Python-OpenCV 处理图像（五）：图像中边界和轮廓检测
关于边缘检测的基础来自于一个事实，即在边缘部分，像素值出现”跳跃“或者较大的变化。如果在此边缘部分求取一阶导数，就会看到极值的出现。
而在一阶导数为极值的地方，二阶导数为0，基于这个原理，就可以进行边缘检测。
关于 Laplace 算法原理，可参考
-
Laplace 算子
0x01. Laplace 算法
下面的代码展示了分别对灰度化的图像和原始彩色图像中的边缘进行检测：
import cv2.cv as cv
im=cv.LoadImage('img/building.png', cv.CV_LOAD_IMAGE_COLOR)
# Laplace on a gray scale picture
gray = cv.CreateImage(cv.GetSize(im), 8, 1)
cv.CvtColor(im, gray, cv.CV_BGR2GRAY)
aperture=3
dst = cv.CreateImage(cv.GetSize(gray), cv.IPL_DEPTH_32F, 1)
cv.Laplace(gray, dst,aperture)
cv.Convert(dst,gray)
thresholded = cv.CloneImage(im)
cv.Threshold(im, thresholded, 50, 255, cv.CV_THRESH_BINARY_INV)
cv.ShowImage('Laplaced grayscale',gray)
#------------------------------------
# Laplace on color
planes = [cv.CreateImage(cv.GetSize(im), 8, 1) for i in range(3)]
laplace = cv.CreateImage(cv.GetSize(im), cv.IPL_DEPTH_16S, 1)
colorlaplace = cv.CreateImage(cv.GetSize(im), 8, 3)
cv.Split(im, planes[0], planes[1], planes[2], None) #Split channels to apply laplace on each
for plane in planes:
cv.Laplace(plane, laplace, 3)
cv.ConvertScaleAbs(laplace, plane, 1, 0)
cv.Merge(planes[0], planes[1], planes[2], None, colorlaplace)
cv.ShowImage('Laplace Color', colorlaplace)
#-------------------------------------
cv.WaitKey(0)效果展示
原图
灰度化图片检测
原始彩色图片检测
0x02. Sobel 算法
Sobel 也是很常用的一种轮廓识别的算法。
关于 Sobel 导数原理的介绍，可参考
-
Sobel 导数
以下是使用 Sobel 算法进行轮廓检测的代码和效果
import cv2.cv as cv
im=cv.LoadImage('img/building.png', cv.CV_LOAD_IMAGE_GRAYSCALE)
sobx = cv.CreateImage(cv.GetSize(im), cv.IPL_DEPTH_16S, 1)
cv.Sobel(im, sobx, 1, 0, 3) #Sobel with x-order=1
soby = cv.CreateImage(cv.GetSize(im), cv.IPL_DEPTH_16S, 1)
cv.Sobel(im, soby, 0, 1, 3) #Sobel withy-oder=1
cv.Abs(sobx, sobx)
cv.Abs(soby, soby)
result = cv.CloneImage(im)
cv.Add(sobx, soby, result) #Add the two results together.
cv.Threshold(result, result, 100, 255, cv.CV_THRESH_BINARY_INV)
cv.ShowImage('Image', im)
cv.ShowImage('Result', result)
cv.WaitKey(0)处理之后效果图（感觉比Laplace效果要好些）
0x03. cv.MorphologyEx
cv.MorphologyEx 是另外一种边缘检测的算法
import cv2.cv as cv
image=cv.LoadImage('img/build.png', cv.CV_LOAD_IMAGE_GRAYSCALE)
#Get edges
morphed = cv.CloneImage(image)
cv.MorphologyEx(image, morphed, None, None, cv.CV_MOP_GRADIENT) # Apply a dilate - Erode
cv.Threshold(morphed, morphed, 30, 255, cv.CV_THRESH_BINARY_INV)
cv.ShowImage("Image", image)
cv.ShowImage("Morphed", morphed)
cv.WaitKey(0)
0x04. Canny 边缘检测
Canny 算法可以对直线边界做出很好的检测；
关于 Canny 算法原理的描述，可参考：
-
Canny 边缘检测
import cv2.cv as cv
import math
im=cv.LoadImage('img/road.png', cv.CV_LOAD_IMAGE_GRAYSCALE)
pi = math.pi #Pi value
dst = cv.CreateImage(cv.GetSize(im), 8, 1)
cv.Canny(im, dst, 200, 200)
cv.Threshold(dst, dst, 100, 255, cv.CV_THRESH_BINARY)
#---- Standard ----
color_dst_standard = cv.CreateImage(cv.GetSize(im), 8, 3)
cv.CvtColor(im, color_dst_standard, cv.CV_GRAY2BGR)#Create output image in RGB to put red lines
lines = cv.HoughLines2(dst, cv.CreateMemStorage(0), cv.CV_HOUGH_STANDARD, 1, pi / 180, 100, 0, 0)
for (rho, theta) in lines[:100]:
a = math.cos(theta) #Calculate orientation in order to print them
b = math.sin(theta)
x0 = a * rho
y0 = b * rho
pt1 = (cv.Round(x0 + 1000*(-b)), cv.Round(y0 + 1000*(a)))
pt2 = (cv.Round(x0 - 1000*(-b)), cv.Round(y0 - 1000*(a)))
cv.Line(color_dst_standard, pt1, pt2, cv.CV_RGB(255, 0, 0), 2, 4) #Draw the line
#---- Probabilistic ----
color_dst_proba = cv.CreateImage(cv.GetSize(im), 8, 3)
cv.CvtColor(im, color_dst_proba, cv.CV_GRAY2BGR) # idem
rho=1
theta=pi/180
thresh = 50
minLength= 120 # Values can be changed approximately to fit your image edges
maxGap= 20
lines = cv.HoughLines2(dst, cv.CreateMemStorage(0), cv.CV_HOUGH_PROBABILISTIC, rho, theta, thresh, minLength, maxGap)
for line in lines:
cv.Line(color_dst_proba, line[0], line[1], cv.CV_RGB(255, 0, 0), 2, 8)
cv.ShowImage('Image',im)
cv.ShowImage("Cannied", dst)
cv.ShowImage("Hough Standard", color_dst_standard)
cv.ShowImage("Hough Probabilistic", color_dst_proba)
cv.WaitKey(0)原图
使用 Canny 算法处理之后
标记出标准的直线
标记出所有可能的直线
0x05. 轮廓检测
OpenCV 提供一个 FindContours 函数可以用来检测出图像中对象的轮廓：
import cv2.cv as cv
orig = cv.LoadImage('img/build.png', cv.CV_LOAD_IMAGE_COLOR)
im = cv.CreateImage(cv.GetSize(orig), 8, 1)
cv.CvtColor(orig, im, cv.CV_BGR2GRAY)
#Keep the original in colour to draw contours in the end
cv.Threshold(im, im, 128, 255, cv.CV_THRESH_BINARY)
cv.ShowImage("Threshold 1", im)
element = cv.CreateStructuringElementEx(5*2+1, 5*2+1, 5, 5, cv.CV_SHAPE_RECT)
cv.MorphologyEx(im, im, None, element, cv.CV_MOP_OPEN) #Open and close to make appear contours
cv.MorphologyEx(im, im, None, element, cv.CV_MOP_CLOSE)
cv.Threshold(im, im, 128, 255, cv.CV_THRESH_BINARY_INV)
cv.ShowImage("After MorphologyEx", im)
# --------------------------------
vals = cv.CloneImage(im) #Make a clone because FindContours can modify the image
contours=cv.FindContours(vals, cv.CreateMemStorage(0), cv.CV_RETR_LIST, cv.CV_CHAIN_APPROX_SIMPLE, (0,0))
_red = (0, 0, 255); #Red for external contours
_green = (0, 255, 0);# Gren internal contours
levels=2 #1 contours drawn, 2 internal contours as well, 3 ...
cv.DrawContours (orig, contours, _red, _green, levels, 2, cv.CV_FILLED) #Draw contours on the colour image
cv.ShowImage("Image", orig)
cv.WaitKey(0)效果图：
原图
识别结果
0x06. 边界检测
import cv2.cv as cv
im = cv.LoadImage("img/build.png", cv.CV_LOAD_IMAGE_GRAYSCALE)
dst_32f = cv.CreateImage(cv.GetSize(im), cv.IPL_DEPTH_32F, 1)
neighbourhood = 3
aperture = 3
k = 0.01
maxStrength = 0.0
threshold = 0.01
nonMaxSize = 3
cv.CornerHarris(im, dst_32f, neighbourhood, aperture, k)
minv, maxv, minl, maxl = cv.MinMaxLoc(dst_32f)
dilated = cv.CloneImage(dst_32f)
cv.Dilate(dst_32f, dilated) # By this way we are sure that pixel with local max value will not be changed, and all the others will
localMax = cv.CreateMat(dst_32f.height, dst_32f.width, cv.CV_8U)
cv.Cmp(dst_32f, dilated, localMax, cv.CV_CMP_EQ) #compare allow to keep only non modified pixel which are local maximum values which are corners.
threshold = 0.01 * maxv
cv.Threshold(dst_32f, dst_32f, threshold, 255, cv.CV_THRESH_BINARY)
cornerMap = cv.CreateMat(dst_32f.height, dst_32f.width, cv.CV_8U)
cv.Convert(dst_32f, cornerMap) #Convert to make the and
cv.And(cornerMap, localMax, cornerMap) #Delete all modified pixels
radius = 3
thickness = 2
l = []
for x in range(cornerMap.height): #Create the list of point take all pixel that are not 0 (so not black)
for y in range(cornerMap.width):
if cornerMap[x,y]:
l.append((y,x))
for center in l:
cv.Circle(im, center, radius, (255,255,255), thickness)
cv.ShowImage("Image", im)
cv.ShowImage("CornerHarris Result", dst_32f)
cv.ShowImage("Unique Points after Dilatation/CMP/And", cornerMap)
cv.WaitKey(0)