HDU 1240 Asteroids! （三维BFS）
Asteroids!
Time Limit: 2000/1000 MS (Java/Others) Memory Limit: 65536/32768 K (Java/Others)Total Submission(s): 4704 Accepted Submission(s): 3030
Problem Description
You're in space.
You want to get home.
There are asteroids.
You don't want to hit them.
You want to get home.
There are asteroids.
You don't want to hit them.
Input
Input to this problem will consist of a (non-empty) series of up to 100 data sets. Each data set will be formatted according to the following description, and there will be no blank lines separating data sets.
A single data set has 5 components:
Start line - A single line, "START N", where 1 <= N <= 10.
Slice list - A series of N slices. Each slice is an N x N matrix representing a horizontal slice through the asteroid field. Each position in the matrix will be one of two values:
'O' - (the letter "oh") Empty space
'X' - (upper-case) Asteroid present
Starting Position - A single line, "A B C", denoting the <A,B,C> coordinates of your craft's starting position. The coordinate values will be integers separated by individual spaces.
Target Position - A single line, "D E F", denoting the <D,E,F> coordinates of your target's position. The coordinate values will be integers separated by individual spaces.
End line - A single line, "END"
The origin of the coordinate system is <0,0,0>. Therefore, each component of each coordinate vector will be an integer between 0 and N-1, inclusive.
The first coordinate in a set indicates the column. Left column = 0.
The second coordinate in a set indicates the row. Top row = 0.
The third coordinate in a set indicates the slice. First slice = 0.
Both the Starting Position and the Target Position will be in empty space.
A single data set has 5 components:
Start line - A single line, "START N", where 1 <= N <= 10.
Slice list - A series of N slices. Each slice is an N x N matrix representing a horizontal slice through the asteroid field. Each position in the matrix will be one of two values:
'O' - (the letter "oh") Empty space
'X' - (upper-case) Asteroid present
Starting Position - A single line, "A B C", denoting the <A,B,C> coordinates of your craft's starting position. The coordinate values will be integers separated by individual spaces.
Target Position - A single line, "D E F", denoting the <D,E,F> coordinates of your target's position. The coordinate values will be integers separated by individual spaces.
End line - A single line, "END"
The origin of the coordinate system is <0,0,0>. Therefore, each component of each coordinate vector will be an integer between 0 and N-1, inclusive.
The first coordinate in a set indicates the column. Left column = 0.
The second coordinate in a set indicates the row. Top row = 0.
The third coordinate in a set indicates the slice. First slice = 0.
Both the Starting Position and the Target Position will be in empty space.
Output
For each data set, there will be exactly one output set, and there will be no blank lines separating output sets.
A single output set consists of a single line. If a route exists, the line will be in the format "X Y", where X is the same as N from the corresponding input data set and Y is the least number of moves necessary to get your ship from the starting position to the target position. If there is no route from the starting position to the target position, the line will be "NO ROUTE" instead.
A move can only be in one of the six basic directions: up, down, left, right, forward, back. Phrased more precisely, a move will either increment or decrement a single component of your current position vector by 1.
A single output set consists of a single line. If a route exists, the line will be in the format "X Y", where X is the same as N from the corresponding input data set and Y is the least number of moves necessary to get your ship from the starting position to the target position. If there is no route from the starting position to the target position, the line will be "NO ROUTE" instead.
A move can only be in one of the six basic directions: up, down, left, right, forward, back. Phrased more precisely, a move will either increment or decrement a single component of your current position vector by 1.
Sample Input
START 1 O 0 0 0 0 0 0 END START 3 XXX XXX XXX OOO OOO OOO XXX XXX XXX 0 0 1 2 2 1 END START 5 OOOOO OOOOO OOOOO OOOOO OOOOO OOOOO OOOOO OOOOO OOOOO OOOOO XXXXX XXXXX XXXXX XXXXX XXXXX OOOOO OOOOO OOOOO OOOOO OOOOO OOOOO OOOOO OOOOO OOOOO OOOOO 0 0 0 4 4 4 END
Sample Output
1 0 3 4 NO ROUTE
Source
South Central USA 2001
题解：有一个三维立体图，x代表行星，o代表太空，然后给你一个三维的起点和终点，求起点到终点的最短距离，最后到的一定是行星，不能留在太空，途中不能撞到其他行星。
三维的BFS。。。
AC代码：
#include<iostream>
#include<cstring>
#include<queue>
#include<stdio.h>
#define max 11
using namespace std;
char map[max][max][max];
int vis[max][max][max];
int n;
int st1,st2,st3,en1,en2,en3;
int step;
struct Q
{
int x,y,z;
int step;
};
void bfs()
{
step=0;
memset(vis,0,sizeof(vis));
queue<Q> q;
Q temp,now;
temp.x=st1;
temp.y=st2;
temp.z=st3;
temp.step=0;
vis[temp.x][temp.y][temp.z]=1;
q.push(temp);
int i,j,k;
int x[6]={ 1,-1, 0, 0, 0, 0};
int y[6]={ 0, 0, 1, -1, 0, 0};
int z[6]={ 0, 0, 0, 0, 1, -1};
while(!q.empty())
{
now=q.front();
q.pop();
int a,b,c;
for(i=0;i<6;i++)
{
a=now.x+x[i];
b=now.y+y[i];
c=now.z+z[i];
if(a==en1&&b==en2&&c==en3)
{
step=now.step+1;
return;
}
if(a>=0&&b>=0&&c>=0&&a<n&&b<n&&c<n&&vis[a][b][c]==0&&map[a][b][c]=='O')
{
vis[a][b][c]=1;
temp.x=a;
temp.y=b;
temp.z=c;
temp.step=now.step+1;
q.push(temp);
}
}
}
}
int main()
{
int i,j;
char s[10];
while(scanf("%s%d",s,&n)!=EOF)
{
memset(map,0,sizeof(map));
for(i=0;i<n;i++)
{
for(j=0;j<n;j++)
{
getchar();
scanf("%s",map[i][j]);
}
}
scanf("%d%d%d%d%d%d",&st1,&st2,&st3,&en1,&en2,&en3);
getchar();
scanf("%s",s);
if(st1==en1&&st2==en2&&st3==en3)
{
printf("%d %d\n",n,0);
continue;
}
bfs();
if(step)
{
printf("%d %d\n",n,step);
}
else{
printf("NO ROUTE\n");
}
}
return 0;
}
discuss上的参考更容易明白：
#include<stdio.h>
#include<queue>
using namespace std;
char map[10][10][10];
int startx,starty,startz,endx,endy,endz;
int n;
struct node
{
int x,y,z,step;
friend bool operator <(node a,node b)
{
return a.step>b.step;
}
};
void bfs(int x1,int y1,int z1,int x2,int y2,int z2)
{
int k;
int move[6][3]={{0,0,1},{0,0,-1},{0,1,0},{0,-1,0},{1,0,0},{-1,0,0}};
node now,next;
priority_queue<node>q;
now.x=x1;
now.y=y1;
now.z=z1;
now.step=0;
map[now.x][now.y][now.z]='X';
q.push(now);
while(!q.empty())
{
next=q.top();
q.pop();
if(next.x==x2&&next.y==y2&&next.z==z2)
{
printf("%d %d\n",n,next.step);
return ;
}
for(k=0;k<6;k++)
{
now.x=next.x+move[k][0];
now.y=next.y+move[k][1];
now.z=next.z+move[k][2];
if(now.x>=0&&now.x<n&&now.y>=0&&now.y<n&&now.z>=0&&now.z<n&&map[now.x][now.y][now.z]=='O')
{
now.step=next.step+1;
map[now.x][now.y][now.z]='X';
q.push(now);
}
}
}
printf("NO ROUTE\n");
}
int main()
{
int i,j,k;
char s[10];
while(scanf("%s %d",s,&n)!=EOF)
{
getchar();
for(i=0;i<n;i++)
{
for(j=0;j<n;j++)
{
for(k=0;k<n;k++)
{
scanf("%c",&map[i][j][k]);
}
getchar();
}
getchar();
}
scanf("%d%d%d%d%d%d",&startx,&starty,&startz,&endx,&endy,&endz);
scanf("%s",s);
bfs(startx,starty,startz,endx,endy,endz);
}
return 0;
}