网络存储系统NSS基准性能测试(7.17)

传送门 ☞ Android兵器谱 ☞ 转载请注明 ☞ http://blog.csdn.net/leverage_1229

一、实验参数列表

二、MATLAB脚本（balanced job bounds.m）

clear;
 
% input
N = input('Simultaneous browser connections N = ');                           
 
%initializtion
%Interarrival Times in Seconds
z1 = 30.0;
z2 = 96.1;
z3 = 246.7;
z4 = 735.7;
 
%Average * Time in Seconds
t1 = 0.007229;
t2 = 0.00036;
t3 = 0.0000618;
t4 = 0.2070;
t5 = 0.6776;
t6 = 0.506;
t7 = 0.005294;
t8 = 79.6;
t9 = 118.8;
 
%File Size in MB
fs1 = 1.2;
fs2 = 19.6;
fs3 = 78.9;
fs4 = 220.6;
 
%Block Size in MB
bs1 = 0.016;
bs2 = 0.015;
 
p1 = 0;
p2 = 1;
p3 = 0;
p4 = 0;
p5 = 0.8;
 
STR = 15;
 
%Average Seek in Seconds
seek1 = 0.016;
seek2 = 0.012;
seek3 = 0.012;
seek4 = 0.0115;
 
%Average Latency in Seconds
latency1 = 0.00833;
latency2 = 0.00687;
latency3 = 0.00687;
latency4 = 0.00555;
 
%Average Number of Seeks per Class
n1 = 6;
n2 = 11;
n3 = 26;
n4 = 60;
 
%Transfer Rate in MB/s
trate1 = 6.00;
trate2 = 4.67;
trate3 = 9.34;
trate4 = 9.34;
 
% response time of BJB
D(1) = t1+t2+t3*(fs4/bs1)+t4+t5+(1-p1)*(t6+t7*(fs4/bs2));
D(2) = p1*(1/STR)*((seek1+latency1)*n1+(bs1/trate1)*(fs4/bs1));
D(3) = (5/2)*(seek1+latency1+bs1/trate1)*(1-p3)+(1/2)*(seek1+latency1+bs1/trate1)*(1-p1)*(1-p4)+(1/3)*(seek1+latency1+bs1/trate1)*(1-p1)*(1-p4);
D(4) = (1-p1)*(1/4)*p5*t8+(1-p1)*(1-p5)*t9;
Dmax = max(D(1:4));                                         
Dsum = D(1)+D(2)+D(3)+D(4);                    
Davg = Dsum/4;                                  
for n = 1:N
    Rmin(n) = max(n*Dmax-z1, Dsum+((n-1)*Davg*Dsum/(Dsum+z1))); % lower bound of response time 
    Rmax(n) = Dsum+((n-1)*Dmax*(n-1)*Dsum/(((n-1)*Dsum)+z1));   % upper bound of response time    
end
 
% response time of MVA
for m = 1:4
    L(m) = 0;                    
end    
for n = 1:N
    R(1) = D(1);
    for m = 1:4
        R(m) = D(m) * (1 + L(m));
    end
    Tau = n / sum(R(:));
    for m = 1:4
        L(m) = Tau * R(m);          
    end
    
    Rn(n,1) = D(1);
    for m = 1:4
        Ln(n,m) = L(m);
        Rn(n,m) = R(m);
    end
    Taun(n) = Tau;
end
    
for n = 1:N    
    RTn(n) = sum(Rn(n,1:4));      % average response time    
end
 
t = 1:N;
 
% response time 
figure(1), plot(t, Rmin, 'g', t, RTn, 'r', t, Rmax, 'b'),xlabel('Simultaneous browser connections'),ylabel('Response time(s)');

三、NSS（网络存储系统）边界性能