tiny6410用usb-wifi命令行连wifi问题

最近要将tiny6410连上网，自己做的文件系统没有移植qtopia，所以用命令行上网，直接拷了友善的scan-wifi和start-wifi。stop-wifi来用，

刚开始scan-wifi可以搜到所有无线网络。

[root@FriendlyARM /]# scan-wifi 
cfg80211: Calling CRDA to update world regulatory domain
libertas_sdio: Libertas SDIO driver
libertas_sdio: Copyright Pierre Ossman
usbcore: registered new interface driver ath9k_htc
usbcore: registered new interface driver rt73usb
usb 1-1.3: reset full speed USB device using s3c2410-ohci and address 3
usbcore: registered new interface driver rt2800usb

rtw driver version=v3.0.1590.20110511
usbcore: registered new interface driver rtl8192cu
usbcore: registered new interface driver zd1211rw
         50% CMCC
         44% CMCC
         41% CMCC
         53% CMCC
         67% 
         50% 
         44% CMCC
        100% linux  (Security)
         76% ChinaNet
         76% GDUPT
         67% CMCC
         44% CMCC-EASY
         47% ChinaNet
         47% GDUPT
         44% ChinaNet
         44% ChinaNet
         47% GDUPT
         41% GDUPT
         73%  (Security)
19 Access Point Found

然后用start-wifi wpa "linux" "3B9133B913"  出状况了。我路由设的名字linux 密码设3B9133B913.安全设置选三种中的第一种。

[root@FriendlyARM /]# ifconfig eth0 down
[root@FriendlyARM /]# start-wifi wpa "linux" "3B9133B913"
udhcpc (v1.17.2) started
Sending discover...
Sending discover...
Sending discover...
Sending discover...
Sending discover...
Sending discover...
Sending discover...
Sending discover...
Sending discover...
Sending discover...
Sending discover...
Sending discover...
Sending discover...
Sending discover...
Sending discover...
Sending discover...
Sending discover...
Sending discover...
Sending discover...
Sending discover...
Sending discover...
Sending discover...

我先down 掉eth0。

然后再执行start-wifi wpa "linux" "3B9133B913"

结果就是一直Sending discover...失败。

换成友善提供的内核和文件系统也是如此。不过用图形界面连wifi是可以，这是什么问题？有人知道吗？

知道的请联系我。QQ772662623.

我也会继续找方法，有新进展一定发博客上来。