sqlhelper for sql

 using System; using System.Data; using System.Xml; using System.Data.SqlClient; using System.Collections; using System.Configuration; namespace Microsoft.ApplicationBlocks.Data2 { public sealed class SqlHelperr { public static readonly string Conn = ConfigurationManager.AppSettings["cnn"]; #region private utility methods & constructors private static void AttachParameters(SqlCommand command, SqlParameter[] commandParameters) { if (command == null) throw new ArgumentNullException("command"); if (commandParameters != null) { foreach (SqlParameter p in commandParameters) { if (p != null) { // Check for derived output value with no value assigned if ((p.Direction == ParameterDirection.InputOutput || p.Direction == ParameterDirection.Input) && (p.Value == null)) { p.Value = DBNull.Value; } command.Parameters.Add(p); } } } } private static void AssignParameterValues(SqlParameter[] commandParameters, DataRow dataRow) { if ((commandParameters == null) || (dataRow == null)) { // Do nothing if we get no data return; } int i = 0; // Set the parameters values foreach (SqlParameter commandParameter in commandParameters) { // Check the parameter name if (commandParameter.ParameterName == null || commandParameter.ParameterName.Length <= 1) throw new Exception( string.Format( "Please provide a valid parameter name on the parameter #{0}, the ParameterName property has the following value: '{1}'.", i, commandParameter.ParameterName)); if (dataRow.Table.Columns.IndexOf(commandParameter.ParameterName.Substring(1)) != -1) commandParameter.Value = dataRow[commandParameter.ParameterName.Substring(1)]; i++; } } private static void AssignParameterValues(SqlParameter[] commandParameters, object[] parameterValues) { if ((commandParameters == null) || (parameterValues == null)) { // Do nothing if we get no data return; } // We must have the same number of values as we pave parameters to put them in if (commandParameters.Length != parameterValues.Length) { throw new ArgumentException("Parameter count does not match Parameter Value count."); } // Iterate through the SqlParameters, assigning the values from the corresponding position in the // value array for (int i = 0, j = commandParameters.Length; i < j; i++) { // If the current array value derives from IDbDataParameter, then assign its Value property if (parameterValues[i] is IDbDataParameter) { IDbDataParameter paramInstance = (IDbDataParameter)parameterValues[i]; if (paramInstance.Value == null) { commandParameters[i].Value = DBNull.Value; } else { commandParameters[i].Value = paramInstance.Value; } } else if (parameterValues[i] == null) { commandParameters[i].Value = DBNull.Value; } else { commandParameters[i].Value = parameterValues[i]; } } } private static void PrepareCommand(SqlCommand command, SqlConnection connection, SqlTransaction transaction, CommandType commandType, string commandText, SqlParameter[] commandParameters, out bool mustCloseConnection) { if (command == null) throw new ArgumentNullException("command"); if (commandText == null || commandText.Length == 0) throw new ArgumentNullException("commandText"); // If the provided connection is not open, we will open it if (connection.State != ConnectionState.Open) { mustCloseConnection = true; connection.Open(); } else { mustCloseConnection = false; } // Associate the connection with the command command.Connection = connection; // Set the command text (stored procedure name or SQL statement) command.CommandText = commandText; // If we were provided a transaction, assign it if (transaction != null) { if (transaction.Connection == null) throw new ArgumentException("The transaction was rollbacked or commited, please provide an open transaction.", "transaction"); command.Transaction = transaction; } // Set the command type command.CommandType = commandType; // Attach the command parameters if they are provided if (commandParameters != null) { AttachParameters(command, commandParameters); } return; } #endregion private utility methods & constructors #region ExecuteNonQuery public static int ExecuteNonQuery(string connectionString, CommandType commandType, string commandText) { // Pass through the call providing null for the set of SqlParameters return ExecuteNonQuery(connectionString, commandType, commandText, (SqlParameter[])null); } public static int ExecuteNonQuery(string connectionString, CommandType commandType, string commandText, params SqlParameter[] commandParameters) { if (connectionString == null || connectionString.Length == 0) throw new ArgumentNullException("connectionString"); // Create & open a SqlConnection, and dispose of it after we are done using (SqlConnection connection = new SqlConnection(connectionString)) { connection.Open(); // Call the overload that takes a connection in place of the connection string return ExecuteNonQuery(connection, commandType, commandText, commandParameters); } } public static int ExecuteNonQuery(string connectionString, string spName, params object[] parameterValues) { if (connectionString == null || connectionString.Length == 0) throw new ArgumentNullException("connectionString"); if (spName == null || spName.Length == 0) throw new ArgumentNullException("spName"); // If we receive parameter values, we need to figure out where they go if ((parameterValues != null) && (parameterValues.Length > 0)) { // Pull the parameters for this stored procedure from the parameter cache (or discover them & populate the cache) SqlParameter[] commandParameters = SqlHelperParameterCache.GetSpParameterSet(connectionString, spName); // Assign the provided values to these parameters based on parameter order AssignParameterValues(commandParameters, parameterValues); // Call the overload that takes an array of SqlParameters return ExecuteNonQuery(connectionString, CommandType.StoredProcedure, spName, commandParameters); } else { // Otherwise we can just call the SP without params return ExecuteNonQuery(connectionString, CommandType.StoredProcedure, spName); } } public static int ExecuteNonQuery(SqlConnection connection, CommandType commandType, string commandText) { // Pass through the call providing null for the set of SqlParameters return ExecuteNonQuery(connection, commandType, commandText, (SqlParameter[])null); } public static int ExecuteNonQuery(SqlConnection connection, CommandType commandType, string commandText, params SqlParameter[] commandParameters) { if (connection == null) throw new ArgumentNullException("connection"); // Create a command and prepare it for execution SqlCommand cmd = new SqlCommand(); bool mustCloseConnection = false; PrepareCommand(cmd, connection, (SqlTransaction)null, commandType, commandText, commandParameters, out mustCloseConnection); // Finally, execute the command int retval = cmd.ExecuteNonQuery(); // Detach the SqlParameters from the command object, so they can be used again cmd.Parameters.Clear(); if (mustCloseConnection) connection.Close(); return retval; } public static int ExecuteNonQuery(SqlConnection connection, string spName, params object[] parameterValues) { if (connection == null) throw new ArgumentNullException("connection"); if (spName == null || spName.Length == 0) throw new ArgumentNullException("spName"); // If we receive parameter values, we need to figure out where they go if ((parameterValues != null) && (parameterValues.Length > 0)) { // Pull the parameters for this stored procedure from the parameter cache (or discover them & populate the cache) SqlParameter[] commandParameters = SqlHelperParameterCache.GetSpParameterSet(connection, spName); // Assign the provided values to these parameters based on parameter order AssignParameterValues(commandParameters, parameterValues); // Call the overload that takes an array of SqlParameters return ExecuteNonQuery(connection, CommandType.StoredProcedure, spName, commandParameters); } else { // Otherwise we can just call the SP without params return ExecuteNonQuery(connection, CommandType.StoredProcedure, spName); } } public static int ExecuteNonQuery(SqlTransaction transaction, CommandType commandType, string commandText) { // Pass through the call providing null for the set of SqlParameters return ExecuteNonQuery(transaction, commandType, commandText, (SqlParameter[])null); } public static int ExecuteNonQuery(SqlTransaction transaction, CommandType commandType, string commandText, params SqlParameter[] commandParameters) { if (transaction == null) throw new ArgumentNullException("transaction"); if (transaction != null && transaction.Connection == null) throw new ArgumentException("The transaction was rollbacked or commited, please provide an open transaction.", "transaction"); // Create a command and prepare it for execution SqlCommand cmd = new SqlCommand(); bool mustCloseConnection = false; PrepareCommand(cmd, transaction.Connection, transaction, commandType, commandText, commandParameters, out mustCloseConnection); // Finally, execute the command int retval = cmd.ExecuteNonQuery(); // Detach the SqlParameters from the command object, so they can be used again cmd.Parameters.Clear(); return retval; } public static int ExecuteNonQuery(SqlTransaction transaction, string spName, params object[] parameterValues) { if (transaction == null) throw new ArgumentNullException("transaction"); if (transaction != null && transaction.Connection == null) throw new ArgumentException("The transaction was rollbacked or commited, please provide an open transaction.", "transaction"); if (spName == null || spName.Length == 0) throw new ArgumentNullException("spName"); // If we receive parameter values, we need to figure out where they go if ((parameterValues != null) && (parameterValues.Length > 0)) { // Pull the parameters for this stored procedure from the parameter cache (or discover them & populate the cache) SqlParameter[] commandParameters = SqlHelperParameterCache.GetSpParameterSet(transaction.Connection, spName); // Assign the provided values to these parameters based on parameter order AssignParameterValues(commandParameters, parameterValues); // Call the overload that takes an array of SqlParameters return ExecuteNonQuery(transaction, CommandType.StoredProcedure, spName, commandParameters); } else { // Otherwise we can just call the SP without params return ExecuteNonQuery(transaction, CommandType.StoredProcedure, spName); } } #endregion ExecuteNonQuery #region ExecuteDataset public static DataSet ExecuteDataset(string connectionString, CommandType commandType, string commandText) { // Pass through the call providing null for the set of SqlParameters return ExecuteDataset(connectionString, commandType, commandText, (SqlParameter[])null); } public static DataSet ExecuteDataset(string connectionString, CommandType commandType, string commandText, params SqlParameter[] commandParameters) { if (connectionString == null || connectionString.Length == 0) throw new ArgumentNullException("connectionString"); // Create & open a SqlConnection, and dispose of it after we are done using (SqlConnection connection = new SqlConnection(connectionString)) { connection.Open(); // Call the overload that takes a connection in place of the connection string return ExecuteDataset(connection, commandType, commandText, commandParameters); } } public static DataSet ExecuteDataset(string connectionString, string spName, params object[] parameterValues) { if (connectionString == null || connectionString.Length == 0) throw new ArgumentNullException("connectionString"); if (spName == null || spName.Length == 0) throw new ArgumentNullException("spName"); // If we receive parameter values, we need to figure out where they go if ((parameterValues != null) && (parameterValues.Length > 0)) { // Pull the parameters for this stored procedure from the parameter cache (or discover them & populate the cache) SqlParameter[] commandParameters = SqlHelperParameterCache.GetSpParameterSet(connectionString, spName); // Assign the provided values to these parameters based on parameter order AssignParameterValues(commandParameters, parameterValues); // Call the overload that takes an array of SqlParameters return ExecuteDataset(connectionString, CommandType.StoredProcedure, spName, commandParameters); } else { // Otherwise we can just call the SP without params return ExecuteDataset(connectionString, CommandType.StoredProcedure, spName); } } public static DataSet ExecuteDataset(SqlConnection connection, CommandType commandType, string commandText) { // Pass through the call providing null for the set of SqlParameters return ExecuteDataset(connection, commandType, commandText, (SqlParameter[])null); } public static DataSet ExecuteDataset(SqlConnection connection, CommandType commandType, string commandText, params SqlParameter[] commandParameters) { if (connection == null) throw new ArgumentNullException("connection"); // Create a command and prepare it for execution SqlCommand cmd = new SqlCommand(); bool mustCloseConnection = false; PrepareCommand(cmd, connection, (SqlTransaction)null, commandType, commandText, commandParameters, out mustCloseConnection); // Create the DataAdapter & DataSet using (SqlDataAdapter da = new SqlDataAdapter(cmd)) { DataSet ds = new DataSet(); // Fill the DataSet using default values for DataTable names, etc da.Fill(ds); // Detach the SqlParameters from the command object, so they can be used again cmd.Parameters.Clear(); if (mustCloseConnection) connection.Close(); // Return the dataset return ds; } } public static DataSet ExecuteDataset(SqlConnection connection, string spName, params object[] parameterValues) { if (connection == null) throw new ArgumentNullException("connection"); if (spName == null || spName.Length == 0) throw new ArgumentNullException("spName"); // If we receive parameter values, we need to figure out where they go if ((parameterValues != null) && (parameterValues.Length > 0)) { // Pull the parameters for this stored procedure from the parameter cache (or discover them & populate the cache) SqlParameter[] commandParameters = SqlHelperParameterCache.GetSpParameterSet(connection, spName); // Assign the provided values to these parameters based on parameter order AssignParameterValues(commandParameters, parameterValues); // Call the overload that takes an array of SqlParameters return ExecuteDataset(connection, CommandType.StoredProcedure, spName, commandParameters); } else { // Otherwise we can just call the SP without params return ExecuteDataset(connection, CommandType.StoredProcedure, spName); } } public static DataSet ExecuteDataset(SqlTransaction transaction, CommandType commandType, string commandText) { // Pass through the call providing null for the set of SqlParameters return ExecuteDataset(transaction, commandType, commandText, (SqlParameter[])null); } public static DataSet ExecuteDataset(SqlTransaction transaction, CommandType commandType, string commandText, params SqlParameter[] commandParameters) { if (transaction == null) throw new ArgumentNullException("transaction"); if (transaction != null && transaction.Connection == null) throw new ArgumentException("The transaction was rollbacked or commited, please provide an open transaction.", "transaction"); // Create a command and prepare it for execution SqlCommand cmd = new SqlCommand(); bool mustCloseConnection = false; PrepareCommand(cmd, transaction.Connection, transaction, commandType, commandText, commandParameters, out mustCloseConnection); // Create the DataAdapter & DataSet using (SqlDataAdapter da = new SqlDataAdapter(cmd)) { DataSet ds = new DataSet(); // Fill the DataSet using default values for DataTable names, etc da.Fill(ds); // Detach the SqlParameters from the command object, so they can be used again cmd.Parameters.Clear(); // Return the dataset return ds; } } public static DataSet ExecuteDataset(SqlTransaction transaction, string spName, params object[] parameterValues) { if (transaction == null) throw new ArgumentNullException("transaction"); if (transaction != null && transaction.Connection == null) throw new ArgumentException("The transaction was rollbacked or commited, please provide an open transaction.", "transaction"); if (spName == null || spName.Length == 0) throw new ArgumentNullException("spName"); // If we receive parameter values, we need to figure out where they go if ((parameterValues != null) && (parameterValues.Length > 0)) { // Pull the parameters for this stored procedure from the parameter cache (or discover them & populate the cache) SqlParameter[] commandParameters = SqlHelperParameterCache.GetSpParameterSet(transaction.Connection, spName); // Assign the provided values to these parameters based on parameter order AssignParameterValues(commandParameters, parameterValues); // Call the overload that takes an array of SqlParameters return ExecuteDataset(transaction, CommandType.StoredProcedure, spName, commandParameters); } else { // Otherwise we can just call the SP without params return ExecuteDataset(transaction, CommandType.StoredProcedure, spName); } } #endregion ExecuteDataset #region ExecuteReader /// <summary> /// This enum is used to indicate whether the connection was provided by the caller, or created by SqlHelperr, so that /// we can set the appropriate CommandBehavior when calling ExecuteReader() /// </summary> private enum SqlConnectionOwnership { /// <summary>Connection is owned and managed by SqlHelperr</summary> Internal, /// <summary>Connection is owned and managed by the caller</summary> External } private static SqlDataReader ExecuteReader(SqlConnection connection, SqlTransaction transaction, CommandType commandType, string commandText, SqlParameter[] commandParameters, SqlConnectionOwnership connectionOwnership) { if (connection == null) throw new ArgumentNullException("connection"); bool mustCloseConnection = false; // Create a command and prepare it for execution SqlCommand cmd = new SqlCommand(); try { PrepareCommand(cmd, connection, transaction, commandType, commandText, commandParameters, out mustCloseConnection); // Create a reader SqlDataReader dataReader; // Call ExecuteReader with the appropriate CommandBehavior if (connectionOwnership == SqlConnectionOwnership.External) { dataReader = cmd.ExecuteReader(); } else { dataReader = cmd.ExecuteReader(CommandBehavior.CloseConnection); } bool canClear = true; foreach (SqlParameter commandParameter in cmd.Parameters) { if (commandParameter.Direction != ParameterDirection.Input) canClear = false; } if (canClear) { cmd.Parameters.Clear(); } return dataReader; } catch { if (mustCloseConnection) connection.Close(); throw; } } public static SqlDataReader ExecuteReader(string connectionString, CommandType commandType, string commandText) { // Pass through the call providing null for the set of SqlParameters return ExecuteReader(connectionString, commandType, commandText, (SqlParameter[])null); } public static SqlDataReader ExecuteReader(string connectionString, CommandType commandType, string commandText, params SqlParameter[] commandParameters) { if (connectionString == null || connectionString.Length == 0) throw new ArgumentNullException("connectionString"); SqlConnection connection = null; try { connection = new SqlConnection(connectionString); connection.Open(); // Call the private overload that takes an internally owned connection in place of the connection string return ExecuteReader(connection, null, commandType, commandText, commandParameters, SqlConnectionOwnership.Internal); } catch { // If we fail to return the SqlDatReader, we need to close the connection ourselves if (connection != null) connection.Close(); throw; } } public static SqlDataReader ExecuteReader(string connectionString, string spName, params object[] parameterValues) { if (connectionString == null || connectionString.Length == 0) throw new ArgumentNullException("connectionString"); if (spName == null || spName.Length == 0) throw new ArgumentNullException("spName"); // If we receive parameter values, we need to figure out where they go if ((parameterValues != null) && (parameterValues.Length > 0)) { SqlParameter[] commandParameters = SqlHelperParameterCache.GetSpParameterSet(connectionString, spName); AssignParameterValues(commandParameters, parameterValues); return ExecuteReader(connectionString, CommandType.StoredProcedure, spName, commandParameters); } else { // Otherwise we can just call the SP without params return ExecuteReader(connectionString, CommandType.StoredProcedure, spName); } } public static SqlDataReader ExecuteReader(SqlConnection connection, CommandType commandType, string commandText) { // Pass through the call providing null for the set of SqlParameters return ExecuteReader(connection, commandType, commandText, (SqlParameter[])null); } public static SqlDataReader ExecuteReader(SqlConnection connection, CommandType commandType, string commandText, params SqlParameter[] commandParameters) { // Pass through the call to the private overload using a null transaction value and an externally owned connection return ExecuteReader(connection, (SqlTransaction)null, commandType, commandText, commandParameters, SqlConnectionOwnership.External); } public static SqlDataReader ExecuteReader(SqlConnection connection, string spName, params object[] parameterValues) { if (connection == null) throw new ArgumentNullException("connection"); if (spName == null || spName.Length == 0) throw new ArgumentNullException("spName"); // If we receive parameter values, we need to figure out where they go if ((parameterValues != null) && (parameterValues.Length > 0)) { SqlParameter[] commandParameters = SqlHelperParameterCache.GetSpParameterSet(connection, spName); AssignParameterValues(commandParameters, parameterValues); return ExecuteReader(connection, CommandType.StoredProcedure, spName, commandParameters); } else { // Otherwise we can just call the SP without params return ExecuteReader(connection, CommandType.StoredProcedure, spName); } } public static SqlDataReader ExecuteReader(SqlTransaction transaction, CommandType commandType, string commandText) { // Pass through the call providing null for the set of SqlParameters return ExecuteReader(transaction, commandType, commandText, (SqlParameter[])null); } public static SqlDataReader ExecuteReader(SqlTransaction transaction, CommandType commandType, string commandText, params SqlParameter[] commandParameters) { if (transaction == null) throw new ArgumentNullException("transaction"); if (transaction != null && transaction.Connection == null) throw new ArgumentException("The transaction was rollbacked or commited, please provide an open transaction.", "transaction"); // Pass through to private overload, indicating that the connection is owned by the caller return ExecuteReader(transaction.Connection, transaction, commandType, commandText, commandParameters, SqlConnectionOwnership.External); } public static SqlDataReader ExecuteReader(SqlTransaction transaction, string spName, params object[] parameterValues) { if (transaction == null) throw new ArgumentNullException("transaction"); if (transaction != null && transaction.Connection == null) throw new ArgumentException("The transaction was rollbacked or commited, please provide an open transaction.", "transaction"); if (spName == null || spName.Length == 0) throw new ArgumentNullException("spName"); // If we receive parameter values, we need to figure out where they go if ((parameterValues != null) && (parameterValues.Length > 0)) { SqlParameter[] commandParameters = SqlHelperParameterCache.GetSpParameterSet(transaction.Connection, spName); AssignParameterValues(commandParameters, parameterValues); return ExecuteReader(transaction, CommandType.StoredProcedure, spName, commandParameters); } else { // Otherwise we can just call the SP without params return ExecuteReader(transaction, CommandType.StoredProcedure, spName); } } #endregion ExecuteReader #region ExecuteScalar public static object ExecuteScalar(string connectionString, CommandType commandType, string commandText) { // Pass through the call providing null for the set of SqlParameters return ExecuteScalar(connectionString, commandType, commandText, (SqlParameter[])null); } public static object ExecuteScalar(string connectionString, CommandType commandType, string commandText, params SqlParameter[] commandParameters) { if (connectionString == null || connectionString.Length == 0) throw new ArgumentNullException("connectionString"); // Create & open a SqlConnection, and dispose of it after we are done using (SqlConnection connection = new SqlConnection(connectionString)) { connection.Open(); // Call the overload that takes a connection in place of the connection string return ExecuteScalar(connection, commandType, commandText, commandParameters); } } public static object ExecuteScalar(string connectionString, string spName, params object[] parameterValues) { if (connectionString == null || connectionString.Length == 0) throw new ArgumentNullException("connectionString"); if (spName == null || spName.Length == 0) throw new ArgumentNullException("spName"); // If we receive parameter values, we need to figure out where they go if ((parameterValues != null) && (parameterValues.Length > 0)) { // Pull the parameters for this stored procedure from the parameter cache (or discover them & populate the cache) SqlParameter[] commandParameters = SqlHelperParameterCache.GetSpParameterSet(connectionString, spName); // Assign the provided values to these parameters based on parameter order AssignParameterValues(commandParameters, parameterValues); // Call the overload that takes an array of SqlParameters return ExecuteScalar(connectionString, CommandType.StoredProcedure, spName, commandParameters); } else { // Otherwise we can just call the SP without params return ExecuteScalar(connectionString, CommandType.StoredProcedure, spName); } } public static object ExecuteScalar(SqlConnection connection, CommandType commandType, string commandText) { // Pass through the call providing null for the set of SqlParameters return ExecuteScalar(connection, commandType, commandText, (SqlParameter[])null); } public static object ExecuteScalar(SqlConnection connection, CommandType commandType, string commandText, params SqlParameter[] commandParameters) { if (connection == null) throw new ArgumentNullException("connection"); // Create a command and prepare it for execution SqlCommand cmd = new SqlCommand(); bool mustCloseConnection = false; PrepareCommand(cmd, connection, (SqlTransaction)null, commandType, commandText, commandParameters, out mustCloseConnection); // Execute the command & return the results object retval = cmd.ExecuteScalar(); // Detach the SqlParameters from the command object, so they can be used again cmd.Parameters.Clear(); if (mustCloseConnection) connection.Close(); return retval; } public static object ExecuteScalar(SqlConnection connection, string spName, params object[] parameterValues) { if (connection == null) throw new ArgumentNullException("connection"); if (spName == null || spName.Length == 0) throw new ArgumentNullException("spName"); // If we receive parameter values, we need to figure out where they go if ((parameterValues != null) && (parameterValues.Length > 0)) { // Pull the parameters for this stored procedure from the parameter cache (or discover them & populate the cache) SqlParameter[] commandParameters = SqlHelperParameterCache.GetSpParameterSet(connection, spName); // Assign the provided values to these parameters based on parameter order AssignParameterValues(commandParameters, parameterValues); // Call the overload that takes an array of SqlParameters return ExecuteScalar(connection, CommandType.StoredProcedure, spName, commandParameters); } else { // Otherwise we can just call the SP without params return ExecuteScalar(connection, CommandType.StoredProcedure, spName); } } public static object ExecuteScalar(SqlTransaction transaction, CommandType commandType, string commandText) { // Pass through the call providing null for the set of SqlParameters return ExecuteScalar(transaction, commandType, commandText, (SqlParameter[])null); } public static object ExecuteScalar(SqlTransaction transaction, CommandType commandType, string commandText, params SqlParameter[] commandParameters) { if (transaction == null) throw new ArgumentNullException("transaction"); if (transaction != null && transaction.Connection == null) throw new ArgumentException("The transaction was rollbacked or commited, please provide an open transaction.", "transaction"); // Create a command and prepare it for execution SqlCommand cmd = new SqlCommand(); bool mustCloseConnection = false; PrepareCommand(cmd, transaction.Connection, transaction, commandType, commandText, commandParameters, out mustCloseConnection); // Execute the command & return the results object retval = cmd.ExecuteScalar(); // Detach the SqlParameters from the command object, so they can be used again cmd.Parameters.Clear(); return retval; } public static object ExecuteScalar(SqlTransaction transaction, string spName, params object[] parameterValues) { if (transaction == null) throw new ArgumentNullException("transaction"); if (transaction != null && transaction.Connection == null) throw new ArgumentException("The transaction was rollbacked or commited, please provide an open transaction.", "transaction"); if (spName == null || spName.Length == 0) throw new ArgumentNullException("spName"); // If we receive parameter values, we need to figure out where they go if ((parameterValues != null) && (parameterValues.Length > 0)) { // PPull the parameters for this stored procedure from the parameter cache (or discover them & populate the cache) SqlParameter[] commandParameters = SqlHelperParameterCache.GetSpParameterSet(transaction.Connection, spName); // Assign the provided values to these parameters based on parameter order AssignParameterValues(commandParameters, parameterValues); // Call the overload that takes an array of SqlParameters return ExecuteScalar(transaction, CommandType.StoredProcedure, spName, commandParameters); } else { // Otherwise we can just call the SP without params return ExecuteScalar(transaction, CommandType.StoredProcedure, spName); } } #endregion ExecuteScalar #region ExecuteXmlReader public static XmlReader ExecuteXmlReader(SqlConnection connection, CommandType commandType, string commandText) { // Pass through the call providing null for the set of SqlParameters return ExecuteXmlReader(connection, commandType, commandText, (SqlParameter[])null); } public static XmlReader ExecuteXmlReader(SqlConnection connection, CommandType commandType, string commandText, params SqlParameter[] commandParameters) { if (connection == null) throw new ArgumentNullException("connection"); bool mustCloseConnection = false; // Create a command and prepare it for execution SqlCommand cmd = new SqlCommand(); try { PrepareCommand(cmd, connection, (SqlTransaction)null, commandType, commandText, commandParameters, out mustCloseConnection); // Create the DataAdapter & DataSet XmlReader retval = cmd.ExecuteXmlReader(); // Detach the SqlParameters from the command object, so they can be used again cmd.Parameters.Clear(); return retval; } catch { if (mustCloseConnection) connection.Close(); throw; } } public static XmlReader ExecuteXmlReader(SqlConnection connection, string spName, params object[] parameterValues) { if (connection == null) throw new ArgumentNullException("connection"); if (spName == null || spName.Length == 0) throw new ArgumentNullException("spName"); // If we receive parameter values, we need to figure out where they go if ((parameterValues != null) && (parameterValues.Length > 0)) { // Pull the parameters for this stored procedure from the parameter cache (or discover them & populate the cache) SqlParameter[] commandParameters = SqlHelperParameterCache.GetSpParameterSet(connection, spName); // Assign the provided values to these parameters based on parameter order AssignParameterValues(commandParameters, parameterValues); // Call the overload that takes an array of SqlParameters return ExecuteXmlReader(connection, CommandType.StoredProcedure, spName, commandParameters); } else { // Otherwise we can just call the SP without params return ExecuteXmlReader(connection, CommandType.StoredProcedure, spName); } } public static XmlReader ExecuteXmlReader(SqlTransaction transaction, CommandType commandType, string commandText) { // Pass through the call providing null for the set of SqlParameters return ExecuteXmlReader(transaction, commandType, commandText, (SqlParameter[])null); } public static XmlReader ExecuteXmlReader(SqlTransaction transaction, CommandType commandType, string commandText, params SqlParameter[] commandParameters) { if (transaction == null) throw new ArgumentNullException("transaction"); if (transaction != null && transaction.Connection == null) throw new ArgumentException("The transaction was rollbacked or commited, please provide an open transaction.", "transaction"); // Create a command and prepare it for execution SqlCommand cmd = new SqlCommand(); bool mustCloseConnection = false; PrepareCommand(cmd, transaction.Connection, transaction, commandType, commandText, commandParameters, out mustCloseConnection); // Create the DataAdapter & DataSet XmlReader retval = cmd.ExecuteXmlReader(); // Detach the SqlParameters from the command object, so they can be used again cmd.Parameters.Clear(); return retval; } public static XmlReader ExecuteXmlReader(SqlTransaction transaction, string spName, params object[] parameterValues) { if (transaction == null) throw new ArgumentNullException("transaction"); if (transaction != null && transaction.Connection == null) throw new ArgumentException("The transaction was rollbacked or commited, please provide an open transaction.", "transaction"); if (spName == null || spName.Length == 0) throw new ArgumentNullException("spName"); // If we receive parameter values, we need to figure out where they go if ((parameterValues != null) && (parameterValues.Length > 0)) { // Pull the parameters for this stored procedure from the parameter cache (or discover them & populate the cache) SqlParameter[] commandParameters = SqlHelperParameterCache.GetSpParameterSet(transaction.Connection, spName); // Assign the provided values to these parameters based on parameter order AssignParameterValues(commandParameters, parameterValues); // Call the overload that takes an array of SqlParameters return ExecuteXmlReader(transaction, CommandType.StoredProcedure, spName, commandParameters); } else { // Otherwise we can just call the SP without params return ExecuteXmlReader(transaction, CommandType.StoredProcedure, spName); } } #endregion ExecuteXmlReader #region FillDataset public static void FillDataset(string connectionString, CommandType commandType, string commandText, DataSet dataSet, string[] tableNames) { if (connectionString == null || connectionString.Length == 0) throw new ArgumentNullException("connectionString"); if (dataSet == null) throw new ArgumentNullException("dataSet"); // Create & open a SqlConnection, and dispose of it after we are done using (SqlConnection connection = new SqlConnection(connectionString)) { connection.Open(); // Call the overload that takes a connection in place of the connection string FillDataset(connection, commandType, commandText, dataSet, tableNames); } } public static void FillDataset(string connectionString, CommandType commandType, string commandText, DataSet dataSet, string[] tableNames, params SqlParameter[] commandParameters) { if (connectionString == null || connectionString.Length == 0) throw new ArgumentNullException("connectionString"); if (dataSet == null) throw new ArgumentNullException("dataSet"); // Create & open a SqlConnection, and dispose of it after we are done using (SqlConnection connection = new SqlConnection(connectionString)) { connection.Open(); // Call the overload that takes a connection in place of the connection string FillDataset(connection, commandType, commandText, dataSet, tableNames, commandParameters); } } public static void FillDataset(string connectionString, string spName, DataSet dataSet, string[] tableNames, params object[] parameterValues) { if (connectionString == null || connectionString.Length == 0) throw new ArgumentNullException("connectionString"); if (dataSet == null) throw new ArgumentNullException("dataSet"); // Create & open a SqlConnection, and dispose of it after we are done using (SqlConnection connection = new SqlConnection(connectionString)) { connection.Open(); // Call the overload that takes a connection in place of the connection string FillDataset(connection, spName, dataSet, tableNames, parameterValues); } } public static void FillDataset(SqlConnection connection, CommandType commandType, string commandText, DataSet dataSet, string[] tableNames) { FillDataset(connection, commandType, commandText, dataSet, tableNames, null); } public static void FillDataset(SqlConnection connection, CommandType commandType, string commandText, DataSet dataSet, string[] tableNames, params SqlParameter[] commandParameters) { FillDataset(connection, null, commandType, commandText, dataSet, tableNames, commandParameters); } public static void FillDataset(SqlConnection connection, string spName, DataSet dataSet, string[] tableNames, params object[] parameterValues) { if (connection == null) throw new ArgumentNullException("connection"); if (dataSet == null) throw new ArgumentNullException("dataSet"); if (spName == null || spName.Length == 0) throw new ArgumentNullException("spName"); // If we receive parameter values, we need to figure out where they go if ((parameterValues != null) && (parameterValues.Length > 0)) { // Pull the parameters for this stored procedure from the parameter cache (or discover them & populate the cache) SqlParameter[] commandParameters = SqlHelperParameterCache.GetSpParameterSet(connection, spName); // Assign the provided values to these parameters based on parameter order AssignParameterValues(commandParameters, parameterValues); // Call the overload that takes an array of SqlParameters FillDataset(connection, CommandType.StoredProcedure, spName, dataSet, tableNames, commandParameters); } else { // Otherwise we can just call the SP without params FillDataset(connection, CommandType.StoredProcedure, spName, dataSet, tableNames); } } public static void FillDataset(SqlTransaction transaction, CommandType commandType, string commandText, DataSet dataSet, string[] tableNames) { FillDataset(transaction, commandType, commandText, dataSet, tableNames, null); } public static void FillDataset(SqlTransaction transaction, CommandType commandType, string commandText, DataSet dataSet, string[] tableNames, params SqlParameter[] commandParameters) { FillDataset(transaction.Connection, transaction, commandType, commandText, dataSet, tableNames, commandParameters); } public static void FillDataset(SqlTransaction transaction, string spName, DataSet dataSet, string[] tableNames, params object[] parameterValues) { if (transaction == null) throw new ArgumentNullException("transaction"); if (transaction != null && transaction.Connection == null) throw new ArgumentException("The transaction was rollbacked or commited, please provide an open transaction.", "transaction"); if (dataSet == null) throw new ArgumentNullException("dataSet"); if (spName == null || spName.Length == 0) throw new ArgumentNullException("spName"); // If we receive parameter values, we need to figure out where they go if ((parameterValues != null) && (parameterValues.Length > 0)) { // Pull the parameters for this stored procedure from the parameter cache (or discover them & populate the cache) SqlParameter[] commandParameters = SqlHelperParameterCache.GetSpParameterSet(transaction.Connection, spName); // Assign the provided values to these parameters based on parameter order AssignParameterValues(commandParameters, parameterValues); // Call the overload that takes an array of SqlParameters FillDataset(transaction, CommandType.StoredProcedure, spName, dataSet, tableNames, commandParameters); } else { // Otherwise we can just call the SP without params FillDataset(transaction, CommandType.StoredProcedure, spName, dataSet, tableNames); } } private static void FillDataset(SqlConnection connection, SqlTransaction transaction, CommandType commandType, string commandText, DataSet dataSet, string[] tableNames, params SqlParameter[] commandParameters) { if (connection == null) throw new ArgumentNullException("connection"); if (dataSet == null) throw new ArgumentNullException("dataSet"); // Create a command and prepare it for execution SqlCommand command = new SqlCommand(); bool mustCloseConnection = false; PrepareCommand(command, connection, transaction, commandType, commandText, commandParameters, out mustCloseConnection); // Create the DataAdapter & DataSet using (SqlDataAdapter dataAdapter = new SqlDataAdapter(command)) { // Add the table mappings specified by the user if (tableNames != null && tableNames.Length > 0) { string tableName = "Table"; for (int index = 0; index < tableNames.Length; index++) { if (tableNames[index] == null || tableNames[index].Length == 0) throw new ArgumentException("The tableNames parameter must contain a list of tables, a value was provided as null or empty string.", "tableNames"); dataAdapter.TableMappings.Add(tableName, tableNames[index]); tableName += (index + 1).ToString(); } } // Fill the DataSet using default values for DataTable names, etc dataAdapter.Fill(dataSet); // Detach the SqlParameters from the command object, so they can be used again command.Parameters.Clear(); } if (mustCloseConnection) connection.Close(); } #endregion #region UpdateDataset public static void UpdateDataset(SqlCommand insertCommand, SqlCommand deleteCommand, SqlCommand updateCommand, DataSet dataSet, string tableName) { if (insertCommand == null) throw new ArgumentNullException("insertCommand"); if (deleteCommand == null) throw new ArgumentNullException("deleteCommand"); if (updateCommand == null) throw new ArgumentNullException("updateCommand"); if (tableName == null || tableName.Length == 0) throw new ArgumentNullException("tableName"); // Create a SqlDataAdapter, and dispose of it after we are done using (SqlDataAdapter dataAdapter = new SqlDataAdapter()) { // Set the data adapter commands dataAdapter.UpdateCommand = updateCommand; dataAdapter.InsertCommand = insertCommand; dataAdapter.DeleteCommand = deleteCommand; // Update the dataset changes in the data source dataAdapter.Update(dataSet, tableName); // Commit all the changes made to the DataSet dataSet.AcceptChanges(); } } #endregion #region CreateCommand public static SqlCommand CreateCommand(SqlConnection connection, string spName, params string[] sourceColumns) { if (connection == null) throw new ArgumentNullException("connection"); if (spName == null || spName.Length == 0) throw new ArgumentNullException("spName"); // Create a SqlCommand SqlCommand cmd = new SqlCommand(spName, connection); cmd.CommandType = CommandType.StoredProcedure; // If we receive parameter values, we need to figure out where they go if ((sourceColumns != null) && (sourceColumns.Length > 0)) { // Pull the parameters for this stored procedure from the parameter cache (or discover them & populate the cache) SqlParameter[] commandParameters = SqlHelperParameterCache.GetSpParameterSet(connection, spName); // Assign the provided source columns to these parameters based on parameter order for (int index = 0; index < sourceColumns.Length; index++) commandParameters[index].SourceColumn = sourceColumns[index]; // Attach the discovered parameters to the SqlCommand object AttachParameters(cmd, commandParameters); } return cmd; } #endregion #region ExecuteNonQueryTypedParams public static int ExecuteNonQueryTypedParams(String connectionString, String spName, DataRow dataRow) { if (connectionString == null || connectionString.Length == 0) throw new ArgumentNullException("connectionString"); if (spName == null || spName.Length == 0) throw new ArgumentNullException("spName"); // If the row has values, the store procedure parameters must be initialized if (dataRow != null && dataRow.ItemArray.Length > 0) { // Pull the parameters for this stored procedure from the parameter cache (or discover them & populate the cache) SqlParameter[] commandParameters = SqlHelperParameterCache.GetSpParameterSet(connectionString, spName); // Set the parameters values AssignParameterValues(commandParameters, dataRow); return SqlHelperr.ExecuteNonQuery(connectionString, CommandType.StoredProcedure, spName, commandParameters); } else { return SqlHelperr.ExecuteNonQuery(connectionString, CommandType.StoredProcedure, spName); } } public static int ExecuteNonQueryTypedParams(SqlConnection connection, String spName, DataRow dataRow) { if (connection == null) throw new ArgumentNullException("connection"); if (spName == null || spName.Length == 0) throw new ArgumentNullException("spName"); // If the row has values, the store procedure parameters must be initialized if (dataRow != null && dataRow.ItemArray.Length > 0) { // Pull the parameters for this stored procedure from the parameter cache (or discover them & populate the cache) SqlParameter[] commandParameters = SqlHelperParameterCache.GetSpParameterSet(connection, spName); // Set the parameters values AssignParameterValues(commandParameters, dataRow); return SqlHelperr.ExecuteNonQuery(connection, CommandType.StoredProcedure, spName, commandParameters); } else { return SqlHelperr.ExecuteNonQuery(connection, CommandType.StoredProcedure, spName); } } public static int ExecuteNonQueryTypedParams(SqlTransaction transaction, String spName, DataRow dataRow) { if (transaction == null) throw new ArgumentNullException("transaction"); if (transaction != null && transaction.Connection == null) throw new ArgumentException("The transaction was rollbacked or commited, please provide an open transaction.", "transaction"); if (spName == null || spName.Length == 0) throw new ArgumentNullException("spName"); // Sf the row has values, the store procedure parameters must be initialized if (dataRow != null && dataRow.ItemArray.Length > 0) { // Pull the parameters for this stored procedure from the parameter cache (or discover them & populate the cache) SqlParameter[] commandParameters = SqlHelperParameterCache.GetSpParameterSet(transaction.Connection, spName); // Set the parameters values AssignParameterValues(commandParameters, dataRow); return SqlHelperr.ExecuteNonQuery(transaction, CommandType.StoredProcedure, spName, commandParameters); } else { return SqlHelperr.ExecuteNonQuery(transaction, CommandType.StoredProcedure, spName); } } #endregion #region ExecuteDatasetTypedParams public static DataSet ExecuteDatasetTypedParams(string connectionString, String spName, DataRow dataRow) { if (connectionString == null || connectionString.Length == 0) throw new ArgumentNullException("connectionString"); if (spName == null || spName.Length == 0) throw new ArgumentNullException("spName"); //If the row has values, the store procedure parameters must be initialized if (dataRow != null && dataRow.ItemArray.Length > 0) { // Pull the parameters for this stored procedure from the parameter cache (or discover them & populate the cache) SqlParameter[] commandParameters = SqlHelperParameterCache.GetSpParameterSet(connectionString, spName); // Set the parameters values AssignParameterValues(commandParameters, dataRow); return SqlHelperr.ExecuteDataset(connectionString, CommandType.StoredProcedure, spName, commandParameters); } else { return SqlHelperr.ExecuteDataset(connectionString, CommandType.StoredProcedure, spName); } } public static DataSet ExecuteDatasetTypedParams(SqlConnection connection, String spName, DataRow dataRow) { if (connection == null) throw new ArgumentNullException("connection"); if (spName == null || spName.Length == 0) throw new ArgumentNullException("spName"); // If the row has values, the store procedure parameters must be initialized if (dataRow != null && dataRow.ItemArray.Length > 0) { // Pull the parameters for this stored procedure from the parameter cache (or discover them & populate the cache) SqlParameter[] commandParameters = SqlHelperParameterCache.GetSpParameterSet(connection, spName); // Set the parameters values AssignParameterValues(commandParameters, dataRow); return SqlHelperr.ExecuteDataset(connection, CommandType.StoredProcedure, spName, commandParameters); } else { return SqlHelperr.ExecuteDataset(connection, CommandType.StoredProcedure, spName); } } public static DataSet ExecuteDatasetTypedParams(SqlTransaction transaction, String spName, DataRow dataRow) { if (transaction == null) throw new ArgumentNullException("transaction"); if (transaction != null && transaction.Connection == null) throw new ArgumentException("The transaction was rollbacked or commited, please provide an open transaction.", "transaction"); if (spName == null || spName.Length == 0) throw new ArgumentNullException("spName"); // If the row has values, the store procedure parameters must be initialized if (dataRow != null && dataRow.ItemArray.Length > 0) { // Pull the parameters for this stored procedure from the parameter cache (or discover them & populate the cache) SqlParameter[] commandParameters = SqlHelperParameterCache.GetSpParameterSet(transaction.Connection, spName); // Set the parameters values AssignParameterValues(commandParameters, dataRow); return SqlHelperr.ExecuteDataset(transaction, CommandType.StoredProcedure, spName, commandParameters); } else { return SqlHelperr.ExecuteDataset(transaction, CommandType.StoredProcedure, spName); } } #endregion #region ExecuteReaderTypedParams public static SqlDataReader ExecuteReaderTypedParams(String connectionString, String spName, DataRow dataRow) { if (connectionString == null || connectionString.Length == 0) throw new ArgumentNullException("connectionString"); if (spName == null || spName.Length == 0) throw new ArgumentNullException("spName"); // If the row has values, the store procedure parameters must be initialized if (dataRow != null && dataRow.ItemArray.Length > 0) { // Pull the parameters for this stored procedure from the parameter cache (or discover them & populate the cache) SqlParameter[] commandParameters = SqlHelperParameterCache.GetSpParameterSet(connectionString, spName); // Set the parameters values AssignParameterValues(commandParameters, dataRow); return SqlHelperr.ExecuteReader(connectionString, CommandType.StoredProcedure, spName, commandParameters); } else { return SqlHelperr.ExecuteReader(connectionString, CommandType.StoredProcedure, spName); } } public static SqlDataReader ExecuteReaderTypedParams(SqlConnection connection, String spName, DataRow dataRow) { if (connection == null) throw new ArgumentNullException("connection"); if (spName == null || spName.Length == 0) throw new ArgumentNullException("spName"); // If the row has values, the store procedure parameters must be initialized if (dataRow != null && dataRow.ItemArray.Length > 0) { // Pull the parameters for this stored procedure from the parameter cache (or discover them & populate the cache) SqlParameter[] commandParameters = SqlHelperParameterCache.GetSpParameterSet(connection, spName); // Set the parameters values AssignParameterValues(commandParameters, dataRow); return SqlHelperr.ExecuteReader(connection, CommandType.StoredProcedure, spName, commandParameters); } else { return SqlHelperr.ExecuteReader(connection, CommandType.StoredProcedure, spName); } } public static SqlDataReader ExecuteReaderTypedParams(SqlTransaction transaction, String spName, DataRow dataRow) { if (transaction == null) throw new ArgumentNullException("transaction"); if (transaction != null && transaction.Connection == null) throw new ArgumentException("The transaction was rollbacked or commited, please provide an open transaction.", "transaction"); if (spName == null || spName.Length == 0) throw new ArgumentNullException("spName"); // If the row has values, the store procedure parameters must be initialized if (dataRow != null && dataRow.ItemArray.Length > 0) { // Pull the parameters for this stored procedure from the parameter cache (or discover them & populate the cache) SqlParameter[] commandParameters = SqlHelperParameterCache.GetSpParameterSet(transaction.Connection, spName); // Set the parameters values AssignParameterValues(commandParameters, dataRow); return SqlHelperr.ExecuteReader(transaction, CommandType.StoredProcedure, spName, commandParameters); } else { return SqlHelperr.ExecuteReader(transaction, CommandType.StoredProcedure, spName); } } #endregion #region ExecuteScalarTypedParams public static object ExecuteScalarTypedParams(String connectionString, String spName, DataRow dataRow) { if (connectionString == null || connectionString.Length == 0) throw new ArgumentNullException("connectionString"); if (spName == null || spName.Length == 0) throw new ArgumentNullException("spName"); // If the row has values, the store procedure parameters must be initialized if (dataRow != null && dataRow.ItemArray.Length > 0) { // Pull the parameters for this stored procedure from the parameter cache (or discover them & populate the cache) SqlParameter[] commandParameters = SqlHelperParameterCache.GetSpParameterSet(connectionString, spName); // Set the parameters values AssignParameterValues(commandParameters, dataRow); return SqlHelperr.ExecuteScalar(connectionString, CommandType.StoredProcedure, spName, commandParameters); } else { return SqlHelperr.ExecuteScalar(connectionString, CommandType.StoredProcedure, spName); } } public static object ExecuteScalarTypedParams(SqlConnection connection, String spName, DataRow dataRow) { if (connection == null) throw new ArgumentNullException("connection"); if (spName == null || spName.Length == 0) throw new ArgumentNullException("spName"); // If the row has values, the store procedure parameters must be initialized if (dataRow != null && dataRow.ItemArray.Length > 0) { // Pull the parameters for this stored procedure from the parameter cache (or discover them & populate the cache) SqlParameter[] commandParameters = SqlHelperParameterCache.GetSpParameterSet(connection, spName); // Set the parameters values AssignParameterValues(commandParameters, dataRow); return SqlHelperr.ExecuteScalar(connection, CommandType.StoredProcedure, spName, commandParameters); } else { return SqlHelperr.ExecuteScalar(connection, CommandType.StoredProcedure, spName); } } public static object ExecuteScalarTypedParams(SqlTransaction transaction, String spName, DataRow dataRow) { if (transaction == null) throw new ArgumentNullException("transaction"); if (transaction != null && transaction.Connection == null) throw new ArgumentException("The transaction was rollbacked or commited, please provide an open transaction.", "transaction"); if (spName == null || spName.Length == 0) throw new ArgumentNullException("spName"); // If the row has values, the store procedure parameters must be initialized if (dataRow != null && dataRow.ItemArray.Length > 0) { // Pull the parameters for this stored procedure from the parameter cache (or discover them & populate the cache) SqlParameter[] commandParameters = SqlHelperParameterCache.GetSpParameterSet(transaction.Connection, spName); // Set the parameters values AssignParameterValues(commandParameters, dataRow); return SqlHelperr.ExecuteScalar(transaction, CommandType.StoredProcedure, spName, commandParameters); } else { return SqlHelperr.ExecuteScalar(transaction, CommandType.StoredProcedure, spName); } } #endregion #region ExecuteXmlReaderTypedParams public static XmlReader ExecuteXmlReaderTypedParams(SqlConnection connection, String spName, DataRow dataRow) { if (connection == null) throw new ArgumentNullException("connection"); if (spName == null || spName.Length == 0) throw new ArgumentNullException("spName"); // If the row has values, the store procedure parameters must be initialized if (dataRow != null && dataRow.ItemArray.Length > 0) { // Pull the parameters for this stored procedure from the parameter cache (or discover them & populate the cache) SqlParameter[] commandParameters = SqlHelperParameterCache.GetSpParameterSet(connection, spName); // Set the parameters values AssignParameterValues(commandParameters, dataRow); return SqlHelperr.ExecuteXmlReader(connection, CommandType.StoredProcedure, spName, commandParameters); } else { return SqlHelperr.ExecuteXmlReader(connection, CommandType.StoredProcedure, spName); } } public static XmlReader ExecuteXmlReaderTypedParams(SqlTransaction transaction, String spName, DataRow dataRow) { if (transaction == null) throw new ArgumentNullException("transaction"); if (transaction != null && transaction.Connection == null) throw new ArgumentException("The transaction was rollbacked or commited, please provide an open transaction.", "transaction"); if (spName == null || spName.Length == 0) throw new ArgumentNullException("spName"); // If the row has values, the store procedure parameters must be initialized if (dataRow != null && dataRow.ItemArray.Length > 0) { // Pull the parameters for this stored procedure from the parameter cache (or discover them & populate the cache) SqlParameter[] commandParameters = SqlHelperParameterCache.GetSpParameterSet(transaction.Connection, spName); // Set the parameters values AssignParameterValues(commandParameters, dataRow); return SqlHelperr.ExecuteXmlReader(transaction, CommandType.StoredProcedure, spName, commandParameters); } else { return SqlHelperr.ExecuteXmlReader(transaction, CommandType.StoredProcedure, spName); } } #endregion } /// <summary> /// SqlHelperParameterCache provides functions to leverage a static cache of procedure parameters, and the /// ability to discover parameters for stored procedures at run-time. /// </summary> public sealed class SqlHelperParameterCache { #region private methods, variables, and constructors //Since this class provides only static methods, make the default constructor private to prevent //instances from being created with "new SqlHelperParameterCache()" private SqlHelperParameterCache() { } private static Hashtable paramCache = Hashtable.Synchronized(new Hashtable()); private static SqlParameter[] DiscoverSpParameterSet(SqlConnection connection, string spName, bool includeReturnValueParameter) { if (connection == null) throw new ArgumentNullException("connection"); if (spName == null || spName.Length == 0) throw new ArgumentNullException("spName"); SqlCommand cmd = new SqlCommand(spName, connection); cmd.CommandType = CommandType.StoredProcedure; connection.Open(); SqlCommandBuilder.DeriveParameters(cmd); connection.Close(); if (!includeReturnValueParameter) { cmd.Parameters.RemoveAt(0); } SqlParameter[] discoveredParameters = new SqlParameter[cmd.Parameters.Count]; cmd.Parameters.CopyTo(discoveredParameters, 0); // Init the parameters with a DBNull value foreach (SqlParameter discoveredParameter in discoveredParameters) { discoveredParameter.Value = DBNull.Value; } return discoveredParameters; } private static SqlParameter[] CloneParameters(SqlParameter[] originalParameters) { SqlParameter[] clonedParameters = new SqlParameter[originalParameters.Length]; for (int i = 0, j = originalParameters.Length; i < j; i++) { clonedParameters[i] = (SqlParameter)((ICloneable)originalParameters[i]).Clone(); } return clonedParameters; } #endregion private methods, variables, and constructors #region caching functions public static void CacheParameterSet(string connectionString, string commandText, params SqlParameter[] commandParameters) { if (connectionString == null || connectionString.Length == 0) throw new ArgumentNullException("connectionString"); if (commandText == null || commandText.Length == 0) throw new ArgumentNullException("commandText"); string hashKey = connectionString + ":" + commandText; paramCache[hashKey] = commandParameters; } public static SqlParameter[] GetCachedParameterSet(string connectionString, string commandText) { if (connectionString == null || connectionString.Length == 0) throw new ArgumentNullException("connectionString"); if (commandText == null || commandText.Length == 0) throw new ArgumentNullException("commandText"); string hashKey = connectionString + ":" + commandText; SqlParameter[] cachedParameters = paramCache[hashKey] as SqlParameter[]; if (cachedParameters == null) { return null; } else { return CloneParameters(cachedParameters); } } #endregion caching functions #region Parameter Discovery Functions public static SqlParameter[] GetSpParameterSet(string connectionString, string spName) { return GetSpParameterSet(connectionString, spName, false); } public static SqlParameter[] GetSpParameterSet(string connectionString, string spName, bool includeReturnValueParameter) { if (connectionString == null || connectionString.Length == 0) throw new ArgumentNullException("connectionString"); if (spName == null || spName.Length == 0) throw new ArgumentNullException("spName"); using (SqlConnection connection = new SqlConnection(connectionString)) { return GetSpParameterSetInternal(connection, spName, includeReturnValueParameter); } } internal static SqlParameter[] GetSpParameterSet(SqlConnection connection, string spName) { return GetSpParameterSet(connection, spName, false); } internal static SqlParameter[] GetSpParameterSet(SqlConnection connection, string spName, bool includeReturnValueParameter) { if (connection == null) throw new ArgumentNullException("connection"); using (SqlConnection clonedConnection = (SqlConnection)((ICloneable)connection).Clone()) { return GetSpParameterSetInternal(clonedConnection, spName, includeReturnValueParameter); } } private static SqlParameter[] GetSpParameterSetInternal(SqlConnection connection, string spName, bool includeReturnValueParameter) { if (connection == null) throw new ArgumentNullException("connection"); if (spName == null || spName.Length == 0) throw new ArgumentNullException("spName"); string hashKey = connection.ConnectionString + ":" + spName + (includeReturnValueParameter ? ":include ReturnValue Parameter" : ""); SqlParameter[] cachedParameters; cachedParameters = paramCache[hashKey] as SqlParameter[]; if (cachedParameters == null) { SqlParameter[] spParameters = DiscoverSpParameterSet(connection, spName, includeReturnValueParameter); paramCache[hashKey] = spParameters; cachedParameters = spParameters; } return CloneParameters(cachedParameters); } #endregion Parameter Discovery Functions } }