cx_freeze 打包 python 程序 缺少 vc 运行库的解决方法

参考 wxpython  的说明文档

如下：主要看标红的文字,  在所述位置找到相应文件copy到发布的目录并修改相应 .manifest 文件，使版本号一致。

 

------------------------------------------------------------------------------------------------------------

Using cx_freeze to freeze your application

The following will explain how to freeze a Python/wxPython application using the cx_freeze tool.

What Objects are Involved

You will need a working development environment including

* Python

* wxPython

* cx_freeze

* Gui2Exe - by Andrea Gavana

Process Overview

A small sample wxPython "Hello world" application will be used to demonstrate the process. I created the tiny application using Boa Constructor but you could use any other IDE you use for your wxPython development. I did the initial creation of the setup.py file with Gui2Exe and then keep maintaining it and running it from the IDE (Boa in my case).

Special Concerns

Python 2.5x

• you will need the MS C run time dll 'msvcr71.dll', included with Python
• the dll 'gdiplus.dll' might also be needed depending on what wxPython widgets you use

• the appname.manifest file (needed to get the nice themed widgets on XP+) can be generated by checking the appropriate option in Gui2Exe

Python 2.6x

• you will need the MS C run time dll's (msvcr90.dll, msvcp90.dll, msvcm90.dll), included with Python (additional information provided below)
• you will need a copy of the Microsoft.VC90.CRT.manifest file, additional information provided below
• the dll 'gdiplus.dll' might also be needed depending on what wxPython widgets you use

• do not check the manifest option in Gui2Exe - to be verified

The setup.py

Save the following code in your working folder as a file called 'setup.py'.

I selected the "Compressed" option which created two .zip files to reduce the number of files to distribute, it also automagically copied the required dll's needed by Python and wxPython into the "dist" folder.

To deliver a single file to your end-users check out the InnoSetup page.

To "freeze" the application you run the following command from the command line in your working folder.

\python26\python setup.py build

 1 # Let's start with some default (for me) imports...
 2 
 3 from cx_Freeze import setup, Executable
 4 
 5 
 6 
 7 # Process the includes, excludes and packages first
 8 
 9 includes = []
 10 excludes = ['_gtkagg', '_tkagg', 'bsddb', 'curses', 'email', 'pywin.debugger',
 11             'pywin.debugger.dbgcon', 'pywin.dialogs', 'tcl',
 12             'Tkconstants', 'Tkinter']
 13 packages = []
 14 path = []
 15 
 16 # This is a place where the user custom code may go. You can do almost
 17 # whatever you want, even modify the data_files, includes and friends
 18 # here as long as they have the same variable name that the setup call
 19 # below is expecting.
 20 
 21 # No custom code added
 22 
 23 # The setup for cx_Freeze is different from py2exe. Here I am going to
 24 # use the Python class Executable from cx_Freeze
 25 
 26 
 27 GUI2Exe_Target_1 = Executable(
 28     # what to build
 29     script = "simplewx.py",
 30     initScript = None,
 31     base = 'Win32GUI',
 32     targetDir = r"dist",
 33     targetName = "simplewx.exe",
 34     compress = True,
 35     copyDependentFiles = True,
 36     appendScriptToExe = False,
 37     appendScriptToLibrary = False,
 38     icon = None
 39     )
 40 
 41 
 42 # That's serious now: we have all (or almost all) the options cx_Freeze
 43 # supports. I put them all even if some of them are usually defaulted
 44 # and not used. Some of them I didn't even know about.
 45 
 46 setup(
 47 
 48     version = "0.1",
 49     description = "No Description",
 50     author = "No Author",
 51     name = "cx_Freeze Sample File",
 52 
 53     options = {"build_exe": {"includes": includes,
 54                              "excludes": excludes,
 55                              "packages": packages,
 56                              "path": path
 57                              }
 58                },
 59 
 60     executables = [GUI2Exe_Target_1]
 61     )
 62 
 63 # This is a place where any post-compile code may go.
 64 # You can add as much code as you want, which can be used, for example,
 65 # to clean up your folders or to do some particular post-compilation
 66 # actions.
 67 
 68 # No post-compilation code added
 69 
 70 
 71 # And we are done. That's a setup script :-D

The MS manifest

Following is the content of the Microsoft manifest file ("Microsoft.VC90.CRT.manifest"), note that the content of "version" and "publicKeyToken" are specific to the version of the dll files.

Installing Python 2.6 on Windows with the option "for this user only" this manifest file is created in the Python26 folder, note the Py26 installer does not offer the "for this user only" option on Vista.

If you install Python 2.6 for all users then these files are found in "C:\Windows\winsxs",

i.e. in "C:\Windows\winsxs\Manifests" you will find guess what the manifest and it would be called "x86_microsoft.vc90.crt_1fc8b3b9a1e18e3b_9.0.21022.8_none_bcb86ed6ac711f91.manifest" and then in "C:\Windows\winsxs\x86_microsoft.vc90.crt_1fc8b3b9a1e18e3b_9.0.21022.8_none_bcb86ed6ac711f91" you will find the dll's.

Note that the folder names contain the version number, so with Python 2.6.2 you should use version 9.0.21022.8 manifest and dll's.

<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<!-- Copyright (c) Microsoft Corporation.  All rights reserved. -->
<assembly xmlns="urn:schemas-microsoft-com:asm.v1" manifestVersion="1.0">
    <noInheritable/>
    <assemblyIdentity
        type="win32"
        name="Microsoft.VC90.CRT"
        version="9.0.21022.8"
        processorArchitecture="x86"
        publicKeyToken="1fc8b3b9a1e18e3b"
    />
    <file name="msvcr90.dll" /> <file name="msvcp90.dll" /> <file name="msvcm90.dll" />
</assembly>

Sample wxPython application

Save the following code in your working folder as a file called 'simplewx.py'.

 1 #Boa:Frame:Frame1
 2 
 3 import wx
 4 
 5 def create(parent):
 6     return Frame1(parent)
 7 
 8 [wxID_FRAME1, wxID_FRAME1BUTTON1, wxID_FRAME1BUTTON2, wxID_FRAME1PANEL1,
 9  wxID_FRAME1STATICTEXT1,
 10 ] = [wx.NewId() for _init_ctrls in range(5)]
 11 
 12 class Frame1(wx.Frame):
 13     def _init_coll_bsPanel_Items(self, parent):
 14         # generated method, don't edit
 15 
 16         parent.AddWindow(self.staticText1, 0, border=10,
 17               flag=wx.ALIGN_CENTER_VERTICAL | wx.ALIGN_CENTER_HORIZONTAL | wx.ALL | wx.EXPAND)
 18         parent.AddSizer(self.fgsButtons, 1, border=2, flag=wx.ALL | wx.EXPAND)
 19 
 20     def _init_coll_fgsButtons_Items(self, parent):
 21         # generated method, don't edit
 22 
 23         parent.AddWindow(self.button1, 1, border=2, flag=wx.ALL | wx.EXPAND)
 24         parent.AddWindow(self.button2, 1, border=2, flag=wx.ALL | wx.EXPAND)
 25 
 26     def _init_coll_bsFrame_Items(self, parent):
 27         # generated method, don't edit
 28 
 29         parent.AddWindow(self.panel1, 1, border=2,
 30               flag=wx.EXPAND | wx.ALL | wx.ALIGN_CENTER_VERTICAL | wx.ALIGN_CENTER_HORIZONTAL)
 31 
 32     def _init_coll_fgsButtons_Growables(self, parent):
 33         # generated method, don't edit
 34 
 35         parent.AddGrowableCol(0)
 36         parent.AddGrowableCol(1)
 37 
 38     def _init_sizers(self):
 39         # generated method, don't edit
 40         self.bsPanel = wx.BoxSizer(orient=wx.VERTICAL)
 41 
 42         self.bsFrame = wx.BoxSizer(orient=wx.VERTICAL)
 43 
 44         self.fgsButtons = wx.FlexGridSizer(cols=2, hgap=0, rows=0, vgap=0)
 45 
 46         self._init_coll_bsPanel_Items(self.bsPanel)
 47         self._init_coll_bsFrame_Items(self.bsFrame)
 48         self._init_coll_fgsButtons_Items(self.fgsButtons)
 49         self._init_coll_fgsButtons_Growables(self.fgsButtons)
 50 
 51         self.SetSizer(self.bsFrame)
 52         self.panel1.SetSizer(self.bsPanel)
 53 
 54     def _init_ctrls(self, prnt):
 55         # generated method, don't edit
 56         wx.Frame.__init__(self, id=wxID_FRAME1, name='', parent=prnt,
 57               pos=wx.Point(642, 279), size=wx.Size(236, 106),
 58               style=wx.DEFAULT_FRAME_STYLE, title='Frame1')
 59         self.SetClientSize(wx.Size(220, 70))
 60 
 61         self.panel1 = wx.Panel(id=wxID_FRAME1PANEL1, name='panel1', parent=self,
 62               pos=wx.Point(2, 2), size=wx.Size(216, 66),
 63               style=wx.TAB_TRAVERSAL)
 64 
 65         self.staticText1 = wx.StaticText(id=wxID_FRAME1STATICTEXT1,
 66               label=u'Hello world!', name='staticText1', parent=self.panel1,
 67               pos=wx.Point(10, 10), size=wx.Size(196, 13),
 68               style=wx.ALIGN_CENTRE)
 69 
 70         self.button1 = wx.Button(id=wxID_FRAME1BUTTON1, label='button1',
 71               name='button1', parent=self.panel1, pos=wx.Point(4, 37),
 72               size=wx.Size(100, 23), style=0)
 73 
 74         self.button2 = wx.Button(id=wxID_FRAME1BUTTON2, label='button2',
 75               name='button2', parent=self.panel1, pos=wx.Point(116, 37),
 76               size=wx.Size(100, 23), style=0)
 77 
 78         self._init_sizers()
 79 
 80     def __init__(self, parent):
 81         self._init_ctrls(parent)
 82 
 83 
 84 if __name__ == '__main__':
 85     app = wx.PySimpleApp()
 86     frame = create(None)
 87     frame.Show()
 88 
 89     app.MainLoop()