { // read from file. } catch (Exception ex) { // Catching general exception is bad... we will never know whether it // was a file error or some other error. // Here you are hiding an exception. // In this case no one will ever know that an exception happened. return ""; } }
There's no need to catch the general exception in all your methods. Leave it open and let the application crash. This will help you find most of the errors during the development cycle. You can have an application level (thread level) error handler where you can handle all general exceptions. In the case of an "unexpected general error," this error handler should catch the exception and should log the error, in addition to giving a friendly message to the user before closing the application or allowing the user to "ignore and proceed."
Do not write try-catch in all your methods. Use it only if there is a possibility that a specific exception may occur. For example, if you are writing into a file, handle only FileIOException.
Do not write very large try-catch blocks. If required, write a separate try-catch for each task you perform and enclose only the specific piece of code inside the try-catch. This will help you find which piece of code generated the exception and you can give specific error messages to the user.
You may write your own custom exception classes, if required, in your application. Do not derive your custom exceptions from the base class SystemException. Instead, inherit from ApplicationException.
License
This article has no explicit license attached to it but may contain usage terms in the article text or the download files themselves. If in doubt please contact the author via the discussion board below.
A list of licenses authors might use can be found here