introduce myself
First of all, I will talk about my education experience. I got Science bachelor degree from Guilin University of Electronic Technology in 2009, majored in Optical Information Science and Technology. I passed the postgraduate exam of Shenzhen University in 2012, Majoring in Electronic Science and Communication Technology in the college of Information Engineering. And I will graduate with the master degree at the end of this year. I have excellent practical knowledge after those education and 6-year working experience.
Following, I would like to introduce my working experience. From June 2009, I worked in the R&D Department in Guangzhou Flyaudio Co. , Ltd. The product is Auto navigation systems. Bluetooth phone and music playback is added on navigation, I Wrote interface protocols of Bluetooth module using ARM7 of NXP. Old product program upgrade and improvement online by using VC plus plus.
Following that I went to Cellwiz as a FAE in the Marketing Department. It’s IDH which customized the primary board for in Automobile Electric field. Including the car dashboard, automobile anti-theft, Tire pressure Monitoring System etc. it is an agent of Melexis, including Hall-effect Position Sensors, Motor Control ICs, Optical sensors etc. I do presentation and promote our solution, teach customers design their own Board by using our solutions to reduce development time. Cooperated customers included Sany, Liuzhou auto, Yuchai, etc. I am familiar with Freescale and Microchip’8-bitto 16-bit Microprocessor, a full range of Melexis products.
As a FAE , I joined the GFEi in April 2012，Because of hard work I was promoted as the assistant FAE manager more than one year ago. The company is agent of many vendor, a subsidiary of Galaxy Far East Cooperation, is a technology oriented electronic componentsdistributor.
I independently assist the sales and marketing team to do pre-sales workwith FTDI\XMOS\Genesys\Everspin\Sitime, Provide support and training necessary to customers, prototype & demo board check, software programming, troubleshoot in field, write up applications note. As a FAE Manager，I am responsible for mainland China to form a technical support team, division of labor, determine strategy, write up product presentation and applications note， control teamwork load and project completion versus plan.
Let me talk about the product category what I am responsible for：
I am most familiar with product is all kinds of MCU Series, including conventional MCU, such as 51 series, ARM Cortex-M series, especially I know XMOS, a parallel multitasking Microprocessor, Similar to the FPGA，It can be configured to support a wide range of interfaces and peripherals, and responds much faster than conventional MCU to deliver precise real-time performance. market segments including USB Audio solution 、industrial Networking and Protocol convertors. I attended ARM Cortex-M series embedded microcontroller architecture training course of Torch education, third party of ARM Company last year. Compared with the application, it is a higher level of knowledge.
USB connectivity，principle of the USB protocol, including USB convert to serial/SPI/I2C,USB Hub , USB card reader，USB charge solution. Those products have applications including industrial, PC peripheral, medical,telecom, energy infrastructure, etc.
Graphic Controller, pixels up to 512 x 512 pixels, it is used in Human Machine Interfaces and Smart home field.
Storage class chip. Everspin is manufacturer of magnetic RAM, MRAM is the industry's fast non-volatile memory and provides unlimited endurance, unmatched reliability, 10-year-plus data retention.
Well, for my main personal qualities required, are ready to work hard, ability to study on my own. I was crazy about the design of electronic products, in college, I was often bed late to study it without anyone reminding me. I am familiar with applications to consumer electronics, automotive and industrial control circuitry. I’m well in Team management and communication skills.
What’s more, I’m initiative and independent. I always believe that love can make our work well, don't complain about investment of time and effort, the work perfectly.
Following, I would like to introduce my working experience. From June 2009, I worked in the R&D Department in Guangzhou Flyaudio Co. , Ltd. The product is Auto navigation systems. Bluetooth phone and music playback is added on navigation, I Wrote interface protocols of Bluetooth module using ARM7 of NXP. Old product program upgrade and improvement online by using VC plus plus.
Following that I went to Cellwiz as a FAE in the Marketing Department. It’s IDH which customized the primary board for in Automobile Electric field. Including the car dashboard, automobile anti-theft, Tire pressure Monitoring System etc. it is an agent of Melexis, including Hall-effect Position Sensors, Motor Control ICs, Optical sensors etc. I do presentation and promote our solution, teach customers design their own Board by using our solutions to reduce development time. Cooperated customers included Sany, Liuzhou auto, Yuchai, etc. I am familiar with Freescale and Microchip’8-bitto 16-bit Microprocessor, a full range of Melexis products.
As a FAE , I joined the GFEi in April 2012，Because of hard work I was promoted as the assistant FAE manager more than one year ago. The company is agent of many vendor, a subsidiary of Galaxy Far East Cooperation, is a technology oriented electronic componentsdistributor.
I independently assist the sales and marketing team to do pre-sales workwith FTDI\XMOS\Genesys\Everspin\Sitime, Provide support and training necessary to customers, prototype & demo board check, software programming, troubleshoot in field, write up applications note. As a FAE Manager，I am responsible for mainland China to form a technical support team, division of labor, determine strategy, write up product presentation and applications note， control teamwork load and project completion versus plan.
Let me talk about the product category what I am responsible for：
I am most familiar with product is all kinds of MCU Series, including conventional MCU, such as 51 series, ARM Cortex-M series, especially I know XMOS, a parallel multitasking Microprocessor, Similar to the FPGA，It can be configured to support a wide range of interfaces and peripherals, and responds much faster than conventional MCU to deliver precise real-time performance. market segments including USB Audio solution 、industrial Networking and Protocol convertors. I attended ARM Cortex-M series embedded microcontroller architecture training course of Torch education, third party of ARM Company last year. Compared with the application, it is a higher level of knowledge.
USB connectivity，principle of the USB protocol, including USB convert to serial/SPI/I2C,USB Hub , USB card reader，USB charge solution. Those products have applications including industrial, PC peripheral, medical,telecom, energy infrastructure, etc.
Graphic Controller, pixels up to 512 x 512 pixels, it is used in Human Machine Interfaces and Smart home field.
Storage class chip. Everspin is manufacturer of magnetic RAM, MRAM is the industry's fast non-volatile memory and provides unlimited endurance, unmatched reliability, 10-year-plus data retention.
Well, for my main personal qualities required, are ready to work hard, ability to study on my own. I was crazy about the design of electronic products, in college, I was often bed late to study it without anyone reminding me. I am familiar with applications to consumer electronics, automotive and industrial control circuitry. I’m well in Team management and communication skills.
What’s more, I’m initiative and independent. I always believe that love can make our work well, don't complain about investment of time and effort, the work perfectly.