centos7 安装telent-server

linux系统出于安全考虑，默认情况下采用的是SSH服务，而不是telnet服务，可是有些时候会使用telnet来管理主机，这里介绍一下在Linux系统下如何安装和设置telnet服务
1.yum进行安装
[root@localhost ~]# yum install telnet-server
依赖
Dependencies Resolved
================================================================================
Package               Arch           Version                Repository    Size
================================================================================
Installing:
telnet-server         x86_64         1:0.17-59.el7          base          40 k

Transaction Summary
================================================================================
Install  1 Package
安装成功
Is this ok [y/d/N]: y
Downloading packages:
telnet-server-0.17-59.el7.x86_64.rpm                       |  40 kB   00:00    
Running transaction check
Running transaction test
Transaction test succeeded
Running transaction
  Installing : 1:telnet-server-0.17-59.el7.x86_64                           1/1
  Verifying  : 1:telnet-server-0.17-59.el7.x86_64                           1/1

Installed:
  telnet-server.x86_64 1:0.17-59.el7                                           
Complete!
2.rpm -ql查看telent-server安装的位置
[root@localhost sysconfig]# rpm -ql telnet-server-0.17-59.el7.x86_64
[root@localhost ~]# rpm -ql telnet-server-0.17-59.el7.x86_64
/usr/lib/systemd/system/telnet.socket
/usr/lib/systemd/system/[email protected]
/usr/sbin/in.telnetd
/usr/share/man/man5/issue.net.5.gz
/usr/share/man/man8/in.telnetd.8.gz
/usr/share/man/man8/telnetd.8.gz
3.安装xinetd
[root@localhost xinetd.d]# yum install xinetd
依赖
Dependencies Resolved
================================================================================
Package         Arch            Version                    Repository     Size
================================================================================
Installing:
xinetd          x86_64          2:2.3.15-12.el7            base          128 k

Transaction Summary
================================================================================
Install  1 Package
安装成功
Is this ok [y/d/N]: y
Downloading packages:
xinetd-2.3.15-12.el7.x86_64.rpm                            | 128 kB   00:00    
Running transaction check
Running transaction test
Transaction test succeeded
Running transaction
  Installing : 2:xinetd-2.3.15-12.el7.x86_64                                1/1
  Verifying  : 2:xinetd-2.3.15-12.el7.x86_64                                1/1

Installed:
  xinetd.x86_64 2:2.3.15-12.el7                                                
Complete!
4.rpm -ql查看xinetd安装的位置
[root@localhost xinetd.d]# rpm -ql xinetd.x86_64 2:2.3.15-12.el7
5.启动xinetd
[root@localhost xinetd.d]# service xinetd start
6.启动telent
[root@localhost xinetd.d]# systemctl start telnet.socket
7.netstat查看端口占用情况
[root@localhost xinetd.d]# netstat -ntlp
8.window验证

 

==========================网上的做法感觉更正确====================================

先检查CentOS7.0是否已经安装以下两个安装包:telnet-server、xinetd。命令如下：
    rpm -qa telnet-server
    rpm -qa xinetd
    如果没有安装，则先安装。安装命令：
[root@master ~]# yum list |grep telnet
telnet-server.x86_64                    1:0.17-59.el7                  @base   
telnet.x86_64                           1:0.17-59.el7                  base    
[root@master ~]# yum install telnet-server.x86_64
[root@master ~]# yum install telnet.x86_64
[root@master ~]# yum list |grep xinetd
xinetd.x86_64                           2:2.3.15-12.el7                @base 
[root@master ~]# yum install xinetd.x86_64
 
安装完成后，将xinetd服务加入开机自启动:
    systemctl enable xinetd.service
将telnet服务加入开机自启动：
    systemctl enable telnet.socket
最后，启动以上两个服务即可：
    systemctl start telnet.socket
    systemctl start xinetd（或service xinetd start）
注意：systemctl用来代替service命令的