Nagios太阳（pnp）安装配置

一．安装rrdtool

RRDTOOL将nagios采集的数据绘制成图表。

#wget http://oss.oetiker.ch/rrdtool/pub/rrdtool-1.4.3.tar.gz

#tar zxvf rrdtool-1.4.3.tar.gz -C ../software

#cd ../softwar/rrdtool-1.4.3

#./configure

--prefix=/usr/local/rrdtool/

--with-perl-options=/usr/bin/perl 指定perl路径

#make

#make install

二．安装pnp

#wget http://downloads.sourceforge.net/project/pnp4nagios/PNP/pnp-0.4.14/pnp-0.4.14.tar.gz?use_mirror=nchc

#tar zxvf pnp-0.4.14.tar.gz -C ../software/

#cd ../software/pnp-0.4.14

#./configure /

--with-nagios-user=nagios/

--with-nagios-group=nagios/

--with-rrdtool=/usr/local/rrdtool/bin/rrdtool/ 指定rrdtool路径

--with-perfdata-dir=/usr/local/nagios/share/perfdata/ 指定perfdata存放路径

General Options:

------------------------- -------------------

Nagios user/group: nagios nagios

Install directory: /usr/local/nagios

HTML Dir: /usr/local/nagios/share/pnp

Config Dir: /usr/local/nagios/etc/pnp

Location of rrdtool binary: /usr/local/rrdtool/bin/rrdtool Version 1.4.3

RRDs Perl Modules: FOUND (Version 1.4003)

RRD Files stored in: /usr/local/nagios/share/perfdata/

process_perfdata.pl Logfile: /usr/local/nagios/var/perfdata.log

Perfdata files (NPCD) stored in: /usr/local/nagios/var/spool/perfdata/

#make all

#make install

#make install-config

#make install-init

三．配置nagios

#vi /usr/local/nagios/etc/nagios (在880行左右)

process_performance_data=1 //开启收集perfdata（默认是关闭的）

host_perfdata_command=process-host-perfdata

service_perfdata_command=process-service-perfdata

#vi /usr/local/nagios/etc/objects/commands.cfg

增加对process-host-perfdata，process-service-perfdata命令的定义

define command{

command_name process-service-perfdata //定义命令名称

command_line /usr/local/nagios/libexec/process_perfdata.pl //指定命名

}

define command{

command_name process-service-perfdata

command_line /usr/local/nagios/libexec/process_perfdata.pl

}

# vi /usr/local/nagios/etc/objects/templates.cfg

添加太阳图标，配置前端页面

define service{

name generic-service

process_perf_data 1 //开启收集perfdata

action_url /nagios/pnp/index.php?host=$HOSTNAME$&srv=$SERVICEDESC$ //定义URL

}

define service{

name local-service

use generic-service

action_url /nagios/pnp/index.php?host=$HOSTNAME$

process_perf_data 1

}

# /usr/local/nagios/bin/nagios -v /usr/local/nagios/etc/nagios.cfg 检测配置

#service nagios restart

四．验证

http://localhost/nagios/pnp/

参考资料：http://docs.pnp4nagios.org/pnp-0.4/start