C3P0连接池配置
C3P0是一个开源的JDBC连接池。
在Spring中，C3P0的一些配置，介绍如下（只列了一部分，不是全部）
<!-- c3p0连接池配置 -->
<bean id="dataSource" class="com.mchange.v2.c3p0.ComboPooledDataSource">
<!-- 用户名-->
<property name="user" value="${username}"/>
<!-- 用户密码-->
<property name="password" value="${password}"/>
<property name="driverClass" value="${driver_class}"/>
<property name="jdbcUrl" value="${url}"/>
<!--连接池中保留的最大连接数。默认值: 15 -->
<property name="maxPoolSize" value="20"/>
<!-- 连接池中保留的最小连接数，默认为：3-->
<property name="minPoolSize" value="2"/>
<!-- 初始化连接池中的连接数，取值应在minPoolSize与maxPoolSize之间，默认为3-->
<property name="initialPoolSize" value="2"/>
<!--最大空闲时间，60秒内未使用则连接被丢弃。若为0则永不丢弃。默认值: 0 -->
<property name="maxIdleTime">60</property>
<!-- 当连接池连接耗尽时，客户端调用getConnection()后等待获取新连接的时间，超时后将抛出SQLException，如设为0则无限期等待。单位毫秒。默认: 0 -->
<property name="checkoutTimeout" value="3000"/>
<!--当连接池中的连接耗尽的时候c3p0一次同时获取的连接数。默认值: 3 -->
<property name="acquireIncrement" value="2"/>
<!--定义在从数据库获取新连接失败后重复尝试的次数。默认值: 30 ；小于等于0表示无限次-->
<property name="acquireRetryAttempts" value="0"/>
<!--重新尝试的时间间隔，默认为：1000毫秒-->
<property name="acquireRetryDelay" value="1000" />
<!--关闭连接时，是否提交未提交的事务，默认为false，即关闭连接，回滚未提交的事务 -->
<property name="autoCommitOnClose">false</property>
<!--c3p0将建一张名为Test的空表，并使用其自带的查询语句进行测试。如果定义了这个参数那么属性preferredTestQuery将被忽略。你不能在这张Test表上进行任何操作，它将只供c3p0测试使用。默认值: null -->
<property name="automaticTestTable">Test</property>
<!--如果为false，则获取连接失败将会引起所有等待连接池来获取连接的线程抛出异常，但是数据源仍有效保留，并在下次调用getConnection()的时候继续尝试获取连接。如果设为true，那么在尝试获取连接失败后该数据源将申明已断开并永久关闭。默认: false-->
<property name="breakAfterAcquireFailure">false</property>
<!--每60秒检查所有连接池中的空闲连接。默认值: 0，不检查 -->
<property name="idleConnectionTestPeriod">60</property>
<!--c3p0全局的PreparedStatements缓存的大小。如果maxStatements与maxStatementsPerConnection均为0，则缓存不生效，只要有一个不为0，则语句的缓存就能生效。如果默认值: 0-->
<property name="maxStatements">100</property>
<!--maxStatementsPerConnection定义了连接池内单个连接所拥有的最大缓存statements数。默认值: 0 -->
<property name="maxStatementsPerConnection"></property>
</bean>
==============================================================================================================
C3P0更详细的配置项及其含义，请参考：http://www.mchange.com/projects/c3p0/index.html，部分内容摘录如下：
| acquireIncrement acquireRetryAttempts acquireRetryDelay autoCommitOnClose automaticTestTable breakAfterAcquireFailure checkoutTimeout connectionCustomizerClassName connectionTesterClassName debugUnreturnedConnectionStackTraces factoryClassLocation |
forceIgnoreUnresolvedTransactions idleConnectionTestPeriod initialPoolSize maxAdministrativeTaskTime maxConnectionAge maxIdleTime maxIdleTimeExcessConnections maxPoolSize maxStatements maxStatementsPerConnection minPoolSize |
numHelperThreads overrideDefaultUser overrideDefaultPassword password preferredTestQuery propertyCycle testConnectionOnCheckin testConnectionOnCheckout unreturnedConnectionTimeout user usesTraditionalReflectiveProxies |
- acquireIncrement
-
Default: 3Determines how many connections at a time c3p0 will try to acquire when the pool is exhausted. [See "Basic Pool Configuration"]
- acquireRetryAttempts
-
Default: 30Defines how many times c3p0 will try to acquire a new Connection from the database before giving up. If this value is less than or equal to zero, c3p0 will keep trying to fetch a Connection indefinitely. [See "Configuring Recovery From Database Outages"]
- acquireRetryDelay
-
Default: 1000Milliseconds, time c3p0 will wait between acquire attempts. [See "Configuring Recovery From Database Outages"]
- autoCommitOnClose
-
Default: falseThe JDBC spec is unforgivably silent on what should happen to unresolved, pending transactions on Connection close. C3P0's default policy is to rollback any uncommitted, pending work. (I think this is absolutely, undeniably the right policy, but there is no consensus among JDBC driver vendors.) Setting autoCommitOnClose to true causes uncommitted pending work to be committed, rather than rolled back on Connection close. [ Note: Since the spec is absurdly unclear on this question, application authors who wish to avoid bugs and inconsistent behavior should ensure that all transactions are explicitly either committed or rolled-back before close is called.] [See "Configuring Unresolved Transaction Handling"]
- automaticTestTable
-
Default: nullIf provided, c3p0 will create an empty table of the specified name, and use queries against that table to test the Connection. If automaticTestTable is provided, c3p0 will generate its own test query, therefore any preferredTestQuery set will be ignored. You should not work with the named table after c3p0 creates it; it should be strictly for c3p0's use in testing your Connection. (If you define your own ConnectionTester, it must implement the QueryConnectionTester interface for this parameter to be useful.) [See "Configuring Connection Testing"]
- breakAfterAcquireFailure
-
Default: falseIf true, a pooled DataSource will declare itself broken and be permanently closed if a Connection cannot be obtained from the database after making acquireRetryAttempts to acquire one. If false, failure to obtain a Connection will cause all Threads waiting for the pool to acquire a Connection to throw an Exception, but the DataSource will remain valid, and will attempt to acquire again following a call to getConnection(). [See "Configuring Recovery From Database Outages"]
- checkoutTimeout
-
Default: 0The number of milliseconds a client calling getConnection() will wait for a Connection to be checked-in or acquired when the pool is exhausted. Zero means wait indefinitely. Setting any positive value will cause the getConnection() call to time-out and break with an SQLException after the specified number of milliseconds.
- connectionCustomizerClassName
-
Default: nullThe fully qualified class-name of an implememtation of the ConnectionCustomizer interface, which users can implement to set up Connections when they are acquired from the database, or on check-out, and potentially to clean things up on check-in and Connection destruction. If standard Connection properties (holdability, readOnly, or transactionIsolation) are set in the ConnectionCustomizer's onAcquire() method, these will override the Connection default values.
- connectionTesterClassName
-
Default: com.mchange.v2.c3p0.impl.DefaultConnectionTesterThe fully qualified class-name of an implememtation of the ConnectionTester interface, or QueryConnectionTester if you would like instances to have access to a user-configured preferredTestQuery. This can be used to customize how c3p0 DataSources test Connections, but with the introduction of automaticTestTable and preferredTestQuery configuration parameters, "rolling your own" should be overkill for most users. [See "Configuring Connection Testing"]
- debugUnreturnedConnectionStackTraces
-
Default: falseIf true, and if unreturnedConnectionTimeout is set to a positive value, then the pool will capture the stack trace (via an Exception) of all Connection checkouts, and the stack traces will be printed when unreturned checked-out Connections timeout. This is intended to debug applications with Connection leaks, that is applications that occasionally fail to return Connections, leading to pool growth, and eventually exhaustion (when the pool hits maxPoolSize with all Connections checked-out and lost). This parameter should only be set while debugging, as capturing the stack trace will slow down every Connection check-out.Does Not Support Per-User Overrides.
- factoryClassLocation
-
Default: nullDataSources that will be bound by JNDI and use that API's Referenceable interface to store themselves may specify a URL from which the class capable of dereferencing a them may be loaded. If (as is usually the case) the c3p0 libraries will be locally available to the JNDI service, leave this set as null.Does Not Support Per-User Overrides.
- forceIgnoreUnresolvedTransactions
-
Default: falseStrongly disrecommended. Setting this to true may lead to subtle and bizarre bugs. This is a terrible setting, leave it alone unless absolutely necessary. It is here to workaround broken databases / JDBC drivers that do not properly support transactions, but that allow Connections' autoCommit flags to go to false regardless. If you are using a database that supports transactions "partially" (this is oxymoronic, as the whole point of transactions is to perform operations reliably and completely, but nonetheless such databases are out there), if you feel comfortable ignoring the fact that Connections with autoCommit == false may be in the middle of transactions and may hold locks and other resources, you may turn off c3p0's wise default behavior, which is to protect itself, as well as the usability and consistency of the database, by either rolling back (default) or committing (see c3p0.autoCommitOnClose above) unresolved transactions. This should only be set to true when you are sure you are using a database that allows Connections' autoCommit flag to go to false, but offers no other meaningful support of transactions. Otherwise setting this to true is just a bad idea. [See "Configuring Unresolved Transaction Handling"]
- idleConnectionTestPeriod
-
Default: 0If this is a number greater than 0, c3p0 will test all idle, pooled but unchecked-out connections, every this number of seconds. [See "Configuring Connection Testing"]
- initialPoolSize
-
Default: 3Number of Connections a pool will try to acquire upon startup. Should be between minPoolSize and maxPoolSize. [See "Basic Pool Configuration"]
- maxAdministrativeTaskTime
-
Default: 0Seconds before c3p0's thread pool will try to interrupt an apparently hung task. Rarely useful. Many of c3p0's functions are not performed by client threads, but asynchronously by an internal thread pool. c3p0's asynchrony enhances client performance directly, and minimizes the length of time that critical locks are held by ensuring that slow jdbc operations are performed in non-lock-holding threads. If, however, some of these tasks "hang", that is they neither succeed nor fail with an Exception for a prolonged period of time, c3p0's thread pool can become exhausted and administrative tasks backed up. If the tasks are simply slow, the best way to resolve the problem is to increase the number of threads, via numHelperThreads. But if tasks sometimes hang indefinitely, you can use this parameter to force a call to the task thread's interrupt() method if a task exceeds a set time limit. [c3p0 will eventually recover from hung tasks anyway by signalling an "APPARENT DEADLOCK" (you'll see it as a warning in the logs), replacing the thread pool task threads, and interrupt()ing the original threads. But letting the pool go into APPARENT DEADLOCK and then recover means that for some periods, c3p0's performance will be impaired. So if you're seeing these messages, increasing numHelperThreads and setting maxAdministrativeTaskTime might help. maxAdministrativeTaskTime should be large enough that any resonable attempt to acquire a Connection from the database, to test a Connection, or two destroy a Connection, would be expected to succeed or fail within the time set. Zero (the default) means tasks are never interrupted, which is the best and safest policy under most circumstances. If tasks are just slow, allocate more threads. If tasks are hanging forever, try to figure out why, and maybe setting maxAdministrativeTaskTime can help in the meantime.Does Not Support Per-User Overrides.
- maxConnectionAge
-
Default: 0Seconds, effectively a time to live. A Connection older than maxConnectionAge will be destroyed and purged from the pool. This differs from maxIdleTime in that it refers to absolute age. Even a Connection which has not been much idle will be purged from the pool if it exceeds maxConnectionAge. Zero means no maximum absolute age is enforced.
- maxIdleTime
-
Default: 0Seconds a Connection can remain pooled but unused before being discarded. Zero means idle connections never expire. [See "Basic Pool Configuration"]
- maxIdleTimeExcessConnections
-
Default: 0Number of seconds that Connections in excess of minPoolSize should be permitted to remain idle in the pool before being culled. Intended for applications that wish to aggressively minimize the number of open Connections, shrinking the pool back towards minPoolSize if, following a spike, the load level diminishes and Connections acquired are no longer needed. If maxIdleTime is set, maxIdleTimeExcessConnections should be smaller if the parameter is to have any effect. Zero means no enforcement, excess Connections are not idled out.
- maxPoolSize
-
Default: 15Maximum number of Connections a pool will maintain at any given time. [See "Basic Pool Configuration"]
- maxStatements
-
Default: 0The size of c3p0's global PreparedStatement cache. If both maxStatements and maxStatementsPerConnection are zero, statement caching will not be enabled. If maxStatements is zero butmaxStatementsPerConnection is a non-zero value, statement caching will be enabled, but no global limit will be enforced, only the per-connection maximum. maxStatements controls the total number of Statements cached, for all Connections. If set, it should be a fairly large number, as each pooled Connection requires its own, distinct flock of cached statements. As a guide, consider how many distinct PreparedStatements are used frequently in your application, and multiply that number by maxPoolSize to arrive at an appropriate value. Though maxStatements is the JDBC standard parameter for controlling statement caching, users may find c3p0's alternative maxStatementsPerConnection more intuitive to use. [See "Configuring Statement Pooling"]
- maxStatementsPerConnection
-
Default: 0The number of PreparedStatements c3p0 will cache for a single pooled Connection. If both maxStatements and maxStatementsPerConnection are zero, statement caching will not be enabled. IfmaxStatementsPerConnection is zero but maxStatements is a non-zero value, statement caching will be enabled, and a global limit enforced, but otherwise no limit will be set on the number of cached statements for a single Connection. If set, maxStatementsPerConnection should be set to about the number distinct PreparedStatements that are used frequently in your application, plus two or three extra so infrequently statements don't force the more common cached statements to be culled. Though maxStatements is the JDBC standard parameter for controlling statement caching, users may find maxStatementsPerConnection more intuitive to use. [See "Configuring Statement Pooling"]
- minPoolSize
-
Default: 3Minimum number of Connections a pool will maintain at any given time. [See "Basic Pool Configuration"]
- numHelperThreads
-
Default: 3c3p0 is very asynchronous. Slow JDBC operations are generally performed by helper threads that don't hold contended locks. Spreading these operations over multiple threads can significantly improve performance by allowing multiple operations to be performed simultaneously.Does Not Support Per-User Overrides.
- overrideDefaultUser
-
Default: nullForces the username that should by PooledDataSources when a user calls the default getConnection() method. This is primarily useful when applications are pooling Connections from a non-c3p0 unpooled DataSource. Applications that use ComboPooledDataSource, or that wrap any c3p0-implemented unpooled DataSource can use the simple user property.Does Not Support Per-User Overrides.
- overrideDefaultPassword
-
Default: nullForces the password that should by PooledDataSources when a user calls the default getConnection() method. This is primarily useful when applications are pooling Connections from a non-c3p0 unpooled DataSource. Applications that use ComboPooledDataSource, or that wrap any c3p0-implemented unpooled DataSource can use the simple password property.Does Not Support Per-User Overrides.
- password
-
Default: nullFor applications using ComboPooledDataSource or any c3p0-implemented unpooled DataSources — DriverManagerDataSource or the DataSource returned by DataSources.unpooledDataSource( ... ) — defines the password that will be used for the DataSource's default getConnection() method. (See also user.)Does Not Support Per-User Overrides.
- preferredTestQuery
-
Default: nullDefines the query that will be executed for all connection tests, if the default ConnectionTester (or some other implementation of QueryConnectionTester, or better yet FullQueryConnectionTester) is being used. Defining a preferredTestQuery that will execute quickly in your database may dramatically speed up Connection tests. (If no preferredTestQuery is set, the default ConnectionTester executes a getTables() call on the Connection's DatabaseMetaData. Depending on your database, this may execute more slowly than a "normal" database query.) NOTE: The table against which your preferredTestQuery will be run must exist in the database schema prior to your initialization of your DataSource. If your application defines its own schema, tryautomaticTestTable instead. [See "Configuring Connection Testing"]
- propertyCycle
-
Default: 0Maximum time in seconds before user configuration constraints are enforced. Determines how frequently maxConnectionAge, maxIdleTime, maxIdleTimeExcessConnections, unreturnedConnectionTimeoutare enforced. c3p0 periodically checks the age of Connections to see whether they've timed out. This parameter determines the period. Zero means automatic: A suitable period will be determined by c3p0. [You can call getEffectivePropertyCycle...() methods on a c3p0 PooledDataSource to find the period automatically chosen.]
- testConnectionOnCheckin
-
Default: falseIf true, an operation will be performed asynchronously at every connection checkin to verify that the connection is valid. Use in combination with idleConnectionTestPeriod for quite reliable, always asynchronous Connection testing. Also, setting an automaticTestTable or preferredTestQuery will usually speed up all connection tests. [See "Configuring Connection Testing"]
- testConnectionOnCheckout
-
Default: falseUse only if necessary. Expensive. If true, an operation will be performed at every connection checkout to verify that the connection is valid. Better choice: verify connections periodically usingidleConnectionTestPeriod. Also, setting an automaticTestTable or preferredTestQuery will usually speed up all connection tests. [See "Configuring Connection Testing"]
- unreturnedConnectionTimeout
-
Default: 0Seconds. If set, if an application checks out but then fails to check-in [i.e. close()] a Connection within the specified period of time, the pool will unceremoniously destroy() the Connection. This permits applications with occasional Connection leaks to survive, rather than eventually exhausting the Connection pool. And that's a shame. Zero means no timeout, applications are expected to close() their own Connections. Obviously, if a non-zero value is set, it should be to a value longer than any Connection should reasonably be checked-out. Otherwise, the pool will occasionally kill Connections in active use, which is bad. This is basically a bad idea, but it's a commonly requested feature. Fix your $%!@% applications so they don't leak Connections! Use this temporarily in combination with debugUnreturnedConnectionStackTraces to figure out where Connections are being checked-out that don't make it back into the pool!
- user
-
Default: nullFor applications using ComboPooledDataSource or any c3p0-implemented unpooled DataSources — DriverManagerDataSource or the DataSource returned by DataSources.unpooledDataSource() — defines the username that will be used for the DataSource's default getConnection() method. (See also password.)Does Not Support Per-User Overrides.
- usesTraditionalReflectiveProxies
-
Default: falsec3p0 originally used reflective dynamic proxies for implementations of Connections and other JDBC interfaces. As of c3p0-0.8.5, non-reflective, code-generated implementations are used instead. As this was a major change, and the old codebase had been extensively used and tested, this parameter was added to allow users to revert of they had problems. The new, non-reflexive implementation is faster, and has now been widely deployed and tested, so it is unlikely that this parameter will be useful. Both the old reflective and newer non-reflective codebases are being maintained, but support for the older codebase may (or may not) be dropped in the future.
一个task应用数据库连接配置的例子：
<bean id="dataSource" class="org.springframework.beans.factory.config.MethodInvokingFactoryBean">
<property name="staticMethod">
<value>com.mchange.v2.c3p0.DataSources.pooledDataSource</value>
</property>
<property name="arguments">
<list>
<ref local="olpsUnpooledDataSource"/>
<props>
<prop key="acquireIncrement">1</prop>
<prop key="initialPoolSize">1</prop>
<prop key="minPoolSize">1</prop>
<prop key="maxPoolSize">5</prop>
<prop key="maxIdleTime">1800</prop>
<prop key="maxIdleTimeExcessConnections">1000</prop> <!-- 自动收缩连接用的,单位秒-->
<!-- 自动重连需要的三个参数 -->
<prop key="acquireRetryAttempts">30</prop>
<prop key="acquireRetryDelay">1000</prop>
<prop key="breakAfterAcquireFailure">false</prop>
<!-- 获取一个connection需要的时间，单位毫秒 -->
<prop key="checkoutTimeout">500</prop>
</props>
</list>
</property>
</bean>
<bean id="olpsUnpooledDataSource" class="com.mchange.v2.c3p0.DriverManagerDataSource">
<property name="driverClass">
<value>com.alibaba.china.jdbc.SimpleDriver</value>
</property>
<property name="jdbcUrl">
<value>${database.driver.url}</value>
</property>
<property name="properties">
<bean class="com.alibaba.china.biz.common.security.SecureIdentityLoginModule">
<property name="user"><value>${username}</value></property>
<property name="password"><value>${password}</value></property>
<property name="bigStringTryClob"><value>true</value></property>
<property name="clientEncoding"><value>GBK</value></property>
<property name="serverEncoding"><value>ISO-8859-1</value></property>
</bean>
</property>
</bean>