(OK) Fedora 23——CORE——docker——(6)——> install-docker-py-1.8.1

------------------------------------------------------------------------

docker-py 一定要安装正确，否则，CORE 中的 Docker 不能工作。

------------------------------------------------------------------------
[root@localhost core]# pip install docker-py
// After install docker-py, CORE is abnormal, so, uninstall it.

[root@localhost core]# pip uninstall docker-py

[root@localhost ~]# pip uninstall docker-py
You are using pip version 7.1.0, however version 8.1.1 is available.
You should consider upgrading via the 'pip install --upgrade pip' command.
Uninstalling docker-py-1.8.1:
  /usr/lib/python2.7/site-packages/docker/__init__.py
  /usr/lib/python2.7/site-packages/docker/__init__.pyc
......
  /usr/lib/python2.7/site-packages/docker_py-1.8.1.dist-info/metadata.json
  /usr/lib/python2.7/site-packages/docker_py-1.8.1.dist-info/top_level.txt
Proceed (y/n)?


----------------------------
用了一个星期的时间，排除了种种可能出错的原因，终于找到了错误根源
----------------------------
/usr/lib/python2.7/site-packages/core/services/dockersvc.py:    client = Client(version='1.10')
修改为
/usr/lib/python2.7/site-packages/core/services/dockersvc.py:    client = Client(version='1.12')
因为
# tail /var/log/core-daemon.log
APIError: 400 Client Error: Bad Request ("client version 1.10 is too old. Minimum supported API version is 1.12, please upgrade your client to a newer version")

------------------------------------------------------------------------






------------------------------------------------------------------------

install docker-py from source code

------------------------------------------------------------------------
docker-py-1.8.1.tar.gz

[root@localhost docker-py-master]# pwd
/opt/tools/network_simulators/core/docker-py-master

[root@localhost docker-py-master]# make
docker build -t docker-py .
Cannot connect to the Docker daemon. Is the docker daemon running on this host?
Makefile:11: recipe for target 'build' failed
make: *** [build] Error 1

[root@localhost docker-py-master]# systemctl start docker

[root@localhost docker-py-master]# make
docker build -t docker-py .
Sending build context to Docker daemon 545.8 kB
Step 1 : FROM python:2.7
2.7: Pulling from library/python
8b87079b7a06: Pull complete
a3ed95caeb02: Pull complete
1bb8eaf3d643: Pull complete
3e04171ce2e5: Pull complete
0b73d3fea769: Pull complete
167a085f33b1: Pull complete
4cfa46b1ae8d: Pull complete
3f20114205e3: Pull complete
Digest: sha256:f64fb8542811e16e34ba0882e5e65fb33b2347ada91b5502fbd7165ffafc5374
Status: Downloaded newer image for python:2.7
 ---> b7a3b567574d
Step 2 : MAINTAINER Joffrey F <[email protected]>
 ---> Running in 45a1642b8d9b
 ---> cd24e25ffe29
Removing intermediate container 45a1642b8d9b
Step 3 : RUN mkdir /home/docker-py
 ---> Running in 04afa9500130
 ---> 5191dc668be8
Removing intermediate container 04afa9500130
Step 4 : WORKDIR /home/docker-py
 ---> Running in 27ef48a22e12
 ---> 50bb71fb0351
Removing intermediate container 27ef48a22e12
Step 5 : COPY requirements.txt /home/docker-py/requirements.txt
 ---> 3355221f4e0f
Removing intermediate container 9de100c529b8
Step 6 : RUN pip install -r requirements.txt
 ---> Running in b585531023d7
Collecting requests==2.5.3 (from -r requirements.txt (line 1))
  Downloading requests-2.5.3-py2.py3-none-any.whl (468kB)
Collecting six>=1.4.0 (from -r requirements.txt (line 2))
  Downloading six-1.10.0-py2.py3-none-any.whl
Collecting websocket-client==0.32.0 (from -r requirements.txt (line 3))
  Downloading websocket_client-0.32.0.tar.gz (192kB)
Collecting backports.ssl-match-hostname>=3.5 (from -r requirements.txt (line 4))
  Downloading backports.ssl_match_hostname-3.5.0.1.tar.gz
Collecting ipaddress==1.0.16 (from -r requirements.txt (line 5))
  Downloading ipaddress-1.0.16-py27-none-any.whl
Building wheels for collected packages: websocket-client, backports.ssl-match-hostname
  Running setup.py bdist_wheel for websocket-client: started
  Running setup.py bdist_wheel for websocket-client: finished with status 'done'
  Stored in directory: /root/.cache/pip/wheels/a2/7a/d2/8e42a1d51fe2562c571f2a4859d975942254e92b1815d65ea2
  Running setup.py bdist_wheel for backports.ssl-match-hostname: started
  Running setup.py bdist_wheel for backports.ssl-match-hostname: finished with status 'done'
  Stored in directory: /root/.cache/pip/wheels/5d/72/36/b2a31507b613967b728edc33378a5ff2ada0f62855b93c5ae1
Successfully built websocket-client backports.ssl-match-hostname
Installing collected packages: requests, six, websocket-client, backports.ssl-match-hostname, ipaddress
Successfully installed backports.ssl-match-hostname-3.5.0.1 ipaddress-1.0.16 requests-2.5.3 six-1.10.0 websocket-client-0.32.0
 ---> db4da7c96db6
Removing intermediate container b585531023d7
Step 7 : COPY test-requirements.txt /home/docker-py/test-requirements.txt
 ---> 90d26c7aea93
Removing intermediate container cc62efa004e5
Step 8 : RUN pip install -r test-requirements.txt
 ---> Running in e64f00aa6dbc
Collecting mock==1.0.1 (from -r test-requirements.txt (line 1))
  Downloading mock-1.0.1.zip (861kB)
Collecting pytest==2.7.2 (from -r test-requirements.txt (line 2))
  Downloading pytest-2.7.2-py2.py3-none-any.whl (127kB)
Collecting coverage==3.7.1 (from -r test-requirements.txt (line 3))
  Downloading coverage-3.7.1.tar.gz (284kB)
Collecting pytest-cov==2.1.0 (from -r test-requirements.txt (line 4))
  Downloading pytest_cov-2.1.0-py2.py3-none-any.whl
Collecting flake8==2.4.1 (from -r test-requirements.txt (line 5))
  Downloading flake8-2.4.1-py2.py3-none-any.whl
Collecting py>=1.4.29 (from pytest==2.7.2->-r test-requirements.txt (line 2))
  Downloading py-1.4.31-py2.py3-none-any.whl (81kB)
Collecting pyflakes<0.9,>=0.8.1 (from flake8==2.4.1->-r test-requirements.txt (line 5))
  Downloading pyflakes-0.8.1-py2.py3-none-any.whl
Collecting pep8!=1.6.0,!=1.6.1,!=1.6.2,>=1.5.7 (from flake8==2.4.1->-r test-requirements.txt (line 5))
  Downloading pep8-1.7.0-py2.py3-none-any.whl (41kB)
Collecting mccabe<0.4,>=0.2.1 (from flake8==2.4.1->-r test-requirements.txt (line 5))
  Downloading mccabe-0.3.1-py2.py3-none-any.whl
Building wheels for collected packages: mock, coverage
  Running setup.py bdist_wheel for mock: started
  Running setup.py bdist_wheel for mock: finished with status 'done'
  Stored in directory: /root/.cache/pip/wheels/b2/f8/fe/920b7d3b279878045354cde14646f73864cf944501f19e4a1b
  Running setup.py bdist_wheel for coverage: started
  Running setup.py bdist_wheel for coverage: finished with status 'done'
  Stored in directory: /root/.cache/pip/wheels/09/d5/14/fad8864342631171117f01b9b2473a07c053e5c1054d40e48c
Successfully built mock coverage
Installing collected packages: mock, py, pytest, coverage, pytest-cov, pyflakes, pep8, mccabe, flake8
Successfully installed coverage-3.7.1 flake8-2.4.1 mccabe-0.3.1 mock-1.0.1 pep8-1.7.0 py-1.4.31 pyflakes-0.8.1 pytest-2.7.2 pytest-cov-2.1.0
 ---> ae9830513088
Removing intermediate container e64f00aa6dbc
Step 9 : COPY . /home/docker-py
 ---> 65d0f28fee0a
Removing intermediate container e75ec5878dff
Step 10 : RUN pip install .
 ---> Running in a6b74d043d77
Processing /home/docker-py
Requirement already satisfied (use --upgrade to upgrade): requests>=2.5.2 in /usr/local/lib/python2.7/site-packages (from docker-py==1.8.1)
Requirement already satisfied (use --upgrade to upgrade): six>=1.4.0 in /usr/local/lib/python2.7/site-packages (from docker-py==1.8.1)
Requirement already satisfied (use --upgrade to upgrade): websocket-client>=0.32.0 in /usr/local/lib/python2.7/site-packages (from docker-py==1.8.1)
Requirement already satisfied (use --upgrade to upgrade): ipaddress>=1.0.16 in /usr/local/lib/python2.7/site-packages (from docker-py==1.8.1)
Requirement already satisfied (use --upgrade to upgrade): backports.ssl-match-hostname>=3.5 in /usr/local/lib/python2.7/site-packages (from docker-py==1.8.1)
Building wheels for collected packages: docker-py
  Running setup.py bdist_wheel for docker-py: started
  Running setup.py bdist_wheel for docker-py: finished with status 'done'
  Stored in directory: /root/.cache/pip/wheels/5d/71/82/1f2418b60d8a6317cd16de415072db851bfc6bb4a09cd43b5e
Successfully built docker-py
Installing collected packages: docker-py
Successfully installed docker-py-1.8.1
 ---> 0ee1a200ab73
Removing intermediate container a6b74d043d77
Successfully built 0ee1a200ab73
docker run docker-py flake8 docker tests
docker run docker-py py.test tests/unit
============================= test session starts ==============================
platform linux2 -- Python 2.7.11 -- py-1.4.31 -- pytest-2.7.2
rootdir: /home/docker-py, inifile: pytest.ini
plugins: cov
collected 320 items

tests/unit/api_test.py ......................
tests/unit/auth_test.py .........................................
tests/unit/build_test.py .........
tests/unit/client_test.py .
tests/unit/container_test.py .............................................................................................
tests/unit/exec_test.py ....
tests/unit/image_test.py ........................
tests/unit/network_test.py ......
tests/unit/ssladapter_test.py ......
tests/unit/utils_test.py ...........................................................................................................
tests/unit/volume_test.py .......

========================== 320 passed in 0.93 seconds ==========================
docker build -t docker-py3 -f Dockerfile-py3 .
Sending build context to Docker daemon 545.8 kB
Step 1 : FROM python:3.4
3.4: Pulling from library/python
8b87079b7a06: Already exists
a3ed95caeb02: Pull complete
1bb8eaf3d643: Already exists
3e04171ce2e5: Already exists
0b73d3fea769: Already exists
167a085f33b1: Already exists
3eb51259e78a: Pull complete
73f79c88c6d5: Pull complete
Digest: sha256:d52f2a6a2a00cbe43fd24c6b7719aa2a49d19f3250e512852a81a5cb497bafa8
Status: Downloaded newer image for python:3.4
 ---> 8d55768a15a8
Step 2 : MAINTAINER Joffrey F <[email protected]>
 ---> Running in 43443377feec
 ---> 23b3468051d5
Removing intermediate container 43443377feec
Step 3 : RUN mkdir /home/docker-py
 ---> Running in afc8beaabe88
 ---> ef98ecfdcff1
Removing intermediate container afc8beaabe88
Step 4 : WORKDIR /home/docker-py
 ---> Running in 3d1438509e48
 ---> b79d64d395b7
Removing intermediate container 3d1438509e48
Step 5 : COPY requirements.txt /home/docker-py/requirements.txt
 ---> 600249173521
Removing intermediate container f899246f9d8d
Step 6 : RUN pip install -r requirements.txt
 ---> Running in 2460fee114e3
Ignoring ipaddress: markers "python_version < '3.3'" don't match your environment
Collecting requests==2.5.3 (from -r requirements.txt (line 1))
  Downloading requests-2.5.3-py2.py3-none-any.whl (468kB)
Collecting six>=1.4.0 (from -r requirements.txt (line 2))
  Downloading six-1.10.0-py2.py3-none-any.whl
Collecting websocket-client==0.32.0 (from -r requirements.txt (line 3))
  Downloading websocket_client-0.32.0.tar.gz (192kB)
Collecting backports.ssl-match-hostname>=3.5 (from -r requirements.txt (line 4))
  Downloading backports.ssl_match_hostname-3.5.0.1.tar.gz
Installing collected packages: requests, six, websocket-client, backports.ssl-match-hostname
  Running setup.py install for websocket-client: started
    Running setup.py install for websocket-client: finished with status 'done'
  Running setup.py install for backports.ssl-match-hostname: started
    Running setup.py install for backports.ssl-match-hostname: finished with status 'done'
Successfully installed backports.ssl-match-hostname-3.5.0.1 requests-2.5.3 six-1.10.0 websocket-client-0.32.0
 ---> a57874fcd6fc
Removing intermediate container 2460fee114e3
Step 7 : COPY test-requirements.txt /home/docker-py/test-requirements.txt
 ---> 0a40079ad860
Removing intermediate container 9b9724988a36
Step 8 : RUN pip install -r test-requirements.txt
 ---> Running in b6a948bb0be1
Collecting mock==1.0.1 (from -r test-requirements.txt (line 1))
  Downloading mock-1.0.1.zip (861kB)
Collecting pytest==2.7.2 (from -r test-requirements.txt (line 2))
  Downloading pytest-2.7.2-py2.py3-none-any.whl (127kB)
Collecting coverage==3.7.1 (from -r test-requirements.txt (line 3))
  Downloading coverage-3.7.1.tar.gz (284kB)
Collecting pytest-cov==2.1.0 (from -r test-requirements.txt (line 4))
  Downloading pytest_cov-2.1.0-py2.py3-none-any.whl
Collecting flake8==2.4.1 (from -r test-requirements.txt (line 5))
  Downloading flake8-2.4.1-py2.py3-none-any.whl
Collecting py>=1.4.29 (from pytest==2.7.2->-r test-requirements.txt (line 2))
  Downloading py-1.4.31-py2.py3-none-any.whl (81kB)
Collecting pyflakes<0.9,>=0.8.1 (from flake8==2.4.1->-r test-requirements.txt (line 5))
  Downloading pyflakes-0.8.1-py2.py3-none-any.whl
Collecting mccabe<0.4,>=0.2.1 (from flake8==2.4.1->-r test-requirements.txt (line 5))
  Downloading mccabe-0.3.1-py2.py3-none-any.whl
Collecting pep8!=1.6.0,!=1.6.1,!=1.6.2,>=1.5.7 (from flake8==2.4.1->-r test-requirements.txt (line 5))
  Downloading pep8-1.7.0-py2.py3-none-any.whl (41kB)
Installing collected packages: mock, py, pytest, coverage, pytest-cov, pyflakes, mccabe, pep8, flake8
  Running setup.py install for mock: started
    Running setup.py install for mock: finished with status 'done'
  Running setup.py install for coverage: started
    Running setup.py install for coverage: finished with status 'done'
Successfully installed coverage-3.7.1 flake8-2.4.1 mccabe-0.3.1 mock-1.0.1 pep8-1.7.0 py-1.4.31 pyflakes-0.8.1 pytest-2.7.2 pytest-cov-2.1.0
 ---> f12f34788bfa
Removing intermediate container b6a948bb0be1
Step 9 : COPY . /home/docker-py
 ---> 20f9f0f3b8a0
Removing intermediate container 3be368f17f54
Step 10 : RUN pip install .
 ---> Running in 7c830a4bb463
Processing /home/docker-py
Requirement already satisfied (use --upgrade to upgrade): requests>=2.5.2 in /usr/local/lib/python3.4/site-packages (from docker-py==1.8.1)
Requirement already satisfied (use --upgrade to upgrade): six>=1.4.0 in /usr/local/lib/python3.4/site-packages (from docker-py==1.8.1)
Requirement already satisfied (use --upgrade to upgrade): websocket-client>=0.32.0 in /usr/local/lib/python3.4/site-packages (from docker-py==1.8.1)
Requirement already satisfied (use --upgrade to upgrade): backports.ssl-match-hostname>=3.5 in /usr/local/lib/python3.4/site-packages (from docker-py==1.8.1)
Installing collected packages: docker-py
  Running setup.py install for docker-py: started
    Running setup.py install for docker-py: finished with status 'done'
Successfully installed docker-py-1.8.1
 ---> 4c15d2829d74
Removing intermediate container 7c830a4bb463
Successfully built 4c15d2829d74
docker run docker-py3 py.test tests/unit
============================= test session starts ==============================
platform linux -- Python 3.4.4 -- py-1.4.31 -- pytest-2.7.2
rootdir: /home/docker-py, inifile: pytest.ini
plugins: cov
collected 320 items

tests/unit/api_test.py ......................
tests/unit/auth_test.py .........................................
tests/unit/build_test.py .........
tests/unit/client_test.py .
tests/unit/container_test.py .............................................................................................
tests/unit/exec_test.py ....
tests/unit/image_test.py ........................
tests/unit/network_test.py ......
tests/unit/ssladapter_test.py ......
tests/unit/utils_test.py ..........................................................s................................................
tests/unit/volume_test.py .......
=========================== short test summary info ============================
SKIP [1] tests/unit/utils_test.py:622: shlex doesn't support bytes in py3

==================== 319 passed, 1 skipped in 1.43 seconds =====================
docker rm -vf dpy-dind || :
Error response from daemon: No such container: dpy-dind
docker run -d --name dpy-dind --privileged dockerswarm/dind:1.10.3 docker daemon -H tcp://0.0.0.0:2375
Unable to find image 'dockerswarm/dind:1.10.3' locally
1.10.3: Pulling from dockerswarm/dind
fdd5d7827f33: Pull complete
a3ed95caeb02: Pull complete
d5a3951459f4: Pull complete
5816775da3cb: Pull complete
d354b3d49d13: Pull complete
a75bc473e45f: Pull complete
Digest: sha256:bfba089821e0f4e1e8770c5122ac7060ac15c1bcfe0c999bd0ab640d116c3740
Status: Downloaded newer image for dockerswarm/dind:1.10.3
c52e5d6d7a34ca6791571710eadd1856001cbda13fd37a032085b7b1324932ae
docker run --env="DOCKER_HOST=tcp://docker:2375" --link=dpy-dind:docker docker-py py.test tests/integration
============================= test session starts ==============================
platform linux2 -- Python 2.7.11 -- py-1.4.31 -- pytest-2.7.2
rootdir: /home/docker-py, inifile: pytest.ini
plugins: cov
collected 116 items

tests/integration/api_test.py ..........
tests/integration/build_test.py .......
tests/integration/container_test.py ......................................................
tests/integration/exec_test.py .......
tests/integration/image_test.py ..........s
tests/integration/network_test.py ..............
tests/integration/regression_test.py ......
tests/integration/volume_test.py .......
=========================== short test summary info ============================
SKIP [1] tests/integration/image_test.py:230: Doesn't work inside a container - FIXME

=================== 115 passed, 1 skipped in 666.88 seconds ====================
docker run --env="DOCKER_HOST=tcp://docker:2375" --link=dpy-dind:docker docker-py3 py.test tests/integration
============================= test session starts ==============================
platform linux -- Python 3.4.4 -- py-1.4.31 -- pytest-2.7.2
rootdir: /home/docker-py, inifile: pytest.ini
plugins: cov
collected 116 items

tests/integration/api_test.py ..........
tests/integration/build_test.py .......
tests/integration/container_test.py ......................................................
tests/integration/exec_test.py .......
tests/integration/image_test.py ..........s
tests/integration/network_test.py ..............
tests/integration/regression_test.py ......
tests/integration/volume_test.py .......
=========================== short test summary info ============================
SKIP [1] tests/integration/image_test.py:230: Doesn't work inside a container - FIXME

=================== 115 passed, 1 skipped in 562.83 seconds ====================
docker rm -vf dpy-dind
dpy-dind
docker build -t dpy-dind-certs -f tests/Dockerfile-dind-certs .
Sending build context to Docker daemon 545.8 kB
Step 1 : FROM python:2.7
 ---> b7a3b567574d
Step 2 : RUN mkdir /tmp/certs
 ---> Running in 5e85a8e9a975
 ---> a1fecc49dada
Removing intermediate container 5e85a8e9a975
Step 3 : VOLUME /certs
 ---> Running in 2526771e3f87
 ---> 819cde6e34ef
Removing intermediate container 2526771e3f87
Step 4 : WORKDIR /tmp/certs
 ---> Running in 23fd5815abed
 ---> b44feb2c0762
Removing intermediate container 23fd5815abed
Step 5 : RUN openssl genrsa -aes256 -passout pass:foobar -out ca-key.pem 4096
 ---> Running in a6f66fd0e4c6
Generating RSA private key, 4096 bit long modulus
..............++
.....++
e is 65537 (0x10001)
 ---> fb8159fd9e9b
Removing intermediate container a6f66fd0e4c6
Step 6 : RUN echo "[req]\nprompt=no\ndistinguished_name = req_distinguished_name\n[req_distinguished_name]\ncountryName=AU" > /tmp/config
 ---> Running in 8e9d30f5f409
 ---> 3261f82aa690
Removing intermediate container 8e9d30f5f409
Step 7 : RUN openssl req -new -x509 -passin pass:foobar -config /tmp/config -days 365 -key ca-key.pem -sha256 -out ca.pem
 ---> Running in 987e87c3fd1c
 ---> ca4482779a99
Removing intermediate container 987e87c3fd1c
Step 8 : RUN openssl genrsa -out server-key.pem -passout pass:foobar 4096
 ---> Running in b07f6ff5c99f
Generating RSA private key, 4096 bit long modulus
................................++
..........................................................++
e is 65537 (0x10001)
 ---> 681f28fc6eea
Removing intermediate container b07f6ff5c99f
Step 9 : RUN openssl req -subj "/CN=docker" -sha256 -new -key server-key.pem -out server.csr
 ---> Running in 86671bdc82af
 ---> c425271ea0ee
Removing intermediate container 86671bdc82af
Step 10 : RUN echo subjectAltName = DNS:docker,DNS:localhost > extfile.cnf
 ---> Running in 5630b7f25fe3
 ---> 9d955a05b1d0
Removing intermediate container 5630b7f25fe3
Step 11 : RUN openssl x509 -req -days 365 -passin pass:foobar -sha256 -in server.csr -CA ca.pem -CAkey ca-key.pem -CAcreateserial -out server-cert.pem -extfile extfile.cnf
 ---> Running in 99f858595366
Signature ok
subject=/CN=docker
Getting CA Private Key
 ---> e94026fd19f7
Removing intermediate container 99f858595366
Step 12 : RUN openssl genrsa -out key.pem 4096
 ---> Running in 0e81cf4ff56d
Generating RSA private key, 4096 bit long modulus
............................++
..........................++
e is 65537 (0x10001)
 ---> 60fd430fe445
Removing intermediate container 0e81cf4ff56d
Step 13 : RUN openssl req -passin pass:foobar -subj '/CN=client' -new -key key.pem -out client.csr
 ---> Running in 3d44b533b9ea
 ---> 7efd977b18dc
Removing intermediate container 3d44b533b9ea
Step 14 : RUN echo extendedKeyUsage = clientAuth > extfile.cnf
 ---> Running in 7babf8614ecd
 ---> c1a82b1229a8
Removing intermediate container 7babf8614ecd
Step 15 : RUN openssl x509 -req -passin pass:foobar -days 365 -sha256 -in client.csr -CA ca.pem -CAkey ca-key.pem -CAcreateserial -out cert.pem -extfile extfile.cnf
 ---> Running in 13d797e5963f
Signature ok
subject=/CN=client
Getting CA Private Key
 ---> bf6e908e7f6a
Removing intermediate container 13d797e5963f
Step 16 : RUN chmod -v 0400 ca-key.pem key.pem server-key.pem
 ---> Running in fd9fac76b89b
mode of ‘ca-key.pem’ changed from 0644 (rw-r--r--) to 0400 (r--------)
mode of ‘key.pem’ changed from 0644 (rw-r--r--) to 0400 (r--------)
mode of ‘server-key.pem’ changed from 0644 (rw-r--r--) to 0400 (r--------)
 ---> 8c0b07f00986
Removing intermediate container fd9fac76b89b
Step 17 : RUN chmod -v 0444 ca.pem server-cert.pem cert.pem
 ---> Running in 8f6ba41282b3
mode of ‘ca.pem’ changed from 0644 (rw-r--r--) to 0444 (r--r--r--)
mode of ‘server-cert.pem’ changed from 0644 (rw-r--r--) to 0444 (r--r--r--)
mode of ‘cert.pem’ changed from 0644 (rw-r--r--) to 0444 (r--r--r--)
 ---> cd6d8f5ab6da
Removing intermediate container 8f6ba41282b3
Step 18 : CMD cp -R /tmp/certs/* /certs && while true; do sleep 1; done
 ---> Running in 1fc43874914e
 ---> 73b931840fd1
Removing intermediate container 1fc43874914e
Successfully built 73b931840fd1
docker run -d --name dpy-dind-certs dpy-dind-certs
b7954b8f2a4c0e6490f53dcd35c11a0f57919c87e44385631508d4bd5a2d4661
docker run -d --env="DOCKER_HOST=tcp://localhost:2375" --env="DOCKER_TLS_VERIFY=1" --env="DOCKER_CERT_PATH=/certs" --volumes-from dpy-dind-certs --name dpy-dind-ssl -v /tmp --privileged dockerswarm/dind:1.10.3 docker daemon --tlsverify --tlscacert=/certs/ca.pem --tlscert=/certs/server-cert.pem --tlskey=/certs/server-key.pem -H tcp://0.0.0.0:2375
7541ce1698c7d7134d7df11510966f60328590a19515780567cafe7d33a8e02f
docker run --volumes-from dpy-dind-ssl --env="DOCKER_HOST=tcp://docker:2375" --env="DOCKER_TLS_VERIFY=1" --env="DOCKER_CERT_PATH=/certs" --link=dpy-dind-ssl:docker docker-py py.test tests/integration
docker: Error response from daemon: Cannot link to a non running container: /dpy-dind-ssl AS /gigantic_hamilton/docker.
Makefile:41: recipe for target 'integration-dind-ssl' failed
make: *** [integration-dind-ssl] Error 125
[root@localhost docker-py-master]#








+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

[root@localhost docker-py-master]# pip install docker-py
You are using pip version 7.1.0, however version 8.1.1 is available.
You should consider upgrading via the 'pip install --upgrade pip' command.
Collecting docker-py
  Using cached docker_py-1.8.1-py2.py3-none-any.whl
Requirement already satisfied (use --upgrade to upgrade): backports.ssl-match-hostname>=3.5 in /usr/lib/python2.7/site-packages (from docker-py)
Requirement already satisfied (use --upgrade to upgrade): ipaddress>=1.0.16 in /usr/lib/python2.7/site-packages (from docker-py)
Requirement already satisfied (use --upgrade to upgrade): requests>=2.5.2 in /usr/lib/python2.7/site-packages (from docker-py)
Requirement already satisfied (use --upgrade to upgrade): six>=1.4.0 in /usr/lib/python2.7/site-packages (from docker-py)
Requirement already satisfied (use --upgrade to upgrade): websocket-client>=0.32.0 in /usr/lib/python2.7/site-packages (from docker-py)
Requirement already satisfied (use --upgrade to upgrade): urllib3==1.15.1 in /usr/lib/python2.7/site-packages (from requests>=2.5.2->docker-py)
Installing collected packages: docker-py
Successfully installed docker-py-1.8.1
[root@localhost docker-py-master]# pip freeze | grep docker-py
You are using pip version 7.1.0, however version 8.1.1 is available.
You should consider upgrading via the 'pip install --upgrade pip' command.
docker-py==1.8.1
[root@localhost docker-py-master]# pip freeze | grep docker-py && python --version && docker version
You are using pip version 7.1.0, however version 8.1.1 is available.
You should consider upgrading via the 'pip install --upgrade pip' command.
docker-py==1.8.1
Python 2.7.11
Client:
 Version:      1.11.1
 API version:  1.23
 Go version:   go1.5.4
 Git commit:   5604cbe
 Built:        Wed Apr 27 00:57:43 2016
 OS/Arch:      linux/amd64

Server:
 Version:      1.11.1
 API version:  1.23
 Go version:   go1.5.4
 Git commit:   5604cbe
 Built:        Wed Apr 27 00:57:43 2016
 OS/Arch:      linux/amd64
[root@localhost docker-py-master]#