SVN管理代码工具的一些心得

 第一步：mkdir /Users/svn
 第二步：svnadmin create /Users/svn/repository
 第三步：修改respotitory目录下的conf目录下的文件
               1、修改passwd文件 ：
 ### This file is an example password file for svnserve.
 ### Its format is similar to that of svnserve.conf. As shown in the
 ### example below it contains one section labelled [users].
 ### The name and password for each user follow, one account per line.

 [users]
 huangyibiao = tianshi520   (这个是我自己设置的帐号和密码)
 sally = sallyssecret
              2、修改authz文件
 ### This file is an example authorization file for svnserve.
 ### Its format is identical to that of mod_authz_svn authorization
 ### files.
 ### As shown below each section defines authorizations for the path and
 ### (optional) repository specified by the section name.
 ### The authorizations follow. An authorization line can refer to:
 ###  - a single user,
 ###  - a group of users defined in a special [groups] section,
 ###  - an alias defined in a special [aliases] section,
 ###  - all authenticated users, using the '$authenticated' token,
 ###  - only anonymous users, using the '$anonymous' token,
 ###  - anyone, using the '*' wildcard.
 ###
 ### A match can be inverted by prefixing the rule with '~'. Rules can
 ### grant read ('r') access, read-write ('rw') access, or no access
 ### ('').


 [aliases]
 # joe = /C=XZ/ST=Dessert/L=Snake City/O=Snake Oil, Ltd./OU=Research Institute/CN=Joe Average


 [groups]
 huangyibiao_and_sally = huangyibiao,sally
 # harry_sally_and_joe = harry,sally,&joe


 # [/foo/bar]
 # harry = rw
 # &joe = r
 # * =


 [/]
 @huangyibiao_and_sally = rw
 * =


 # [repository:/baz/fuz]
 # @harry_and_sally = rw
 # * = r
                            3、svnserve.conf文件
 ### This file controls the configuration of the svnserve daemon, if you
 ### use it to allow access to this repository.  (If you only allow
 ### access through http: and/or file: URLs, then this file is
 ### irrelevant.)

 ### Visit http://subversion.apache.org/ for more information.

 [general]
 ### The anon-access and auth-access options control access to the
 ### repository for unauthenticated (a.k.a. anonymous) users and
 ### authenticated users, respectively.
 ### Valid values are "write", "read", and "none".
 ### Setting the value to "none" prohibits both reading and writing;
 ### "read" allows read-only access, and "write" allows complete
 ### read/write access to the repository.
 ### The sample settings below are the defaults and specify that anonymous
 ### users have read-only access to the repository, while authenticated
 ### users have read and write access to the repository.
 anon-access = none
 auth-access = write
 ### The password-db option controls the location of the password
 ### database file.  Unless you specify a path starting with a /,
 ### the file's location is relative to the directory containing
 ### this configuration file.
 ### If SASL is enabled (see below), this file will NOT be used.
 ### Uncomment the line below to use the default password file.
 password-db = passwd
 ### The authz-db option controls the location of the authorization
 ### rules for path-based access control.  Unless you specify a path
 ### starting with a /, the file's location is relative to the the
 ### directory containing this file.  If you don't specify an
 ### authz-db, no path-based access control is done.
 ### Uncomment the line below to use the default authorization file.
 authz-db = authz
 ### This option specifies the authentication realm of the repository.
 ### If two repositories have the same authentication realm, they should
 ### have the same password database, and vice versa.  The default realm
 ### is repository's uuid.
 # realm = My First Repository
 ### The force-username-case option causes svnserve to case-normalize
 ### usernames before comparing them against the authorization rules in the

 第四步：启动服务
 sudo svnserve -d -r /svn/repository
 如果没有任何提示，表示正常启动了，如果已经启动了，会提示端口已经被占用（英文的）

 第五步：导入工程到svn
 svn import /Users/huangyibiao/Desktop/UdpServer   svn://localhost/svn/repository/SocketRepository --username harry --password harryssecret -m "commnet infomation"
 /Users/huangyibiao/Desktop/UdpServer这个参数是工程路径
 svn://localhost/svn/repository/SocketRepository这个是svn服务器，下的一个新建的名称SocketRepository
 到此，需要输入你的svn的帐号和密码，也就是前面在passwd文件中配置的。如果出现一堆Adding。。。，那就是正常配置完成了。

 下面推荐一个好友的SVN客户端工具：versions


 很久没有写博客了，为了配置这个svn，花了一晚上和一个早上的时间，才正确地配置出来，当然这个过程花了我很多的时间去阅读他人的博客，只是很多博客
 在写这个配置过程的时候，都没有使用真正的路径来讲解，弄半天都不知使用哪个路径等等。
 在这里，写下这个教程，帮助后来者，少走一点弯路。
 谢谢！