pandoc md 文件转化pdf(中文字体)

教程在网上一搜就有不过有些已经陈旧了．先做出以下修改
1. 下载pandoc

$ sudo apt-get install pandoc 

1. 下载xelatex引擎

$ sudo apt-get install texlive-xetex texlive-latex-recommended texlive-latex-extra 

1. 配置字体模板

\documentclass[$if(fontsize)$$fontsize$,$endif$$if(lang)$$lang$,$endif$$if(papersize)$$papersize$,$endif$]{$documentclass$}
\usepackage{geometry}       % 設定邊界
\geometry{
  top=1in,
  inner=1in,
  outer=1in,
  bottom=1in,
  headheight=3ex,
  headsep=2ex
}
\usepackage[T1]{fontenc}
\usepackage{lmodern}
\usepackage{amssymb,amsmath}
\usepackage{ifxetex,ifluatex}
\usepackage{fixltx2e} % provides \textsubscript
% use upquote if available, for straight quotes in verbatim environments
\IfFileExists{upquote.sty}{\usepackage{upquote}}{}
\ifnum 0\ifxetex 1\fi\ifluatex 1\fi=0 % if pdftex
  \usepackage[utf8]{inputenc}
$if(euro)$
  \usepackage{eurosym}
$endif$
\else % if luatex or xelatex
  \usepackage{fontspec}     % 允許設定字體
  \usepackage{xeCJK}        % 分開設置中英文字型
  \setCJKmainfont{WenQuanYi Micro Hei}  % 設定中文字型
  \setmainfont{Ubuntu}  % 設定英文字型
  \setromanfont{Ubuntu}     % 字型
  \setmonofont{Ubuntu}
  \linespread{1.2}\selectfont   % 行距
  \XeTeXlinebreaklocale "zh"    % 針對中文自動換行
  \XeTeXlinebreakskip = 0pt plus 1pt % 字與字之間加入0pt至1pt的間距，確保左右對整齊
  \parindent 0em        % 段落縮進
  \setlength{\parskip}{20pt}    % 段落之間的距離
  \ifxetex
    \usepackage{xltxtra,xunicode}
  \fi
  \defaultfontfeatures{Mapping=tex-text,Scale=MatchLowercase}
  \newcommand{\euro}{€}
$if(mainfont)$
    \setmainfont{$mainfont$}
$endif$
$if(sansfont)$
    \setsansfont{$sansfont$}
$endif$
$if(monofont)$
    \setmonofont{$monofont$}
$endif$
$if(mathfont)$
    \setmathfont{$mathfont$}
$endif$
\fi
% use microtype if available
\IfFileExists{microtype.sty}{\usepackage{microtype}}{}
$if(geometry)$
\usepackage[$for(geometry)$$geometry$$sep$,$endfor$]{geometry}
$endif$
$if(natbib)$
\usepackage{natbib}
\bibliographystyle{plainnat}
$endif$
$if(biblatex)$
\usepackage{biblatex}
$if(biblio-files)$
\bibliography{$biblio-files$}
$endif$
$endif$
$if(listings)$
\usepackage{listings}
$endif$
$if(lhs)$
\lstnewenvironment{code}{\lstset{language=Haskell,basicstyle=\small\ttfamily}}{}
$endif$
$if(highlighting-macros)$
$highlighting-macros$
$endif$
$if(verbatim-in-note)$
\usepackage{fancyvrb}
$endif$
$if(tables)$
\usepackage{longtable}
$endif$
$if(graphics)$
\usepackage{graphicx}
% We will generate all images so they have a width \maxwidth. This means
% that they will get their normal width if they fit onto the page, but
% are scaled down if they would overflow the margins.
\makeatletter
\def\maxwidth{\ifdim\Gin@nat@width>\linewidth\linewidth
\else\Gin@nat@width\fi}
\makeatother
\let\Oldincludegraphics\includegraphics
\renewcommand{\includegraphics}[1]{\Oldincludegraphics[width=\maxwidth]{#1}}
$endif$
\ifxetex
  \usepackage[setpagesize=false, % page size defined by xetex
              unicode=false, % unicode breaks when used with xetex
              xetex]{hyperref}
\else
  \usepackage[unicode=true]{hyperref}
\fi
\hypersetup{breaklinks=true,
            bookmarks=true,
            pdfauthor={$author-meta$},
            pdftitle={$title-meta$},
            colorlinks=true,
            urlcolor=$if(urlcolor)$$urlcolor$$else$blue$endif$,
            linkcolor=$if(linkcolor)$$linkcolor$$else$magenta$endif$,
            pdfborder={0 0 0}}
\urlstyle{same}  % don't use monospace font for urls
$if(links-as-notes)$
% Make links footnotes instead of hotlinks:
\renewcommand{\href}[2]{#2\footnote{\url{#1}}}
$endif$
$if(strikeout)$
\usepackage[normalem]{ulem}
% avoid problems with \sout in headers with hyperref:
\pdfstringdefDisableCommands{\renewcommand{\sout}{}}
$endif$
\setlength{\parindent}{0pt}
%\setlength{\parskip}{6pt plus 2pt minus 1pt}
\setlength{\emergencystretch}{3em}  % prevent overfull lines

\title{\huge 在OSX平台上的XeLaTeX中文測試} % 設置標題，使用巨大字體
\author{FoolEgg.com}        % 設置作者
\date{February 2013}        % 設置日期
\newcommand{\tightlist}{%
  \setlength{\itemsep}{0pt}\setlength{\parskip}{0pt}}
%\usepackage{titling}
%\setlength{\droptitle}{-8em}   % 將標題移動至頁面的上面

\usepackage{fancyhdr}
\usepackage{lastpage}
\pagestyle{fancyplain}

$if(numbersections)$
\setcounter{secnumdepth}{5}
$else$
\setcounter{secnumdepth}{0}
$endif$
$if(verbatim-in-note)$
\VerbatimFootnotes % allows verbatim text in footnotes
$endif$
$if(lang)$
\ifxetex
  \usepackage{polyglossia}
  \setmainlanguage{$mainlang$}
\else
  \usepackage[$lang$]{babel}
\fi
$endif$
$for(header-includes)$
$header-includes$
$endfor$

$if(title)$
\title{$title$}
$endif$
\author{$for(author)$$author$$sep$ \and $endfor$}
\date{$date$}

\begin{document}
$if(title)$
\maketitle
$endif$

$for(include-before)$
$include-before$

$endfor$
$if(toc)$
{
\hypersetup{linkcolor=black}
\setcounter{tocdepth}{$toc-depth$}
\tableofcontents
}
$endif$
$body$

$if(natbib)$
$if(biblio-files)$
$if(biblio-title)$
$if(book-class)$
\renewcommand\bibname{$biblio-title$}
$else$
\renewcommand\refname{$biblio-title$}
$endif$
$endif$
\bibliography{$biblio-files$}

$endif$
$endif$
$if(biblatex)$
\printbibliography$if(biblio-title)$[title=$biblio-title$]$endif$

$endif$
$for(include-after)$
$include-after$

$endfor$
\end{document}

1. 傻瓜化操作

pandoc *.md --latex-engine=xelatex --template=pandoc.template -o *.pdf