pure-ftpd的安装和使用
一,系统支持
系统中需要安装有 Mysql+Apache+Dns(可选).
二,准备软件
Ftpd Server :
pure-ftpd-1.0.20.tar.gz
pureftpd_php_manager:
pureftpd_php_manager.tar.gz
三,定制安装
1:解压缩
到下载的两个文件所在目录.
#cd download
#tar zxvf pure-ftpd-1.0.20.tar.gz
#tar zxvf pureftpd_php_manager.tar.gz
2:编译
#cd pure-ftpd-1.0.20
#./configure /
--prefix=/usr/local/pureftpd /
--with-mysql=/usr/local/mysql /
--with-paranoidmsg /
--with-shadow /
--with-welcomemsg /
--with-uploadscript /
--with-quotas /
--with-cookie /
--with-pam /
--with-virtualhosts /
--with-virtualroot /
--with-diraliases /
--with-sysquotas /
--with-ratios /
--with-ftpwho /
--with-throttling /
--with-language=simplified-chinese --------------->>Socket 会话显示出来的信息的语言.缺省为英语,simplified-chinese 简体中文,traditional-chinese BIG5繁体中文
--with-mysql=/usr/local/mysql / 此处的 /usr/local/mysql 请改为你的mysql实际安装路径.如果出现类似configure: error: Your MySQL client libraries aren't properly installed 的错误,请将mysql目录下的 include/mysql下的mysql.h文件以及lib/mysql下的全部文件,连接(直接复制过去或许也可)到 /usr/lib 目录下
3:安装
#make
#make check
#make install
#cp pureftpd-mysql.conf /usr/local/etc/
#cd configuration-file
#chmod u+x pure-config.pl
#cp pure-config.pl /usr/local/sbin/
#cp /usr/local/pureftpd/sbin/pure-ftpwho /usr/local/sbin/
#cp pure-ftpd.conf /usr/local/etc/
将pureftpd_php_manager目录拷贝到网站目录下
cp -R pureftpd_php_manager /opt/www/pureftpd_php_manager
四,配置服务
1:编辑/usr/local/etc/pure-ftpd.conf文件
找到
#CreateHomeDir yes
改为
CreateHomeDir yes
作用是,用户登录,如果主目录不存在,便自动建立.
找到
Umask 133:022
改为
Umask 755:755
设定新文件的默认属性.
找到
# MySQLConfigFile /etc/pureftpd-mysql.conf
改为
MySQLConfigFile /usr/local/etc/pureftpd-mysql.conf
设定ftpd服务的参数取得为pureftpd-mysql.conf
文件设置
#######################
存盘退出.
2:编辑/usr/local/etc/pureftpd-mysql.conf文件
它的大概样子是这样的
保存退出
请按您的实际情况修改.或者直接找错后复制过去.
3:修改/opt/www/pureftpd_php_manager/index.php文件
#unzip -d pureftpd_php_manager pureftpd_php_manager.zip
#cd pureftpd_php_manager
注：因为上面我已经写pureftpd-mysql.conf所以这里不用移动
#mv pureftpd-mysql.conf.sample /usr/local/etc/pureftpd-mysql.conf
#cp -R pureftpd_php_manager /var/wwwroot/html/pureftpd_php_manager
#cd /var/wwwroot/html/pureftpd_php_manager
#vi pureftp.config.php
修改:/opt/www/pureftpd_php_manager/pureftp.config.php文件
保存退出
五,创建启动服务环境
1:创见用户和组
#groupadd ftpusers -g 2004
#useradd ftpusers -g ftpusers -u 2004
2:创建数据库,以及数据表.
mysql>CREATE DATABASE pureftpd;
CREATE TABLE users (
User varchar(16) NOT NULL default '',
status enum('0','1') NOT NULL default '0',
Password varchar(64) NOT NULL default '',
Uid varchar(11) NOT NULL default '-1',
Gid varchar(11) NOT NULL default '-1',
Dir varchar(128) NOT NULL default '',
ULBandwidth smallint(5) NOT NULL default '0',
DLBandwidth smallint(5) NOT NULL default '0',
comment tinytext NOT NULL,
ipaccess varchar(15) NOT NULL default '*',
QuotaSize smallint(5) NOT NULL default '0',
QuotaFiles int(11) NOT NULL default 0,
PRIMARY KEY (User),
UNIQUE KEY User (User)
) TYPE=MyISAM;
或者使用phpmyadmin创见上边的数据表和数据库数据库名为pureftpd.
mysql>grant all on pureftpd.* to pureftpd@localhost identified by 'yourpassword'
mysql>FLUSH PRIVILEGES; //重载受权表
编辑/usr/local/etc/pureftpd-mysql.conf
将刚才在mysql中新建的用户和密码加入其中，选项很简单，只要注意不要输错
六、启动pureftpd
1:启动服务需要给定一些参数,以告知服务配置文件的位置.
方法一:
#/usr/local/pureftpd/sbin/pure-ftpd -l mysql:/usr/local/etc/pureftpd-mysql.conf &
方法二:
#/usr/local/sbin/pure-config.pl /usr/local/etc/pure-ftpd.conf
系统中需要安装有 Mysql+Apache+Dns(可选).
二,准备软件
Ftpd Server :
pure-ftpd-1.0.20.tar.gz
pureftpd_php_manager:
pureftpd_php_manager.tar.gz
三,定制安装
1:解压缩
到下载的两个文件所在目录.
#cd download
#tar zxvf pure-ftpd-1.0.20.tar.gz
#tar zxvf pureftpd_php_manager.tar.gz
2:编译
#cd pure-ftpd-1.0.20
#./configure /
--prefix=/usr/local/pureftpd /
--with-mysql=/usr/local/mysql /
--with-paranoidmsg /
--with-shadow /
--with-welcomemsg /
--with-uploadscript /
--with-quotas /
--with-cookie /
--with-pam /
--with-virtualhosts /
--with-virtualroot /
--with-diraliases /
--with-sysquotas /
--with-ratios /
--with-ftpwho /
--with-throttling /
--with-language=simplified-chinese --------------->>Socket 会话显示出来的信息的语言.缺省为英语,simplified-chinese 简体中文,traditional-chinese BIG5繁体中文
--with-mysql=/usr/local/mysql / 此处的 /usr/local/mysql 请改为你的mysql实际安装路径.如果出现类似configure: error: Your MySQL client libraries aren't properly installed 的错误,请将mysql目录下的 include/mysql下的mysql.h文件以及lib/mysql下的全部文件,连接(直接复制过去或许也可)到 /usr/lib 目录下
3:安装
#make
#make check
#make install
#cp pureftpd-mysql.conf /usr/local/etc/
#cd configuration-file
#chmod u+x pure-config.pl
#cp pure-config.pl /usr/local/sbin/
#cp /usr/local/pureftpd/sbin/pure-ftpwho /usr/local/sbin/
#cp pure-ftpd.conf /usr/local/etc/
将pureftpd_php_manager目录拷贝到网站目录下
cp -R pureftpd_php_manager /opt/www/pureftpd_php_manager
四,配置服务
1:编辑/usr/local/etc/pure-ftpd.conf文件
找到
#CreateHomeDir yes
改为
CreateHomeDir yes
作用是,用户登录,如果主目录不存在,便自动建立.
找到
Umask 133:022
改为
Umask 755:755
设定新文件的默认属性.
找到
# MySQLConfigFile /etc/pureftpd-mysql.conf
改为
MySQLConfigFile /usr/local/etc/pureftpd-mysql.conf
设定ftpd服务的参数取得为pureftpd-mysql.conf
文件设置
#######################
存盘退出.
2:编辑/usr/local/etc/pureftpd-mysql.conf文件
它的大概样子是这样的
源码:
##############################################
# #
# Sample Pure-FTPd Mysql configuration file. #
# See README.MySQL for explanations. #
# #
##############################################
# Optional : MySQL server name or IP. Don't define this for unix sockets.
MYSQLServer localhost
#服务器地址
# Optional : MySQL port. Don't define this if a local unix socket is used.
MYSQLPort 3306
#服务器端口
# Optional : define the location of mysql.sock if the server runs on this host.
MYSQLSocket /opt/mysql/var/mysql.sock
#这里换成你的真实地址
# Mandatory : user to bind the server as.
MYSQLUser root
#登录服务器用户名
# Mandatory : user password. You must have a password.
MYSQLPassword 123456
#登录服务器密码
# Mandatory : database to open.
MYSQLDatabase ftpd
#配置文件所在的数据库
# Mandatory : how passwords are stored
# Valid values are : "cleartext", "crypt", "md5" and "password"
# ("password" = MySQL password() function)
# You can also use "any" to try "crypt", "md5" *and* "password"
MYSQLCrypt cleartext
#验证方式
# In the following directives, parts of the strings are replaced at
# run-time before performing queries :
#
# /L is replaced by the login of the user trying to authenticate.
# /I is replaced by the IP address the user connected to.
# /P is replaced by the port number the user connected to.
# /R is replaced by the IP address the user connected from.
# /D is replaced by the remote IP address, as a long decimal number.
#
# Very complex queries can be performed using these substitution strings,
# especially for virtual hosting.
# Query to execute in order to fetch the password
MYSQLGetPW SELECT Password FROM users WHERE User="/L" AND status="1"
#登录服务器的用户密码验证字段,status="1"为此用户必需为激活模式.
# Query to execute in order to fetch the system user name or uid
MYSQLGetUID SELECT Uid FROM users WHERE User="/L"
#用户的UID
# Optional : default UID - if set this overrides MYSQLGetUID
#MYSQLDefaultUID 1000
# Query to execute in order to fetch the system user group or gid
MYSQLGetGID SELECT Gid FROM users WHERE User="/L"
#用户的Gid
# Optional : default GID - if set this overrides MYSQLGetGID
#MYSQLDefaultGID 1000
# Query to execute in order to fetch the home directory
MYSQLGetDir SELECT Dir FROM users WHERE User="/L"
#用户的主目录
# Optional : query to get the maximal number of files
# Pure-FTPd must have been compiled with virtual quotas support.
MySQLGetQTAFS SELECT QuotaFiles FROM users WHERE User="/L"
#用户的最大文件数量
# Optional : query to get the maximal disk usage (virtual quotas)
# The number should be in Megabytes.
# Pure-FTPd must have been compiled with virtual quotas support.
MySQLGetQTASZ SELECT QuotaSize FROM users WHERE User="/L"
#用户的最大磁盘空间
# Optional : ratios. The server has to be compiled with ratio support.
MySQLGetRatioUL SELECT ULBandwidth FROM users WHERE User="/L"
MySQLGetRatioDL SELECT DLBandwidth FROM users WHERE User="/L"
#上边两项为,用户上传与下载的速度,单位 Kb/s
# Optional : bandwidth throttling.
# The server has to be compiled with throttling support.
# Values are in KB/s .
# MySQLGetBandwidthUL SELECT ULBandwidth FROM users WHERE User="/L"
# MySQLGetBandwidthDL SELECT DLBandwidth FROM users WHERE User="/L"
# Enable ~ expansion. NEVER ENABLE THIS BLINDLY UNLESS :
# 1) You know what you are doing.
# 2) Real and virtual users match.
# MySQLForceTildeExpansion 1
# If you upgraded your tables to transactionnal tables (Gemini,
# BerkeleyDB, Innobase...), you can enable SQL transactions to
# avoid races. Leave this commented if you are using the
# traditionnal MyIsam databases or old (< 3.23.x) MySQL versions.
# MySQLTransactions On
保存退出
请按您的实际情况修改.或者直接找错后复制过去.
3:修改/opt/www/pureftpd_php_manager/index.php文件
#unzip -d pureftpd_php_manager pureftpd_php_manager.zip
#cd pureftpd_php_manager
注：因为上面我已经写pureftpd-mysql.conf所以这里不用移动
#mv pureftpd-mysql.conf.sample /usr/local/etc/pureftpd-mysql.conf
#cp -R pureftpd_php_manager /var/wwwroot/html/pureftpd_php_manager
#cd /var/wwwroot/html/pureftpd_php_manager
#vi pureftp.config.php
修改:/opt/www/pureftpd_php_manager/pureftp.config.php文件
源码:
######################
####### SETUP ########
######################
// 设置pureftpd-mysql.conf的位置,这个要注意，不要写错哦
$PUREFTP_CONFIG_FILE = '/usr/local/etc/pureftpd-mysql.conf';
// The location where all the Forms directed to. (Mayby no change needed)
$SELF_URL = 'index.php';
// The location of your pure-ftpdwho binary (set this to chmod 4711)
$FTP_WHO = "/usr/local/sbin/pure-ftpwho";
#######################
# DEFAULT NEW-USER PARAMS #
#######################
$DB_TABLE='users'; #新增加变量,定义数据表名
$DefaultUser = "ftpuser"; # 默认用户
$DefaultPass = "passwd"; # 默认初始用户密码
$DefaultUid = "2004"; # 默认的uid(设置为apache的uid,你的或许不是48,为PHP建立的目录能够正常使用而设置)
$DefaultGid = "2004"; # 默认的gid(设置为apache的gid,你的或许不是48,为PHP建立的目录能够正常使用而设置)
$DefaultDir = "/var/ftproot/ftpusershome"; # 默认的用户主目录
$DefaultUL = "0"; # 默认用户上传速率限制(KB/S)
$DefaultDL = "0"; # 默认用户下载速率限制(KB/S)
$Defaultip = "*"; # 设置用户可以从哪些IP登陆
$DefaultQS = "50"; # 用户默认的quota
$Defaultcmt = ""; # 默认备注信息
$DefaultQF = "0"; # 默认文件数目quota
$PWC = "55"; # Vorsatz fuerr Crypt Password
保存退出
五,创建启动服务环境
1:创见用户和组
#groupadd ftpusers -g 2004
#useradd ftpusers -g ftpusers -u 2004
2:创建数据库,以及数据表.
mysql>CREATE DATABASE pureftpd;
CREATE TABLE users (
User varchar(16) NOT NULL default '',
status enum('0','1') NOT NULL default '0',
Password varchar(64) NOT NULL default '',
Uid varchar(11) NOT NULL default '-1',
Gid varchar(11) NOT NULL default '-1',
Dir varchar(128) NOT NULL default '',
ULBandwidth smallint(5) NOT NULL default '0',
DLBandwidth smallint(5) NOT NULL default '0',
comment tinytext NOT NULL,
ipaccess varchar(15) NOT NULL default '*',
QuotaSize smallint(5) NOT NULL default '0',
QuotaFiles int(11) NOT NULL default 0,
PRIMARY KEY (User),
UNIQUE KEY User (User)
) TYPE=MyISAM;
或者使用phpmyadmin创见上边的数据表和数据库数据库名为pureftpd.
mysql>grant all on pureftpd.* to pureftpd@localhost identified by 'yourpassword'
mysql>FLUSH PRIVILEGES; //重载受权表
编辑/usr/local/etc/pureftpd-mysql.conf
将刚才在mysql中新建的用户和密码加入其中，选项很简单，只要注意不要输错
六、启动pureftpd
1:启动服务需要给定一些参数,以告知服务配置文件的位置.
方法一:
#/usr/local/pureftpd/sbin/pure-ftpd -l mysql:/usr/local/etc/pureftpd-mysql.conf &
方法二:
#/usr/local/sbin/pure-config.pl /usr/local/etc/pure-ftpd.conf