CentOS 7.x 下配置iSCSI网络存储
一、iSCSI简介
- iSCSI（internet SCSI）技术由IBM公司研究开发，是一个供硬件设备使用的、可以在IP协议的上层运行的SCSI指令集，这种指令集合可以实现在IP网络上运行SCSI协议，使其能够在诸如高速千兆以太网上进行路由选择。iSCSI技术是一种新储存技术，该技术是将现有SCSI接口与以太网络(Ethernet)技术结合，使服务器可与使用IP网络的储存装置互相交换资料。
- iSCSI是一种基于TCP/IP 的协议，用来建立和管理IP存储设备、主机和客户机等之间的相互连接，并创建存储区域网络（SAN）。SAN
使得SCSI 协议应用于高速数据传输网络成为可能，这种传输以数据块级别（block-level）在多个数据存储网络间进行。SCSI
结构基于C/S模式，其通常应用环境是：设备互相靠近，并且这些设备由SCSI 总线连接。 - iSCSI 的主要功能是在TCP/IP 网络上的主机系统（启动器 initiator）和存储设备（目标器
- 完整的iSCSI系统的拓扑结构如下：
- 备注：上面一段内容出处：http://www.cnblogs.com/mchina/p/centos-iscsi-network-storage.html
二、实验环境
操作系统：CentOS Linux release 7.2.1511 (Core)
iSCSI Target：10.1.1.56 / vdevops.org
iSCSI Initiator：10.1.1.53 / linuxprobe.org
防火墙已关闭/iptables: Firewall is not running.
SELINUX已禁用：SELINUX=disabled
三、配置iSCSI Target
首先安装管理工具
[root@vdevops ~]# yum -y install targetcli配置iSCSI目标。
例如，在/ iscsi_disks目录下创建磁盘映像并将其设置为SCSI设备
#进入管理控制台
[root@vdevops ~]# targetcli
Warning: Could not load preferences file /root/.targetcli/prefs.bin.
targetcli shell version 2.1.fb41
Copyright 2011-2013 by Datera, Inc and others.
For help on commands, type 'help'.
#在/iscsi_disks/disk01.img上使用2G创建名为“disk01”的磁盘映像
/> cd backstores/fileio
/backstores/fileio> create disk01 /iscsi_disks/disk01.img 2G
Created fileio disk01 with size 2147483648
/backstores/fileio> cd /iscsi
#创建目标
/iscsi> create iqn.2016-10.vdevops.org:storage.target00
Created target iqn.2016-10.vdevops.org:storage.target00.
Created TPG 1.
Global pref auto_add_default_portal=true
Created default portal listening on all IPs (0.0.0.0), port 3260.
/iscsi> cd iqn.2016-10.vdevops.org:storage.target00/tpg1/luns
#设置 luns
/iscsi/iqn.20...t00/tpg1/luns> create /backstores/fileio/disk01
Created LUN 0.
/iscsi/iqn.20...t00/tpg1/luns> cd ../acls
/iscsi/iqn.20...t00/tpg1/acls> create iqn.2016-10.vdevops.org:vdevops.org
Created Node ACL for iqn.2016-10.vdevops.org:vdevops.org
Created mapped LUN 0.
#设置ACL（它是允许连接的启动器的IQN）
/iscsi/iqn.20...t00/tpg1/acls> cd iqn.2016-10.vdevops.org:vdevops.org/
#设置用于验证的UserID
/iscsi/iqn.20...g:vdevops.org> set auth userid=username
Parameter userid is now 'username'.
/iscsi/iqn.20...g:vdevops.org> set auth password=password
Parameter password is now 'password'.
/iscsi/iqn.20...g:vdevops.org> exit
Global pref auto_save_on_exit=true
Last 10 configs saved in /etc/target/backup.
Configuration saved to /etc/target/saveconfig.json
[root@vdevops ~]# ss -napt | grep 3260
LISTEN 0 256 *:3260 *:*
[root@vdevops ~]# systemctl enable target
Created symlink from /etc/systemd/system/multi-user.target.wants/target.service to /usr/lib/systemd/system/target.service.
[root@vdevops ~]# firewall-cmd --add-service=iscsi-target --permanent
success
[root@vdevops ~]# firewall-cmd --reload
success - 使用iSCSI配置存储服务器
这是使用scsi-target-utils配置iSCSI目标的示例
[1] 安装 scsi-target-utils.
# 使用EPEL源安装
[root@vdevops ~]# yum --enablerepo=epel -y install scsi-target-utils
[2]配置iSCSI目标。
例如，在[/ iscsi_disks]目录下创建磁盘映像并将其设置为共享磁盘。
# 创建硬盘镜像
[root@vdevops ~]# mkdir /iscsi_disks #无需重复创建
[root@vdevops ~]# dd if=/dev/zero of=/iscsi_disks/disk01.img count=0 bs=1 seek=2G #同样无需重复创建
[root@vdevops iscsi_disks]# vi /etc/tgt/targets.conf
<target iqn.2016-10.vdevops.org:target00>
# provided devicce as a iSCSI target
#
backing-store /iscsi_disks/disk01.img
# iSCSI Initiator's IP address you allow to connect
#
initiator-address 10.1.1.53
# authentication info ( set anyone you like for "username", "password" )
#
incominguser username password
</target>
[3]如果SElinux为enable状态, 改变SElinux类型.
[root@vdevops ~]# chcon -R -t tgtd_var_lib_t /iscsi_disks
[root@vdevops ~]# semanage fcontext -a -t tgtd_var_lib_t /iscsi_disks
[4]如果防火墙开启，允许iSCSI Target服务
[root@vdevops ~]# firewall-cmd --add-service=iscsi-target --permanent
success
[root@vdevops ~]# firewall-cmd --reload
success - 启动 tgtd并验证状态
[root@vdevops ~]# systemctl start tgtd [root@vdevops ~]# systemctl status tgtd ● tgtd.service - tgtd iSCSI target daemon Loaded: loaded (/usr/lib/systemd/system/tgtd.service; disabled; vendor preset: disabled)
Active: active (running) since Mon 2016-10-31 20:46:10 CST; 7s ago
Process: 2860 ExecStartPost=/usr/sbin/tgtadm --op update --mode sys --name State -v ready (code=exited, status=0/SUCCESS)
Process: 2830 ExecStartPost=/usr/sbin/tgt-admin -e -c $TGTD_CONFIG (code=exited, status=0/SUCCESS)
Process: 2829 ExecStartPost=/usr/sbin/tgtadm --op update --mode sys --name State -v offline (code=exited, status=0/SUCCESS)
Process: 2828 ExecStartPost=/bin/sleep 5 (code=exited, status=0/SUCCESS)
Main PID: 2827 (tgtd)
CGroup: /system.slice/tgtd.service
└─2827 /usr/sbin/tgtd -f
Oct 31 20:46:04 vdevops.org systemd[1]: Starting tgtd iSCSI target daemon...
Oct 31 20:46:04 vdevops.org tgtd[2827]: tgtd: iscsi_tcp_init_portal(347) unable to bind server socket, Address already in use
Oct 31 20:46:04 vdevops.org tgtd[2827]: tgtd: iser_ib_init(3436) Failed to initialize RDMA; load kernel modules? Oct 31 20:46:04 vdevops.org tgtd[2827]: tgtd: work_timer_start(146) use timer_fd based scheduler Oct 31 20:46:04 vdevops.org tgtd[2827]: tgtd: bs_init_signalfd(267) could not open backing-store module directory /usr/lib64/tgt/backing-store Oct 31 20:46:04 vdevops.org tgtd[2827]: tgtd: bs_init(386) use signalfd notification Oct 31 20:46:10 vdevops.org tgtd[2827]: tgtd: device_mgmt(246) sz:29 params:path=/iscsi_disks/disk01.img Oct 31 20:46:10 vdevops.org tgtd[2827]: tgtd: bs_thread_open(408) 16 Oct 31 20:46:10 vdevops.org systemd[1]: Started tgtd iSCSI target daemon. Hint: Some lines were ellipsized, use -l to show in full. [root@vdevops ~]# systemctl enable tgtd Created symlink from /etc/systemd/system/multi-user.target.wants/tgtd.service to /usr/lib/systemd/system/tgtd.service. #查看状态 [root@vdevops ~]# tgtadm --mode target --op show Target 1: iqn.2016-10.world.srv:target00 System information: Driver: iscsi State: ready I_T nexus information: LUN information: LUN: 0 Type: controller SCSI ID: IET 00010000 SCSI SN: beaf10 Size: 0 MB, Block size: 1 Online: Yes Removable media: No Prevent removal: No Readonly: No SWP: No Thin-provisioning: No Backing store type: null Backing store path: None Backing store flags: LUN: 1 Type: disk SCSI ID: IET 00010001 SCSI SN: beaf11 Size: 2147 MB, Block size: 512 Online: Yes Removable media: No Prevent removal: No Readonly: No SWP: No Thin-provisioning: No Backing store type: rdwr Backing store path: /iscsi_disks/disk01.img Backing store flags: Account information: username ACL information: 10.1.1.53- 配置iSCSI启动器
#使用EPEL安装iscsi-initiator-utils
[root@linuxprobe ~]# yum -y install iscsi-initiator-utils
[root@linuxprobe ~]# vi /etc/iscsi/initiatorname.iscsi
# change to the same IQN you set on the iSCSI target server
InitiatorName=iqn.2016-10.vdevops.org:vdevops.org
[root@linuxprobe ~]# vi /etc/iscsi/iscsid.conf
# line 57: 取消注释
node.session.auth.authmethod = CHAP
# line 61,62: 取消注释 and specify the username and password you set on the iSCSI target server
node.session.auth.username = username
node.session.auth.password = password
# 发现target
[root@linuxprobe ~]# iscsiadm -m discovery -t sendtargets -p 10.1.1.56
10.1.1.56:3260,1 iqn.2016-10.vdevops.org:storage.target00
[root@linuxprobe ~]# iscsiadm -m node -o show
# BEGIN RECORD 6.2.0.873-33.2
node.name = iqn.2016-10.vdevops.org:storage.target00
node.tpgt = 1
node.startup = automatic
node.leading_login = No
...
...
node.conn[0].iscsi.MaxXmitDataSegmentLength = 0
node.conn[0].iscsi.MaxRecvDataSegmentLength = 262144
node.conn[0].iscsi.HeaderDigest = None
node.conn[0].iscsi.IFMarker = No
node.conn[0].iscsi.OFMarker = No
# END RECORD
#登录target
[root@linuxprobe ~]# iscsiadm -m node --login
Logging in to [iface: default, target: iqn.2016-10.vdevops.org:storage.target00, portal: 10.1.1.56,3260] (multiple)
Login to [iface: default, target: iqn.2016-10.vdevops.org:storage.target00, portal: 10.1.1.56,3260] successful.
#确认连接状态
[root@linuxprobe ~]# iscsiadm -m session -o show
tcp: [1] 10.1.1.56:3260,1 iqn.2016-10.vdevops.org:storage.target00 (non-flash)
#确认分区状况
[root@linuxprobe ~]# cat /proc/partitions
major minor #blocks name
2 0 4 fd0
8 0 20971520 sda
8 1 512000 sda1
8 2 20458496 sda2
11 0 4228096 sr0
253 0 18317312 dm-0
253 1 2097152 dm-1
8 16 2097152 sdb
#从目标服务器提供的添加的新设备为“sdb”- 设置iSCSI设备后，在启动器上配置如下所示
#创建标签
[root@linuxprobe ~]# parted --script /dev/sdb "mklabel msdos"
# 创建分区
[root@linuxprobe ~]# parted --script /dev/sdb "mkpart primary 0% 100%"
# 格式化分区
[root@linuxprobe ~]# mkfs.xfs -i size=1024 -s size=4096 /dev/sdb1
meta-data=/dev/sdb1 isize=1024 agcount=4, agsize=130560 blks
= sectsz=4096 attr=2, projid32bit=1
= crc=0 finobt=0
data = bsize=4096 blocks=522240, imaxpct=25
= sunit=0 swidth=0 blks
naming =version 2 bsize=4096 ascii-ci=0 ftype=0
log =internal log bsize=4096 blocks=2560, version=2
= sectsz=4096 sunit=1 blks, lazy-count=1
realtime =none extsz=4096 blocks=0, rtextents=0
# 挂载分区
[root@linuxprobe ~]# mount /dev/sdb1 /mnt/
# 查看系统挂载
[root@linuxprobe ~]# df -hT
Filesystem Type Size Used Avail Use% Mounted on
/dev/mapper/centos-root xfs 18G 1.9G 16G 11% /
devtmpfs devtmpfs 483M 0 483M 0% /dev
tmpfs tmpfs 493M 0 493M 0% /dev/shm
tmpfs tmpfs 493M 6.7M 487M 2% /run
tmpfs tmpfs 493M 0 493M 0% /sys/fs/cgroup
/dev/sda1 xfs 497M 125M 373M 26% /boot
tmpfs tmpfs 99M 0 99M 0% /run/user/0
**/dev/sdb1 xfs 2.0G 33M 2.0G 2% /mnt**到此，我们可以看到ISCSI配置完成，可以正常使用。
- ISCSI百度百科：http://baike.baidu.com/link?url=-OA1le_DbAh5ybVq1ZBTbPHJqQb5-jma5vhKR5nCAC7C11UDSwNn_6mPYj0AiABrm8OM2MoExN__9GvzvhVg8K