Oracle Solaris 11 配置网络

1.从自动网络配置模式转换为手动配置模式

   验证NCP

 netadm list

 netadm enable -p ncp DefaultFixed

2.确认DefaultFixed模式可用

 netadm list
 netadm: DefaultFixed NCP is enabled;
 automatic network management is not available.
 netadm list' is only supported when automatic network management is active.

3.确认要配置的接口

 # dladm show-phys

4.配置net0

 # ipadm create-ip net0
 # ipadm create-addr -T static -a 192.168.56.200/24 net0/v4
 # ipadm show-addr

5.配置网关

 # route -p add default 12.34.56.1

6.配置DNS

 root@solaris:~# svccfg -s dns/client
 svc:/network/dns/client> setprop config/nameserver = (8.8.8.8 8.8.4.4)
 svc:/network/dns/client> listprop config
 config                      application
 config/value_authorization astring     solaris.smf.value.name-service.dns.client
 config/nameserver          net_address 8.8.8.8 8.8.4.4
 svc:/network/dns/client> exit
 root@solaris:~#
 root@solaris:~# svcadm refresh dns/client
 root@solaris:~# svcadm restart dns/client

7.配置name-server

 root@solaris:~# svccfg -s name-service/switch
 svc:/system/name-service/switch> setprop config/host = "files dns"
 svc:/system/name-service/switch> listprop config
 config                      application
 config/default             astring     files
 config/value_authorization astring     solaris.smf.value.name-service.switch
 config/printer             astring     "user files"
 config/host                astring     "files dns"
 svc:/system/name-service/switch> exit

8.最关键一步验证

 root@solaris:~# ping google.com
 google.com is alive

通过这些步骤，solaris11终于可以上网了