How to config Bananapi pro AV output as default video signal ?

To get the tools, go to the git repository at https://github.com/linux-sunxi/sunxi-tools/ and download the ZIP file  unzip the file on Ubuntu desktop the folder call is: "sunxi-tools-master" Open terminal and type: $ sudo apt-get install libusb-1.0-0-dev then go to directory: $ cd Desktop) $ cd sunxi-tools-master copy the file script.bin from SD of Banana Pi, and paste on "sunxi-tools-master" (folder) on terminal type: $ make bin2fex $ ./bin2fex script.bin >./script.fex The script.fex file has created on sunxi-tools-master then open with a text editor find this line: [disp_init] there paste & replace  (http://wiki.lemaker.org/index.ph ... n#Porting_AV_driver): [disp_init] disp_init_enable = 1 disp_mode = 0 screen0_output_type = 2 screen0_output_mode = 11 screen1_output_type = 0 screen1_output_mode = 4 fb0_width = 1024 fb0_height = 768 fb0_framebuffer_num = 2 fb0_format = 10 fb0_pixel_sequence = 0 fb0_scaler_mode_enable = 0 fb1_width = 1024 fb1_height = 768 fb1_framebuffer_num = 2 fb1_format = 10 fb1_pixel_sequence = 0 fb1_scaler_mode_enable = 0 lcd0_backlight = 197 lcd1_backlight = 197 lcd0_bright = 50 lcd0_contrast = 50 lcd0_saturation = 57 lcd0_hue = 50 lcd1_bright = 50 lcd1_contrast = 50 lcd1_saturation = 57 lcd1_hue = 50   go to terminal again type: $ make fex2bin $ ./fex2bin script.fex >./script.bin copy the file script.bin from sunxi-tools-master (folder) go to SD card paste & replace the script.bin file That's all.