How to mount ntfs external USB drive to CentOS 5，CentOS挂载移动硬盘
今天用CentOS挂载移动硬盘除了一些问题，就google了一下，这篇文章解决了我的问题。
3Q!
加粗部分为操作的command！！
This will make READONLY NTFS External USD Drive for Linux Operating System. You cannot write from Linux! 实际上可以读写的！！！
I just tried, it took me 15-30 minutes to start and setup.
Hence, this is workable solution. If you have any issues, update in comment.
I will try to help you!
First you need ntfs mount. For that you need to install two packages.
1、This gets your ntfs-3g
wget http://marush.com/wp-content/uploads/2009/03/ntfs-3g-200921-el5i686.rpm
Then run to install ntfs-3g
rpm -ihv ntfs-3g-200921-el5i686.rpm
Second get this fuse (I do not know why. Without fuse you can not mount ntfs-3g. Please go through fuse sourceforge document.)
mount /dev/sdb1 /500gb -t ntfs-3g -r -o umask=0222
已经可以开始读文件了，但不能写！
2、wget http://superb-east.dl.sourceforge.net/sourceforge/fuse/fuse-2.6.0.tar.gz
如果下载不到可以google一下，我下载的是2.7.4版本
Then execute the following
tar xvfz fuse-2.7.4.tar
It creates a directory “fuse-2.7.4″
cd fuse-2.7.4
Execute
./configure
make
make install
3、测试
Then try
fdisk -l /dev/hda
You get
[root@prod soft]# fdisk -l /dev/hda
Disk /dev/hda: 536 MB, 536870912 bytes
32 heads, 63 sectors/track, 520 cylinders
Units = cylinders of 2016 * 512 = 1032192 bytes
Device Boot Start End Blocks Id System
/dev/hda1 1 20 20128+ 7 HPFS/NTFS
/dev/hda2 21 40 20160 4 FAT16 <32M
/dev/hda3 41 121 81648 b W95 FAT32
Mount with following command.
Here you go!
mkdir /mnt/ntfs
mount /dev/sdb1 /500gb -t ntfs-3g -r -o umask=0222
mount -t ntfs-3g /dev/hda1 /mnt/ntfs
cd /mnt/ntfs
cp 20m.txt test.txt
cd /
umount /mnt/ntfs
mount -t ntfs-3g /dev/hda1 /mnt/ntfs
cat /mnt/ntfs/test.txt
Check your drive now