Android View体系（七）从源码解析View的measure流程
相关文章
Android View体系（一）视图坐标系
Android View体系（二）实现View滑动的六种方法
Android View体系（三）属性动画
Android View体系（四）从源码解析Scroller
Android View体系（五）从源码解析View的事件分发机制
Android View体系（六）从源码解析Activity的构成
前言
在上一篇我们了解了Activity的构成后，开始了解一下View的工作流程，就是measure、layout和draw。measure用来测量View的宽高，layout用来确定View的位置，draw则用来绘制View。这一讲我们来看看measure流程，measure流程分为View的measure流程和ViewGroup的measure流程，只不过ViewGroup的measure流程除了要完成自己的测量还要遍历去调用子元素的measure()方法。
1.View的measure流程
先来看看onMeasure()方法（View.java）：
protected void onMeasure(int widthMeasureSpec, int heightMeasureSpec) {
setMeasuredDimension(getDefaultSize(getSuggestedMinimumWidth(), widthMeasureSpec),
getDefaultSize(getSuggestedMinimumHeight(), heightMeasureSpec));
}看看setMeasuredDimension()方法：
protected final void setMeasuredDimension(int measuredWidth, int measuredHeight) {
boolean optical = isLayoutModeOptical(this);
if (optical != isLayoutModeOptical(mParent)) {
Insets insets = getOpticalInsets();
int opticalWidth = insets.left + insets.right;
int opticalHeight = insets.top + insets.bottom;
measuredWidth += optical ? opticalWidth : -opticalWidth;
measuredHeight += optical ? opticalHeight : -opticalHeight;
}
setMeasuredDimensionRaw(measuredWidth, measuredHeight);
}很显然是用来设置View的宽高的，先来看看getDefaultSize()方法处理了什么：
public static int getDefaultSize(int size, int measureSpec) {
int result = size;
int specMode = MeasureSpec.getMode(measureSpec);
int specSize = MeasureSpec.getSize(measureSpec);
switch (specMode) {
case MeasureSpec.UNSPECIFIED:
result = size;
break;
case MeasureSpec.AT_MOST:
case MeasureSpec.EXACTLY:
result = specSize;
break;
}
return result;
}specMode是View的测量模式，而specSize是View的测量大小，看到这里我们有必要先看看MeasureSpec类：
public static class MeasureSpec {
private static final int MODE_SHIFT = 30;
private static final int MODE_MASK = 0x3 << MODE_SHIFT;
/** * Measure specification mode: The parent has not imposed any constraint * on the child. It can be whatever size it wants. */
public static final int UNSPECIFIED = 0 << MODE_SHIFT;
/** * Measure specification mode: The parent has determined an exact size * for the child. The child is going to be given those bounds regardless * of how big it wants to be. */
public static final int EXACTLY = 1 << MODE_SHIFT;
/** * Measure specification mode: The child can be as large as it wants up * to the specified size. */
public static final int AT_MOST = 2 << MODE_SHIFT;
...省略
public static int getMode(int measureSpec) {
return (measureSpec & MODE_MASK);
}
public static int getSize(int measureSpec) {
return (measureSpec & ~MODE_MASK);
}
...省略
}MeasureSpec类帮助我们来测量View，它是一个32位的int值，高两位为specMode （测量的模式），低30位为specSize （测量的大小），测量模式分为三种：
- UNSPECIFIED：未指定模式，View想多大就多大，父容器不做限制，一般用于系统内部的测量。
- AT_MOST：最大模式，对应于wrap_comtent属性，只要尺寸不超过父控件允许的最大尺寸就行。
- EXACTLY：精确模式，对应于match_parent属性和具体的数值，父容器测量出View所需要的大小，也就是specSize的值。
让我们回头看看getDefaultSize()方法，很显然在AT_MOST和EXACTLY模式下，都返回specSize这个值，也就是View测量后的大小，而在UNSPECIFIED模式返回的是getDefaultSize()方法的第一次个参数的值，这第一个参数从onMeasure()方法来看是getSuggestedMinimumWidth()方法和getSuggestedMinimumHeight()得到的，那我们来看看getSuggestedMinimumWidth()方法做了什么，我们只需要弄懂getSuggestedMinimumWidth()方法，因为这两个方法原理是一样的：
protected int getSuggestedMinimumWidth() {
return (mBackground == null) ? mMinWidth : max(mMinWidth, mBackground.getMinimumWidth());
}
如果View没有设置背景则取值为mMinWidth，mMinWidth是可以设置的，它对应于android:minWidth这个属性设置的值或者View的setMinimumWidth的值，如果不指定的话则默认为0：
public void setMinimumWidth(int minWidth) {
mMinWidth = minWidth;
requestLayout();
}如果View设置了背景在取值为max(mMinWidth, mBackground.getMinimumWidth())，取值mMinWidth和mBackground.getMinimumWidth()的最大值，上面我们说过了mMinWidth，那来看看mBackground.getMinimumWidth()，这个mBackground是Drawable类型的，看一下Drawable类的getMinimumWidth()方法（Drawable.java）：
public int getMinimumWidth() {
final int intrinsicWidth = getIntrinsicWidth();
return intrinsicWidth > 0 ? intrinsicWidth : 0;
}intrinsicWidth得到的是这个Drawable的固有的宽度，如果固有宽度大于0则返回固有宽度，否则返回0。
总结一下getSuggestedMinimumWidth()方法就是：如果View没有设置背景则返回mMinWidth ，如果设置了背景就返回mMinWidth 和Drawable最小宽度两个值的最大值。
2.ViewGroup的measure流程
ViewGroup的measure原理
讲完了View的measure流程，接下来看看ViewGroup的measure流程，对于ViewGroup，它不只要measure自己本身，还要遍历的调用子元素的measure()方法，ViewGroup中没有定义onMeasure()方法，但他定义了measureChildren()方法（ViewGroup.java）：
protected void measureChildren(int widthMeasureSpec, int heightMeasureSpec) {
final int size = mChildrenCount;
final View[] children = mChildren;
for (int i = 0; i < size; ++i) {
final View child = children[i];
if ((child.mViewFlags & VISIBILITY_MASK) != GONE) {
measureChild(child, widthMeasureSpec, heightMeasureSpec);
}
}
}就是遍历子元素并调用measureChild()方法：
protected void measureChild(View child, int parentWidthMeasureSpec,
int parentHeightMeasureSpec) {
final LayoutParams lp = child.getLayoutParams();
final int childWidthMeasureSpec = getChildMeasureSpec(parentWidthMeasureSpec,
mPaddingLeft + mPaddingRight, lp.width);
final int childHeightMeasureSpec = getChildMeasureSpec(parentHeightMeasureSpec,
mPaddingTop + mPaddingBottom, lp.height);
child.measure(childWidthMeasureSpec, childHeightMeasureSpec);
}调用child.getLayoutParams()方法来获得子元素的LayoutParams属性，并获取到子元素的MeasureSpec并调用子元素的measure()方法进行测量。getChildMeasureSpec()方法里写了什么呢？
public static int getChildMeasureSpec(int spec, int padding, int childDimension) {
int specMode = MeasureSpec.getMode(spec);
int specSize = MeasureSpec.getSize(spec);
int size = Math.max(0, specSize - padding);
int resultSize = 0;
int resultMode = 0;
switch (specMode) {
// Parent has imposed an exact size on us
case MeasureSpec.EXACTLY:
if (childDimension >= 0) {
resultSize = childDimension;
resultMode = MeasureSpec.EXACTLY;
} else if (childDimension == LayoutParams.MATCH_PARENT) {
// Child wants to be our size. So be it.
resultSize = size;
resultMode = MeasureSpec.EXACTLY;
} else if (childDimension == LayoutParams.WRAP_CONTENT) {
// Child wants to determine its own size. It can't be
// bigger than us.
resultSize = size;
resultMode = MeasureSpec.AT_MOST;
}
break;
// Parent has imposed a maximum size on us
case MeasureSpec.AT_MOST:
if (childDimension >= 0) {
// Child wants a specific size... so be it
resultSize = childDimension;
resultMode = MeasureSpec.EXACTLY;
} else if (childDimension == LayoutParams.MATCH_PARENT) {
// Child wants to be our size, but our size is not fixed.
// Constrain child to not be bigger than us.
resultSize = size;
resultMode = MeasureSpec.AT_MOST;
} else if (childDimension == LayoutParams.WRAP_CONTENT) {
// Child wants to determine its own size. It can't be
// bigger than us.
resultSize = size;
resultMode = MeasureSpec.AT_MOST;
}
break;
// Parent asked to see how big we want to be
case MeasureSpec.UNSPECIFIED:
if (childDimension >= 0) {
// Child wants a specific size... let him have it
resultSize = childDimension;
resultMode = MeasureSpec.EXACTLY;
} else if (childDimension == LayoutParams.MATCH_PARENT) {
// Child wants to be our size... find out how big it should
// be
resultSize = 0;
resultMode = MeasureSpec.UNSPECIFIED;
} else if (childDimension == LayoutParams.WRAP_CONTENT) {
// Child wants to determine its own size.... find out how
// big it should be
resultSize = 0;
resultMode = MeasureSpec.UNSPECIFIED;
}
break;
}
return MeasureSpec.makeMeasureSpec(resultSize, resultMode);
}很显然这是根据父容器的MeasureSpec的模式再结合子元素的LayoutParams属性来得出子元素的MeasureSpec属性，有一点需要注意的是如果父容器的MeasureSpec属性为AT_MOST，子元素的LayoutParams属性为WRAP_CONTENT，那根据代码我们会发现子元素的MeasureSpec属性也为AT_MOST，它的specSize值为父容器的specSize减去padding的值，也就是说跟这个子元素设置LayoutParams属性为MATCH_PARENT效果是一样的，为了解决这个问题需要在LayoutParams属性为WRAP_CONTENT时指定一下默认的宽和高。
LinearLayout的measure流程
ViewGroup并没有提供onMeasure()方法，而是让其子类来各自实现测量的方法，究其原因就是ViewGroup有不同的布局的需要很难统一，接下来我们来简单分析一下ViewGroup的子类LinearLayout的measure流程，先来看看它的onMeasure()方法（LinearLayout.java）：
@Override
protected void onMeasure(int widthMeasureSpec, int heightMeasureSpec) {
if (mOrientation == VERTICAL) {
measureVertical(widthMeasureSpec, heightMeasureSpec);
} else {
measureHorizontal(widthMeasureSpec, heightMeasureSpec);
}
}来看看垂直measureVertical()方法的部分源码：
void measureVertical(int widthMeasureSpec, int heightMeasureSpec) {
mTotalLength = 0;
mTotalLength = 0;
...省略
for (int i = 0; i < count; ++i) {
final View child = getVirtualChildAt(i);
if (child == null) {
mTotalLength += measureNullChild(i);
continue;
}
if (child.getVisibility() == View.GONE) {
i += getChildrenSkipCount(child, i);
continue;
}
if (hasDividerBeforeChildAt(i)) {
mTotalLength += mDividerHeight;
}
LinearLayout.LayoutParams lp = (LinearLayout.LayoutParams) child.getLayoutParams();
totalWeight += lp.weight;
if (heightMode == MeasureSpec.EXACTLY && lp.height == 0 && lp.weight > 0) {
// Optimization: don't bother measuring children who are going to use
// leftover space. These views will get measured again down below if
// there is any leftover space.
final int totalLength = mTotalLength;
mTotalLength = Math.max(totalLength, totalLength + lp.topMargin + lp.bottomMargin);
skippedMeasure = true;
} else {
int oldHeight = Integer.MIN_VALUE;
if (lp.height == 0 && lp.weight > 0) {
// heightMode is either UNSPECIFIED or AT_MOST, and this
// child wanted to stretch to fill available space.
// Translate that to WRAP_CONTENT so that it does not end up
// with a height of 0
oldHeight = 0;
lp.height = LayoutParams.WRAP_CONTENT;
}
// Determine how big this child would like to be. If this or
// previous children have given a weight, then we allow it to
// use all available space (and we will shrink things later
// if needed).
measureChildBeforeLayout(
child, i, widthMeasureSpec, 0, heightMeasureSpec,
totalWeight == 0 ? mTotalLength : 0);
if (oldHeight != Integer.MIN_VALUE) {
lp.height = oldHeight;
}
final int childHeight = child.getMeasuredHeight();
final int totalLength = mTotalLength;
mTotalLength = Math.max(totalLength, totalLength + childHeight + lp.topMargin +
lp.bottomMargin + getNextLocationOffset(child));
...省略
if (useLargestChild &&
(heightMode == MeasureSpec.AT_MOST || heightMode == MeasureSpec.UNSPECIFIED)) {
mTotalLength = 0;
for (int i = 0; i < count; ++i) {
final View child = getVirtualChildAt(i);
if (child == null) {
mTotalLength += measureNullChild(i);
continue;
}
if (child.getVisibility() == GONE) {
i += getChildrenSkipCount(child, i);
continue;
}
final LinearLayout.LayoutParams lp = (LinearLayout.LayoutParams)
child.getLayoutParams();
// Account for negative margins
final int totalLength = mTotalLength;
mTotalLength = Math.max(totalLength, totalLength + largestChildHeight +
lp.topMargin + lp.bottomMargin + getNextLocationOffset(child));
}
}
// Add in our padding
mTotalLength += mPaddingTop + mPaddingBottom;
int heightSize = mTotalLength;
// Check against our minimum height定义了mTotalLength用来存储LinearLayout在垂直方向的高度，然后遍历子元素，根据子元素的MeasureSpec模式分别计算每个子元素的高度，如果是wrap_content则将每个子元素的高度和margin垂直高度等值相加并赋值给mTotalLength得出整个LinearLayout的高度。如果布局高度设置为match_parent者具体数值则和View的测量方法一样。