w3af的安装（附pysvn的安装）

1：安装python，一般redhl自带，无需安装。

2：安装w3af

cd w3af/extlib/fpconst-0.7.2
python setup.py install
cd SOAPpy
python setup.py install
cd pyPdf
python setup.py install

3：nltk pyOpenSSL lxml pysvn scapy 的安装：

     

       一） wget http://pyyaml.org/download/pyyaml/PyYAML-3.09.tar.gz
        tar -xzvf PyYAML-3.09.tar.gz
        cd PyYAML-3.09
        python setup.py install
        cd ..
       二）wget http://nltk.googlecode.com/files/nltk-2.0b9.tar.gz
        tar -xzvf nltk-2.0b9.tar.gz
        cd nltk-2.0b9
        python setup.py install

       三)  yum install pyOpenSSL

       四） yum install python-lxml

       五） 如下：

I have Python 2.6.6 installed on RHEL 6, and when I tried to install pysvn-1.7.6, I got an error. What should I do?

 /search/python/pysvn-1.7.6/Import/pycxx-6.2.4/CXX/Python2/Objects.hxx:2912: warning: deprecated conversion from string constant to 'char*'  Compile: pysvn_svnenv.cpp into pysvn_svnenv.o  Compile: pysvn_profile.cpp into pysvn_profile.o  Compile: /search/python/pysvn-1.7.6/Import/pycxx-6.2.4/Src/cxxsupport.cxx into cxxsupport.o  Compile: /search/python/pysvn-1.7.6/Import/pycxx-6.2.4/Src/cxx_extensions.cxx into cxx_extensions.o  Compile: /search/python/pysvn-1.7.6/Import/pycxx-6.2.4/Src/cxxextensions.c into cxxextensions.o  Compile: /search/python/pysvn-1.7.6/Import/pycxx-6.2.4/Src/IndirectPythonInterface.cxx into IndirectPythonInterface.o  Link pysvn/_pysvn_2_7.so  make: *** No rule to make target `egg'. Stop.  error: Not a URL, existing file, or requirement spec: 'dist/pysvn-1.7.6-py2.7-linux-x86_64.egg'

在pysvn的解压包下的INSTALL.html：

Building on unix and Mac OS X systems.

1. Install subversion. 
   When installing from packages you will need to install the devel packages as well. For example on Fedora/Redhat subversion-devel, apr-devel, apr-util-devel and their dependancies.
2. Get the pysvn source code
3. For Python 2 or Python 3 builds: tar xzf pycxx-6.2.4.tar.gz into extdir/Import if not using a source kit
4. cd Source
5. For Python 2.6 or earlier builds: backport the PySVN code using python setup.py backport
6. Create the Makefile using python setup.py configure
7. make
8. cd Tests
9. Test pysvn by running make

Install pysvn by copying the following from Extension/Source to python site-specific directory.

• mkdir python-libdir/site-packages/pysvn
• cp pysvn/__init__.py python-libdir/site-packages/pysvn
• cp pysvn/_pysvn*.so python-libdir/site-packages/pysvn

以上方法有的回帖说解决了，但是我的还是不成功，最后使用：

1： yum install epel-release-6-8.noarch.rpm

2:  yum install pysvn

 安装上了。

  六）下载pybloomfiltermmap.rpm的包安装 从 http://pypi.python.org/pypi/pybloomfiltermmap/0.2.0。（提示不存在用户mockbuild,使用useradd mockbuild即可）

  七）cd w3af , 然后 ./w3af_gui图像界面

     ./w3af_console 命令行界面,w3af>>>help查看。

  w3af即安装成功。

  

  

 在配置就绪后即刻启动

 图形界面基本无脑操作，就说控制台好了，键入命令target

 然后设置目标地址

 set target http://xxxxxxx

 键入back返回上层

 键入start开始启用

reference:http://www.freebuf.com/articles/5472.html