OpenStack Grizzly Quantum Multihost 部署
本文主要介绍multihost模式下的openstack多节点部署，这种模式可以避免随着节点的增多，流量膨胀一个网络节点无法满足需求的情况。当然如果只是自己搞一台host，在上面虚拟几台VM做实验，或者小型创业公司，通过在五台十台机器上的虚拟化，创建一些VM给公司内部开发测试团队使用，那么使用多节点模式即可，即一个控制节点、一个网络节点、多个计算节点。在Essxi中nova-network的mutihost可以很好分担网络节点的负载，同样在Quantum中也有类似的功能，本文主要参考一位网友Geek的blog所写，做了适当修改，在我的环境里验证没有问题，这里记录下来也仅供大家参考！
环境需求：
管理网络： 172.16.0.0/16
业务网络： 10.10.10.0/24
外部网络： 192.168.80.0/24
我这里使用的是三台机器，你也可以横向扩展，增加计算节点的数量。
| Node Role: |
NICs |
| Control Node: |
eth0 (192.168.80.21), eth1 (172.16.0.51) |
| Compute1 Node: |
eth0(192.168.80.22),eth1(172.16.0.52),eth2(10.10.10.52) |
| Compute2 Node: |
eth0(192.168.80.23),eth1(172.16.0.53),eth2(10.10.10.53) |
控制节点
网络设置
cat /etc/network/interfaces # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet static address 192.168.80.21 netmask 255.255.255.0 gateway 192.168.80.1 dns-nameservers 8.8.8.8 auto eth1 iface eth1 inet static address 172.16.0.51 netmask 255.255.0.0
添加源
添加 Grizzly 源，并升级系统
cat > /etc/apt/sources.list.d/grizzly.list << _ESXU_ deb http://ubuntu-cloud.archive.canonical.com/ubuntu precise-updates/grizzly main deb http://ubuntu-cloud.archive.canonical.com/ubuntu precise-proposed/grizzly main _ESXU_ apt-get install ubuntu-cloud-keyring apt-get update apt-get upgrade
MySQL & RabbitMQ
- 安装 MySQL：
apt-get install mysql-server python-mysqldb
- 使用sed编辑 /etc/mysql/my.cnf文件的更改绑定地址（0.0.0.0）从本地主机（127.0.0.1）
禁止 mysql 做域名解析，防止连接 mysql出现错误和远程连接 mysql慢的现象。
然后重新启动mysql服务.
sed -i 's/127.0.0.1/0.0.0.0/g' /etc/mysql/my.cnf sed -i '44 i skip-name-resolve' /etc/mysql/my.cnf /etc/init.d/mysql restart
安装 RabbitMQ：
apt-get install rabbitmq-server
NTP
- 安装 NTP 服务
apt-get install ntp
配置NTP服务器计算节点控制器节点之间的同步：
sed -i 's/server ntp.ubuntu.com/server ntp.ubuntu.com\nserver 127.127.1.0\nfudge 127.127.1.0 stratum 10/g' /etc/ntp.conf service ntp restart
- 开启路由转发
vim /etc/sysctl.conf net.ipv4.ip_forward=1
Keystone
- 安装 Keystone
apt-get install keystone
在 mysql 里创建 keystone 数据库并授权：
mysql -uroot -p create database keystone; grant all on keystone.* to 'keystone'@'%' identified by 'keystone'; quit;
修改 /etc/keystone/keystone.conf 配置文件:
admin_token = www.longgeek.com debug = True verbose = True [sql] connection = mysql://keystone:[email protected]/keystone #必须写到 [sql] 下面 [signing] token_format = UUID
启动 keystone 然后同步数据库
/etc/init.d/keystone restart keystone-manage db_sync
用脚本导入数据：
用脚本来创建 user、role、tenant、service、endpoint，下载脚本：
wget http://192.168.80.8/ubuntu/keystone.sh
修改脚本内容：
ADMIN_PASSWORD=${ADMIN_PASSWORD:-password}
SERVICE_PASSWORD=${SERVICE_PASSWORD:-password}
export SERVICE_TOKEN="admin"
export SERVICE_ENDPOINT="http://172.16.0.51:35357/v2.0"
SERVICE_TENANT_NAME=${SERVICE_TENANT_NAME:-service}
KEYSTONE_REGION=RegionOne
# If you need to provide the service, please to open keystone_wlan_ip and swift_wlan_ip
# of course you are a multi-node architecture, and swift service
# corresponding ip address set the following variables
KEYSTONE_IP="172.16.0.51"
#KEYSTONE_WLAN_IP="172.16.0.51"
SWIFT_IP="172.16.0.51"
#SWIFT_WLAN_IP="172.16.0.51"
COMPUTE_IP=$KEYSTONE_IP
EC2_IP=$KEYSTONE_IP
GLANCE_IP=$KEYSTONE_IP
VOLUME_IP=$KEYSTONE_IP
QUANTUM_IP=$KEYSTONE_IP
在这里更改你的管理员密码即可，IP地址也可根据自己环境更改下！
执行脚本：
sh keystone.sh
设置环境变量：
这里变量对于 keystone.sh 里的设置：
cat > /etc/profile << _ESXU_ export OS_TENANT_NAME=admin #这里如果设置为 service 其它服务会无法验证. export OS_USERNAME=admin export OS_PASSWORD=password export OS_AUTH_URL=http://172.16.0.51:5000/v2.0/ export OS_REGION_NAME=RegionOne export SERVICE_TOKEN=admin export SERVICE_ENDPOINT=http://172.16.0.51:35357/v2.0/ _ESXU_ # source /root/profile #使环境变量生效
Glance
- 安装 Glance
apt-get install glance
- 创建一个 glance 数据库并授权：
mysql -uroot -p create database glance; grant all on glance.* to 'glance'@'%' identified by 'glance';
- 更新 /etc/glance/glance-api.conf 文件：
verbose = True debug = True sql_connection = mysql://glance:[email protected]/glance workers = 4 registry_host = 172.16.0.51 notifier_strategy = rabbit rabbit_host = 172.16.0.51 rabbit_userid = guest rabbit_password = guest [keystone_authtoken] auth_host = 172.16.0.51 auth_port = 35357 auth_protocol = http admin_tenant_name = service admin_user = glance admin_password = password [paste_deploy] config_file = /etc/glance/glance-api-paste.ini flavor = keystone
- 更新 /etc/glance/glance-registry.conf 文件：
verbose = True debug = True sql_connection = mysql://glance:[email protected]/glance [keystone_authtoken] auth_host = 172.16.0.51 auth_port = 35357 auth_protocol = http admin_tenant_name = service admin_user = glance admin_password = password [paste_deploy] config_file = /etc/glance/glance-registry-paste.ini flavor = keystone
启动 glance-api 和 glance-registry 服务并同步到数据库：
/etc/init.d/glance-api restart /etc/init.d/glance-registry restart glance-manage version_control 0 glance-manage db_sync
测试 glance 的安装，上传一个镜像。下载 Cirros 镜像并上传:
wget https://launchpad.net/cirros/trunk/0.3.0/+download/ cirros-0.3.0-x86_64-disk.img glance image-create --name='cirros' --public --container-format=ovf --disk-format=qcow2 < ./cirros-0.3.0-x86_64-disk.img
- 查看上传的镜像：
glance image-list
Quantum
- 安装 Quantum server和 OpenVSwitch包：
apt-get install quantum-server quantum-plugin-openvswitch
- 创建 quantum 数据库并授权用户访问：
mysql -uroot -p create database quantum; grant all on quantum.* to 'quantum'@'%' identified by 'quantum'; quit;
编辑 /etc/quantum/quantum.conf文件
[DEFAULT] debug = True verbose = True state_path = /var/lib/quantum lock_path = $state_path/lock bind_host = 0.0.0.0 bind_port = 9696 core_plugin = quantum.plugins.openvswitch.ovs_quantum_plugin.OVSQuantumPluginV2 api_paste_config = /etc/quantum/api-paste.ini control_exchange = quantum rabbit_host = 172.16.0.51 rabbit_password = guest rabbit_port = 5672 rabbit_userid = guest notification_driver = quantum.openstack.common.notifier.rpc_notifier default_notification_level = INFO notification_topics = notifications [QUOTAS] [DEFAULT_SERVICETYPE] [AGENT] root_helper = sudo quantum-rootwrap /etc/quantum/rootwrap.conf [keystone_authtoken] auth_host = 172.16.0.51 auth_port = 35357 auth_protocol = http admin_tenant_name = service admin_user = quantum admin_password = password signing_dir = /var/lib/quantum/keystone-signing
- 编辑 OVS 插件配置文件 /etc/quantum/plugins/openvswitch/ovs_quantum_plugin.ini:
[DATABASE] sql_connection = mysql://quantum:[email protected]/quantum reconnect_interval = 2 [OVS] tenant_network_type = gre enable_tunneling = True tunnel_id_ranges = 1:1000 [AGENT] polling_interval = 2 [SECURITYGROUP]
启动 quantum 服务：
/etc/init.d/quantum-server restart
Nova
- 安装 Nova 相关软件包：
apt-get install nova-api nova-cert novnc nova-conductor nova-consoleauth nova-scheduler nova-novncproxy
创建 nova 数据库，授权 nova 用户访问它：
mysql -uroot -p create database nova; grant all on nova.* to 'nova'@'%' identified by 'nova'; quit;
在 /etc/nova/api-paste.ini 中修改 autotoken 验证部分：
[filter:authtoken] paste.filter_factory = keystoneclient.middleware.auth_token:filter_factory auth_host = 172.16.0.51 auth_port = 35357 auth_protocol = http admin_tenant_name = service admin_user = nova admin_password = password signing_dir = /tmp/keystone-signing-nova # Workaround for https://bugs.launchpad.net/nova/+bug/1154809 auth_version = v2.0
修改 /etc/nova/nova.conf， 类似下面这样：
[DEFAULT] # LOGS/STATE debug = False verbose = True logdir = /var/log/nova state_path = /var/lib/nova lock_path = /var/lock/nova rootwrap_config = /etc/nova/rootwrap.conf dhcpbridge = /usr/bin/nova-dhcpbridge # SCHEDULER compute_scheduler_driver = nova.scheduler.filter_scheduler.FilterScheduler ## VOLUMES volume_api_class = nova.volume.cinder.API # DATABASE sql_connection = mysql://nova:[email protected]/nova # COMPUTE libvirt_type = kvm compute_driver = libvirt.LibvirtDriver instance_name_template = instance-%08x api_paste_config = /etc/nova/api-paste.ini # COMPUTE/APIS: if you have separate configs for separate services # this flag is required for both nova-api and nova-compute allow_resize_to_same_host = True # APIS osapi_compute_extension = nova.api.openstack.compute.contrib.standard_extensions ec2_dmz_host = 172.16.0.51 s3_host = 172.16.0.51 metadata_host = 172.16.0.51 metadata_listen = 0.0.0.0 # RABBITMQ rabbit_host = 172.16.0.51 rabbit_password = guest # GLANCE image_service = nova.image.glance.GlanceImageService glance_api_servers = 172.16.0.51:9292 # NETWORK network_api_class = nova.network.quantumv2.api.API quantum_url = http://172.16.0.51:9696 quantum_auth_strategy = keystone quantum_admin_tenant_name = service quantum_admin_username = quantum quantum_admin_password = password quantum_admin_auth_url = http://172.16.0.51:35357/v2.0 service_quantum_metadata_proxy = True libvirt_vif_driver = nova.virt.libvirt.vif.LibvirtHybridOVSBridgeDriver linuxnet_interface_driver = nova.network.linux_net.LinuxOVSInterfaceDriver firewall_driver = nova.virt.libvirt.firewall.IptablesFirewallDriver # NOVNC CONSOLE novncproxy_base_url = http://192.168.8.51:6080/vnc_auto.html # Change vncserver_proxyclient_address and vncserver_listen to match each compute host vncserver_proxyclient_address = 192.168.8.51 vncserver_listen = 0.0.0.0 # AUTHENTICATION auth_strategy = keystone [keystone_authtoken] auth_host = 172.16.0.51 auth_port = 35357 auth_protocol = http admin_tenant_name = service admin_user = nova admin_password = password signing_dir = /tmp/keystone-signing-nova
同步数据库，启动 nova 相关服务：
nova-manage db sync cd /etc/init.d/; for i in $( ls nova-* ); do sudo /etc/init.d/$i restart; done
检查 nova 相关服务笑脸
nova-manage service list # nova-manage service list Binary Host Zone Status State Updated_At nova-cert control internal enabled :-) 2013-05-07 07:09:56 nova-conductor control internal enabled :-) 2013-05-07 07:09:55 nova-consoleauth control internal enabled :-) 2013-05-07 07:09:56 nova-scheduler control internal enabled :-) 2013-05-07 07:09:56
Horizon
- 安装 horizon：
apt-get install openstack-dashboard memcached
如果你不喜欢 Ubuntu 的主题，可以禁用它，使用默认界面：
sed -i 's/127.0.0.1/172.16.0.51/g' /etc/openstack-dashboard/local_settings.py sed -i 's/127.0.0.1/172.16.0.51/g' /etc/memcached.conf vim /etc/openstack-dashboard/local_settings.py DEBUG = True # Enable the Ubuntu theme if it is present. #try: # from ubuntu_theme import * #except ImportError: # pass
重新加载 apache2 和 memcache：
/etc/init.d/apache2 restart /etc/init.d/memcached restart
现在可以通过浏览器 http://192.168.8.51/horizon 使用 admin:password 来登录界面。
所有计算节点
网络设置
所有计算节点安装方法相同，只需要替换 IP 地址即可：
# cat /etc/network/interfaces
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
auto eth0
iface eth0 inet manual
up ifconfig $IFACE 0.0.0.0 up
up ip link set $IFACE promisc on
down ip link set $IFACE promisc off
down ifconfig $IFACE down
auto br-ex
iface br-ex inet static
address 192.168.80.22
netmask 255.255.255.0
gateway 192.168.80.1
dns-nameservers 8.8.8.8
#address 192.168.80.22
#netmask 255.255.255.0
#gateway 192.168.80.1
#dns-nameservers 8.8.8.8
auto eth1
iface eth1 inet static
address 172.16.0.52
netmask 255.255.0.0
auto eth2
iface eth2 inet static
address 10.10.10.52
netmask 255.255.255.0
添加源
- 添加 Grizzly 源，并升级系统
cat > /etc/apt/sources.list.d/grizzly.list << _GEEK_ deb http://ubuntu-cloud.archive.canonical.com/ubuntu precise-updates/grizzly main deb http://ubuntu-cloud.archive.canonical.com/ubuntu precise-proposed/grizzly main _GEEK_ apt-get update apt-get upgrade apt-get install ubuntu-cloud-keyring
- 设置 ntp 和开启路由转发:
# apt-get install ntp # sed -i 's/server ntp.ubuntu.com/server 172.16.0.51/g' /etc/ntp.conf # service ntp restart # vim /etc/sysctl.conf net.ipv4.ip_forward=1 # sysctl -p
OpenVSwitch
- 安装 openVSwitch:
必须按照下面安装顺序:
apt-get install openvswitch-datapath-source module-assistant auto-install openvswitch-datapath apt-get install openvswitch-switch openvswitch-brcompat
设置 ovs-brcompatd 启动：
sed -i 's/# BRCOMPAT=no/BRCOMPAT=yes/g' /etc/default/openvswitch-switch echo 'brcompat' >> /etc/modules
启动 openvswitch-switch:
/etc/init.d/openvswitch-switch restart * ovs-brcompatd is not running # brcompatd 没有启动,尝试再次启动. * ovs-vswitchd is not running * ovsdb-server is not running * Inserting openvswitch module * /etc/openvswitch/conf.db does not exist * Creating empty database /etc/openvswitch/conf.db * Starting ovsdb-server * Configuring Open vSwitch system IDs * Starting ovs-vswitchd * Enabling gre with iptables
再次启动,直到 ovs-brcompatd、ovs-vswitchd、ovsdb-server等服务都启动：
# /etc/init.d/openvswitch-switch restart # lsmod | grep brcompat brcompat 13512 0 openvswitch 84038 7 brcompat
如果还是启动不了的话，用下面命令：
/etc/init.d/openvswitch-switch force-reload-kmod
创建网桥：
ovs-vsctl add-br br-int # br-int 用于 vm 整合 ovs-vsctl add-br br-ex # br-ex 用于从互联网上访问 vm ovs-vsctl add-port br-ex eth0 # br-ex 桥接到 eth0
- 重启网卡可能会出现：
/etc/init.d/networking restart RTNETLINK answers: File exists Failed to bring up br-ex.
br-ex 可能有 ip 地址，但没有网关和 DNS，需要手工配置一下，或者重启机器. 重启机器后就正常了
- 查看桥接的网络
ovs-vsctl list-br ovs-vsctl show
Quantum
- 安装 Quantum openvswitch agent, metadata-agent l3 agent 和 dhcp agent:
apt-get install quantum-plugin-openvswitch-agent quantum-dhcp-agent quantum-l3-agent quantum-metadata-agent
- 编辑 /etc/quantum/quantum.conf 文件：
[DEFAULT] debug = True verbose = True state_path = /var/lib/quantum lock_path = $state_path/lock bind_host = 0.0.0.0 bind_port = 9696 core_plugin = quantum.plugins.openvswitch.ovs_quantum_plugin.OVSQuantumPluginV2 api_paste_config = /etc/quantum/api-paste.ini control_exchange = quantum rabbit_host = 172.16.0.51 rabbit_password = guest rabbit_port = 5672 rabbit_userid = guest notification_driver = quantum.openstack.common.notifier.rpc_notifier default_notification_level = INFO notification_topics = notifications [QUOTAS] [DEFAULT_SERVICETYPE] [AGENT] root_helper = sudo quantum-rootwrap /etc/quantum/rootwrap.conf [keystone_authtoken] auth_host = 172.16.0.51 auth_port = 35357 auth_protocol = http admin_tenant_name = service admin_user = quantum admin_password = password signing_dir = /var/lib/quantum/keystone-signing
编辑 OVS 插件配置文件 /etc/quantum/plugins/openvswitch/ovs_quantum_plugin.ini:
[DATABASE] sql_connection = mysql://quantum:[email protected]/quantum reconnect_interval = 2 [OVS] enable_tunneling = True tenant_network_type = gre tunnel_id_ranges = 1:1000 local_ip = 10.10.10.52 integration_bridge = br-int tunnel_bridge = br-tun [AGENT] polling_interval = 2 [SECURITYGROUP]
编辑 /etc/quantum/l3_agent.ini:
[DEFAULT] debug = True verbose = True use_namespaces = True external_network_bridge = br-ex signing_dir = /var/cache/quantum admin_tenant_name = service admin_user = quantum admin_password = password auth_url = http://172.16.0.51:35357/v2.0 l3_agent_manager = quantum.agent.l3_agent.L3NATAgentWithStateReport root_helper = sudo quantum-rootwrap /etc/quantum/rootwrap.conf interface_driver = quantum.agent.linux.interface.OVSInterfaceDriver enable_multi_host = True
编辑 /etc/quantum/dhcp_agent.ini:
[DEFAULT] debug = True verbose = True use_namespaces = True signing_dir = /var/cache/quantum admin_tenant_name = service admin_user = quantum admin_password = password auth_url = http://172.16.0.51:35357/v2.0 dhcp_agent_manager = quantum.agent.dhcp_agent.DhcpAgentWithStateReport root_helper = sudo quantum-rootwrap /etc/quantum/rootwrap.conf state_path = /var/lib/quantum interface_driver = quantum.agent.linux.interface.OVSInterfaceDriver dhcp_driver = quantum.agent.linux.dhcp.Dnsmasq enable_multi_host = True enable_isolated_metadata = False
编辑 /etc/quantum/metadata_agent.ini：
[DEFAULT] debug = True auth_url = http://172.16.0.51:35357/v2.0 auth_region = RegionOne admin_tenant_name = service admin_user = quantum admin_password = password state_path = /var/lib/quantum nova_metadata_ip = 172.16.0.51 nova_metadata_port = 8775
启动 quantum 所有服务：
service quantum-plugin-openvswitch-agent restart service quantum-dhcp-agent restart service quantum-l3-agent restart service quantum-metadata-agent restart
Cinder
- 安装 Cinder 需要的包：
apt-get install cinder-api cinder-common cinder-scheduler cinder-volume python-cinderclient iscsitarget open-iscsi iscsitarget-dkms
配置 iscsi 并启动服务：
sed -i 's/false/true/g' /etc/default/iscsitarget /etc/init.d/iscsitarget restart /etc/init.d/open-iscsi restart
创建 cinder 数据库并授权用户访问：
mysql -uroot -p create database cinder; grant all on cinder.* to 'cinder'@'%' identified by 'cinder'; quit;
修改 /etc/cinder/cinder.conf：
cat /etc/cinder/cinder.conf [DEFAULT] # LOG/STATE verbose = True debug = False iscsi_helper = ietadm auth_strategy = keystone volume_group = cinder-volumes volume_name_template = volume-%s state_path = /var/lib/cinder volumes_dir = /var/lib/cinder/volumes rootwrap_config = /etc/cinder/rootwrap.conf api_paste_config = /etc/cinder/api-paste.ini # RPC rabbit_host = 172.16.0.51 rabbit_password = guest rpc_backend = cinder.openstack.common.rpc.impl_kombu # DATABASE sql_connection = mysql://cinder:[email protected]/cinder # API osapi_volume_extension = cinder.api.contrib.standard_extensions
修改 /etc/cinder/api-paste.ini 文件末尾 [filter:authtoken] 字段 :
[filter:authtoken] paste.filter_factory = keystoneclient.middleware.auth_token:filter_factory service_protocol = http service_host = 172.16.0.51 service_port = 5000 auth_host = 172.16.0.51 auth_port = 35357 auth_protocol = http admin_tenant_name = service admin_user = cinder admin_password = password signing_dir = /var/lib/cinder
- 创建一个卷组，命名为 cinder-volumes:
创建一个普通分区，我这里用的sdb，创建了一个主分区，大小为所有空间
# fdisk /dev/sdb n p 1 Enter Enter t 8e w # partx -a /dev/sdb # pvcreate /dev/sdb1 # vgcreate cinder-volumes /dev/sdb1 # vgs VG #PV #LV #SN Attr VSize VFree cinder-volumes 1 7 0 wz--n- 1.64t 75.50g
- 同步数据库并重启服务：
cinder-manage db sync /etc/init.d/cinder-api restart /etc/init.d/cinder-scheduler restart /etc/init.d/cinder-volume restart
最后，我们需要执行：
/etc/init.d/iscsitarget stop
具体请看这里
Nova
- 安装 nova-compute:
apt-get install nova-compute
在 /etc/nova/api-paste.ini 中修改 autotoken 验证部分：
[filter:authtoken] paste.filter_factory = keystoneclient.middleware.auth_token:filter_factory auth_host = 172.16.0.51 auth_port = 35357 auth_protocol = http admin_tenant_name = service admin_user = nova admin_password = password signing_dir = /tmp/keystone-signing-nova # Workaround for https://bugs.launchpad.net/nova/+bug/1154809 auth_version = v2.0
修改 /etc/nova/nova.conf，类似下面这样：
cat /etc/nova/nova.conf [DEFAULT] dhcpbridge_flagfile=/etc/nova/nova.conf dhcpbridge=/usr/bin/nova-dhcpbridge logdir=/var/log/nova state_path=/var/lib/nova lock_path=/var/lock/nova force_dhcp_release=True iscsi_helper=tgtadm #iscsi_helper = ietadm libvirt_use_virtio_for_bridges=True connection_type=libvirt root_helper=sudo nova-rootwrap /etc/nova/rootwrap.conf verbose=True ec2_private_dns_show_ip=True #api_paste_config=/etc/nova/api-paste.ini volumes_path=/var/lib/nova/volumes enabled_apis=ec2,osapi_compute,metadata # SCHEDULER compute_scheduler_driver = nova.scheduler.filter_scheduler.FilterScheduler ## VOLUMES volume_api_class = nova.volume.cinder.API osapi_volume_listen_port=5900 iscsi_ip_prefix=192.168.80 iscsi_ip_address=192.168.80.22 # DATABASE sql_connection = mysql://nova:[email protected]/nova # COMPUTE libvirt_type = kvm compute_driver = libvirt.LibvirtDriver instance_name_template = instance-%08x api_paste_config = /etc/nova/api-paste.ini # COMPUTE/APIS: if you have separate configs for separate services # this flag is required for both nova-api and nova-compute allow_resize_to_same_host = True # APIS osapi_compute_extension = nova.api.openstack.compute.contrib.standard_extensions ec2_dmz_host = 172.16.0.51 s3_host = 172.16.0.51 metadata_host=172.16.0.51 metadata_listen=0.0.0.0 # RABBITMQ rabbit_host = 172.16.0.51 rabbit_password = guest # GLANCE image_service = nova.image.glance.GlanceImageService glance_api_servers = 172.16.0.51:9292 # NETWORK network_api_class = nova.network.quantumv2.api.API quantum_url = http://172.16.0.51:9696 quantum_auth_strategy = keystone quantum_admin_tenant_name = service quantum_admin_username = quantum quantum_admin_password = password quantum_admin_auth_url = http://172.16.0.51:35357/v2.0 service_quantum_metadata_proxy = True libvirt_vif_driver = nova.virt.libvirt.vif.LibvirtHybridOVSBridgeDriver linuxnet_interface_driver = nova.network.linux_net.LinuxOVSInterfaceDriver firewall_driver = nova.virt.libvirt.firewall.IptablesFirewallDriver # NOVNC CONSOLE novncproxy_base_url = http://192.168.80.21:6080/vnc_auto.html # Change vncserver_proxyclient_address and vncserver_listen to match each compute host vncserver_proxyclient_address = 192.168.80.22 vncserver_listen = 192.168.80.22 # AUTHENTICATION auth_strategy = keystone [keystone_authtoken] auth_host = 172.16.0.51 auth_port = 35357 auth_protocol = http admin_tenant_name = service admin_user = nova admin_password = password signing_dir = /tmp/keystone-signing-nova
启动 nova-compute 服务：
service nova-compute restart
检查 nova 相关服务笑脸：
发现 compute 节点已经加入：
# nova-manage service list Binary Host Zone Status State Updated_At nova-cert control internal enabled :-) 2013-05-07 07:09:56 nova-conductor control internal enabled :-) 2013-05-07 07:09:55 nova-consoleauth control internal enabled :-) 2013-05-07 07:09:56 nova-scheduler control internal enabled :-) 2013-05-07 07:09:56 nova-compute node-02 nova enabled :-) 2013-05-07 07:10:03 nova-compute node-03 nova enabled :-) 2013-05-07 07:10:03
到这里，计算节点就成功加入了，我们可以尝试新建节点验证是否成功，具体horizon的使用方法，后面再写文章详细介绍，主要就是网络的创建这块稍微有点复杂，需要稍微注意下！