华硕WL-167G USB 无线网卡ARM移植 （3：编译:版本RT.1104）

编译（前面的步骤见：编译、配置: 版本RT.1036,由于前版本的bug，现特更新为官方最新版本）

1.   下载

网卡 华硕WL-167G、TP-LINK TL-WN321G

驱动 RT73_Linux_STA_Drv1.1.0.4

点我进入下载页面：

Ralink Part Number	Date	Version	Release Notes
RT5390PCIe	11/26/2010	2.4.0.2
RT3090PCIe	11/26/2010	2.4.0.2
RT8070/RT3070/RT3370 USB	08/31/2010	2.4.0.1
RT3572USB	09/15/2010	2.4.0.2
RT2860PCI/mPCI/CB/PCIe(RT2760/RT2790/RT2860/RT2890)	07/16/2010	2.4.0.0
RT3062PCI/mPCI/CB/PCIe(RT3060/RT3062/RT3562/RT3592)	11/26/2010	2.4.1.0
RT2860WebUI	09/18/2009	2.2.0.0
RT2870USB(RT2870/RT2770)	07/09/2010	2.4.0.1
RT2870WebUI	08/20/2009	2.2.0.0
RT2501USB(RT73:RT2571W/RT2573/RT2671)	08/17/2010	1.1.0.4

点我进入下载地址

 

查看Release Notes，和1.0.3.6 （编译，配置）相比，的改进/更新：

[V 1.1.0.4]

1.) Support Kernel 2.6.31

[V 1.1.0.3]

1.) Support kernel 2.6.29.

2.) Fix DHCP Tx using high data rate

*******************************************************************

[V 1.1.0.2]

1.) Support kernel 2.6.27.

*******************************************************************

[V 1.1.0.1]

1.) Modify for kernel 2.6.24 and up.

*******************************************************************

 

[V1.1.0.0]

1.) Use USB single write and new firmware to support USB single write.

2.) Support USB 1.1 and improve its throughput.

3.) Fix the bug: reboot AP,sta unload then load, excuting supplicant would

     crash.

4.) Fix the AdHoc problem with Connexant STA at A band.

5.) Fix the problem: can't link to Broadcom AP,when AP set auth:wpa2 cipher:aes

6.) Ap set 802.1x & Fragmentation set 256,station can't connect AP

7.) There are hidden AP in enviroment,sta connect to AP hardly.

 

[V1.0.5.0]

1.) Fix the bug about deciding which BSSID is higher in IBSS mode.

 

[V1.0.4.1]

1.) Support configuration by NetworkManager

2.) Support linux kernel version 2.6.21

*******************************************************************

 

[V1.0.4.0]

1.) Support big endian

2.) Support x64 platform

3.) Support ATE function

4.) Fix the rekey issue on WPA-Preshared

5.) Add A-band country region code #8(W53), #9(J52), #10

6.) Fix Long/Short Preamble setting

7.) Show mix mode in the results of site survey if any

8.) Driver sends disassociate event to WPA Supplicant when AP turns off

9.) Bug Fixed: compile failed on FC5 kernel more than 2.6.15

*******************************************************************

看到前面的主要BUG部分有修正。。。

 

在有了前天（编译和配置）的移植基础，下面的就是按部就班了：

 

此处（在编译中）已修正，直接跳过

根据自带说明文档，修改rtmp_def.h尾部如下： 00831: /* Revision History by mike to support ASUS device of rt73 */ / 00832: {USB_DEVICE(0x0B05,0x1723)}, /* ASUS WL-167G ASUS */ / 00833: {USB_DEVICE(0x0B05,0x1724)}, /* ASUS */ / 00834: {USB_DEVICE(0,0)}} /* end marker */ 00835: 00836: 00837: #endif // __RTMP_DEF_H__ 新加00832，00833行

 

当然跳过./Configure，编辑 Makefile.6，

 

root@zanget:modules# mv Makefile Makefile.bak root@zanget:modules# cp Makefile.6 Makefile

 

 

 

2.       修改

A.        将开头部分修改成：

#PLATFORM=PC

#PLATFORM=CMPC

## Revision History by mike

PLATFORM=ARM

## Revision History end

 

B.   内核树目录

ifeq ($(PLATFORM),PC)

LINUX_SRC =/lib/modules/$(shell uname -r)/build

endif

ifeq ($(PLATFORM),CMPC)

LINUX_SRC = /home/fonchi/vendor/kernel-default-2.6.21/linux-2.6.21

endif

## Revision History by mike

ifeq ($(PLATFORM),ARM)

LINUX_SRC = /opt/s3c-2416/linux-2.6.21

Endif

## Revision History end

 

C.         然后是NDDIR部分

## Revision History by mike

##Configuration files on ARM busybox

ifeq ($(PLATFORM),ARM)

BASE_DIR := /opt/s3c-2416/rootfs/custom

NDDIR = $(BASE_DIR)/etc/sysconfig/network

MOD_CONF = $(BASE_DIR)/etc/modprobe.d/module-renames

ND_CONF = $(BASE_DIR)/etc/sysconfig/network/ifcfg-rausb0

else

## Revision History end

ND_CONF=/etc/sysconfig/network-scripts/ifcfg-rausb0

endif

 

D.        然后是install部分

install:

make -C $(LINUX_SRC) /

 

 

 

3.       编译

root@zanget:modules# make root@zanget:rt73# make make -C /opt/s3c-2416/linux-2.6.21 SUBDIRS=/opt/s3c-2416/wireless-usb/driver/RT.1104/Module modules make[1]: 正在进入目录 `/opt/s3c-2416/linux-2.6.21'   CC [M]  /opt/s3c-2416/wireless-usb/driver/RT.1104/Module/rtmp_main.o   CC [M]  /opt/s3c-2416/wireless-usb/driver/RT.1104/Module/mlme.o /opt/s3c-2416/wireless-usb/driver/RT.1104/Module/mlme.c: In function 'STAMlmePeriodicExec': /opt/s3c-2416/wireless-usb/driver/RT.1104/Module/mlme.c:860: warning: unused variable 'RxSignal' /opt/s3c-2416/wireless-usb/driver/RT.1104/Module/mlme.c: In function 'AsicSwitchChannel': /opt/s3c-2416/wireless-usb/driver/RT.1104/Module/mlme.c:3932: warning: comparison is always false due to limited range of data type /opt/s3c-2416/wireless-usb/driver/RT.1104/Module/mlme.c:3938: warning: comparison is always true due to limited range of data type /opt/s3c-2416/wireless-usb/driver/RT.1104/Module/mlme.c:3990: warning: comparison is always false due to limited range of data type /opt/s3c-2416/wireless-usb/driver/RT.1104/Module/mlme.c: In function 'AsicAdjustTxPower': /opt/s3c-2416/wireless-usb/driver/RT.1104/Module/mlme.c:4574: warning: comparison is always false due to limited range of data type   CC [M]  /opt/s3c-2416/wireless-usb/driver/RT.1104/Module/connect.o   CC [M]  /opt/s3c-2416/wireless-usb/driver/RT.1104/Module/rtusb_bulk.o /opt/s3c-2416/wireless-usb/driver/RT.1104/Module/rtusb_bulk.c: In function 'RTUSBInitRxDesc': /opt/s3c-2416/wireless-usb/driver/RT.1104/Module/rtusb_bulk.c:550: warning: passing argument 6 of 'RTusb_fill_bulk_urb' from incompatible pointer type /opt/s3c-2416/wireless-usb/driver/RT.1104/Module/rtusb_bulk.c: In function 'RTUSBBulkOutDataPacket': /opt/s3c-2416/wireless-usb/driver/RT.1104/Module/rtusb_bulk.c:649: warning: passing argument 4 of 'RTUSBInitTxDesc' from incompatible pointer type /opt/s3c-2416/wireless-usb/driver/RT.1104/Module/rtusb_bulk.c: In function 'RTUSBBulkOutNullFrame': /opt/s3c-2416/wireless-usb/driver/RT.1104/Module/rtusb_bulk.c:705: warning: passing argument 4 of 'RTUSBInitTxDesc' from incompatible pointer type /opt/s3c-2416/wireless-usb/driver/RT.1104/Module/rtusb_bulk.c: In function 'RTUSBBulkOutRTSFrame': /opt/s3c-2416/wireless-usb/driver/RT.1104/Module/rtusb_bulk.c:769: warning: passing argument 4 of 'RTUSBInitTxDesc' from incompatible pointer type /opt/s3c-2416/wireless-usb/driver/RT.1104/Module/rtusb_bulk.c: In function 'RTUSBBulkOutMLMEPacket': /opt/s3c-2416/wireless-usb/driver/RT.1104/Module/rtusb_bulk.c:830: warning: passing argument 4 of 'RTUSBInitTxDesc' from incompatible pointer type /opt/s3c-2416/wireless-usb/driver/RT.1104/Module/rtusb_bulk.c: In function 'RTUSBBulkOutPsPoll': /opt/s3c-2416/wireless-usb/driver/RT.1104/Module/rtusb_bulk.c:882: warning: passing argument 4 of 'RTUSBInitTxDesc' from incompatible pointer type   CC [M]  /opt/s3c-2416/wireless-usb/driver/RT.1104/Module/rtusb_io.o   CC [M]  /opt/s3c-2416/wireless-usb/driver/RT.1104/Module/sync.o   CC [M]  /opt/s3c-2416/wireless-usb/driver/RT.1104/Module/assoc.o /opt/s3c-2416/wireless-usb/driver/RT.1104/Module/assoc.c: In function 'link_status_handler': /opt/s3c-2416/wireless-usb/driver/RT.1104/Module/assoc.c:749: warning: embedded '/0' in format /opt/s3c-2416/wireless-usb/driver/RT.1104/Module/assoc.c:773: warning: embedded '/0' in format   CC [M]  /opt/s3c-2416/wireless-usb/driver/RT.1104/Module/auth.o   CC [M]  /opt/s3c-2416/wireless-usb/driver/RT.1104/Module/auth_rsp.o   CC [M]  /opt/s3c-2416/wireless-usb/driver/RT.1104/Module/rtusb_data.o /opt/s3c-2416/wireless-usb/driver/RT.1104/Module/rtusb_data.c: In function 'RTUSBRxPacket': /opt/s3c-2416/wireless-usb/driver/RT.1104/Module/rtusb_data.c:2233: warning: ISO C90 forbids mixed declarations and code /opt/s3c-2416/wireless-usb/driver/RT.1104/Module/rtusb_data.c:2271: warning: ISO C90 forbids mixed declarations and code   CC [M]  /opt/s3c-2416/wireless-usb/driver/RT.1104/Module/rtmp_init.o /opt/s3c-2416/wireless-usb/driver/RT.1104/Module/rtmp_init.c: In function 'NICReadEEPROMParameters': /opt/s3c-2416/wireless-usb/driver/RT.1104/Module/rtmp_init.c:1188: warning: comparison is always false due to limited range of data type /opt/s3c-2416/wireless-usb/driver/RT.1104/Module/rtmp_init.c:1201: warning: comparison is always false due to limited range of data type /opt/s3c-2416/wireless-usb/driver/RT.1104/Module/rtmp_init.c:1218: warning: comparison is always false due to limited range of data type /opt/s3c-2416/wireless-usb/driver/RT.1104/Module/rtmp_init.c:1318: warning: comparison is always false due to limited range of data type /opt/s3c-2416/wireless-usb/driver/RT.1104/Module/rtmp_init.c:1322: warning: comparison is always false due to limited range of data type /opt/s3c-2416/wireless-usb/driver/RT.1104/Module/rtmp_init.c:1330: warning: comparison is always false due to limited range of data type /opt/s3c-2416/wireless-usb/driver/RT.1104/Module/rtmp_init.c:1334: warning: comparison is always false due to limited range of data type /opt/s3c-2416/wireless-usb/driver/RT.1104/Module/rtmp_init.c: In function 'RTMPCckBbpTuning': /opt/s3c-2416/wireless-usb/driver/RT.1104/Module/rtmp_init.c:3558: warning: comparison is always true due to limited range of data type   CC [M]  /opt/s3c-2416/wireless-usb/driver/RT.1104/Module/sanity.o   CC [M]  /opt/s3c-2416/wireless-usb/driver/RT.1104/Module/rtmp_wep.o   CC [M]  /opt/s3c-2416/wireless-usb/driver/RT.1104/Module/rtmp_info.o   CC [M]  /opt/s3c-2416/wireless-usb/driver/RT.1104/Module/rtmp_tkip.o   CC [M]  /opt/s3c-2416/wireless-usb/driver/RT.1104/Module/wpa.o   CC [M]  /opt/s3c-2416/wireless-usb/driver/RT.1104/Module/md5.o   CC [M]  /opt/s3c-2416/wireless-usb/driver/RT.1104/Module/netif_block.o   LD [M]  /opt/s3c-2416/wireless-usb/driver/RT.1104/Module/rt73.o   Building modules, stage 2.   MODPOST 1 modules   CC      /opt/s3c-2416/wireless-usb/driver/RT.1104/Module/rt73.mod.o   LD [M]  /opt/s3c-2416/wireless-usb/driver/RT.1104/Module/rt73.ko

 

 

经过多次版本修正，官方驱动这次一下就成功了！

最后重新网卡驱动

 

 

 

4.       附加：

 

下面的部分上次(点我：编译)已经添加，下面只做标记

 

WARNING: "wireless_send_event" [/opt/s3c-2416/usb-wireless/linux/rt73_Linux_STA_Drv1.0.3.6/modules/rt73.ko] undefined!   CC      /opt/s3c-2416/usb-wireless/linux/rt73_Linux_STA_Drv1.0.3.6/modules/rt73.mod.o   LD [M]  /opt/s3c-2416/usb-wireless/linux/rt73_Linux_STA_Drv1.0.3.6/modules/rt73.ko make[1]:正在离开目录 `/opt/s3c-2416/linux-2.6.21'   当然还要解决这个问题： WARNING: "wireless_send_event" [/opt/s3c-2416/usb-wireless/linux/rt73_Linux_STA_Drv1.0.3.6/modules/rt73.ko] undefined!   参看http://blog.chinaunix.net/u1/34190/showart_289626.html   内核里添加了对无线的支持，进入内核目录，运行 root@zanget:linux-2.6.21#make menuconfig 选择 【device driver】→【Network device support】→【Wireless LAN (non-hamradio)】→【Wireless LAN drivers (non-hamradio) & Wireless Extensions】

 

 

配置见下一篇文章