Linear Layout 布局技巧

技巧：要创建一个每个子View在屏幕上都有相同空间的线性布局，对于垂直布局，要把每个子View的android:layout_height属性值都设置为”0dp”，对于与水平布局，要把每个子View的android:layout_width的属性值都设置为”0dp”。然后把每个子View的android:layout_weight属性值都设置为”1”。

Layout Weight

Equally weighted children

To create a linear layout in which each child uses the same amount of space on the screen, set theandroid:layout_height of each view to "0dp" (for a vertical layout) or the android:layout_width of each view to "0dp" (for a horizontal layout). Then set theandroid:layout_weight of each view to "1".

LinearLayout also supports assigning a weight to individual children with the android:layout_weight attribute. This attribute assigns an "importance" value to a view in terms of how much space is should occupy on the screen. A larger weight value allows it to expand to fill any remaining space in the parent view. Child views can specify a weight value, and then any remaining space in the view group is assigned to children in the proportion of their declared weight. Default weight is zero.

For example, if there are three text fields and two of them declare a weight of 1, while the other is given no weight, the third text field without weight will not grow and will only occupy the area required by its content. The other two will expand equally to fill the space remaining after all three fields are measured. If the third field is then given a weight of 2 (instead of 0), then it is now declared more important than both the others, so it gets half the total remaining space, while the first two share the rest equally.

android:layout_gravity

Standard gravity constant that a child supplies to its parent. Defines how the child view should be positioned, on both the X and Y axes, within its enclosing layout.

Must be one or more (separated by '|') of the following constant values.

Constant	Value	Description
top	0x30	Push object to the top of its container, not changing its size.
bottom	0x50	Push object to the bottom of its container, not changing its size.
left	0x03	Push object to the left of its container, not changing its size.
right	0x05	Push object to the right of its container, not changing its size.
center_vertical	0x10	Place object in the vertical center of its container, not changing its size.
fill_vertical	0x70	Grow the vertical size of the object if needed so it completely fills its container.
center_horizontal	0x01	Place object in the horizontal center of its container, not changing its size.
fill_horizontal	0x07	Grow the horizontal size of the object if needed so it completely fills its container.
center	0x11	Place the object in the center of its container in both the vertical and horizontal axis, not changing its size.
fill	0x77	Grow the horizontal and vertical size of the object if needed so it completely fills its container.
clip_vertical	0x80	Additional option that can be set to have the top and/or bottom edges of the child clipped to its container's bounds. The clip will be based on the vertical gravity: a top gravity will clip the bottom edge, a bottom gravity will clip the top edge, and neither will clip both edges.
clip_horizontal	0x08	Additional option that can be set to have the left and/or right edges of the child clipped to its container's bounds. The clip will be based on the horizontal gravity: a left gravity will clip the right edge, a right gravity will clip the left edge, and neither will clip both edges.
start	0x00800003	Push object to the beginning of its container, not changing its size.
end	0x00800005	Push object to the end of its container, not changing its size.

This corresponds to the global attribute resource symbol layout_gravity.