Using Create2(Roomba 620) as your turtlebot driving base.

This message has been posted on goolge group: https://groups.google.com/forum/#!topic/irobot-create-forum/rZ3J9IAGDGo
You can check out the newest posts there!

Problem/Solution: Using Create2(Roomba 620) as your turtlebot driving base.

使用 iRobot Create 2 作为 Turtlebot 的驱动底盘  see this blog: ROS 进阶学习笔记(14) - About driving your iRobot Roomba/Create

[Problem]:


I met the incompatibility problem when I was trying to build and test my own_turtlebot which is using iRobot Create 2(Roomba 620). When I use the file "turtlebot_minimal_create. launch" offered by rbx('ROS by Example_Hydro_vol1') book. When I was doing the linear and angular calibration as the book described, I meet unexpectable driving actions made by my create2.

As the writor of rbx_hydro_vol1 book was using original Turtlebot which is using iRobot Create as the driving base, however, iRobot Create is out of sale and has been replaced by iRobot_Create_2 as I know.

iRobot co. seems not to offer iRobot_Create, so We can only buy iRobot_Create_2 to build our non-original-turtlebot. Thus, we can not use the launch file offered by rbx book directly.

[Solution]

Looking into the file "turtlebot_minimal_create. launch", we can find it refered a file "tb_create_mobile_base.launch. xml". This file defined parameters about driving our base.

Add or modify the parameter definition lines as below:
    <param name = "has_gyro" value = "false" />   <!--Create2 has no gyro sensor-->
   
<param name = "turtlebot_node/odom_angular_scale_correction" value = "1.0" />
   
<param name = "turtlebot_node/odom_linear_scale_correction" value = "1.0" />
   
<param name = "robot_type" value = "roomba" /> <!--"create", or "roomba" for Create2-->

Here, param " robot_type" will make the file "robot_types.py" know which name,baudrate,sensor_handler, wheel_separation to choose. You can ran command below to find out the file"robot_types.py" in you Ubuntu+ROS system:
   $ cd / && sudo find -name "robot_types.py"

So, on my understanding of the rbx book, the driving base (Create2) will only use ros topic /odomas the driving/navigation information. If you added gyro_sensor(like ADXR652) into this driving system(based on Create2), please share your solutions/steps with us. I think the writer and me will appreciate that!

[Contact]

If you meet any new thoughts/ideas/solutions/ problems about this topic, welcome to join here and discuss about it. Thanks!!

你可能感兴趣的:(Using Create2(Roomba 620) as your turtlebot driving base.)