uva120 煎饼 （队列的使用）

The Problem
问题

Given a stack of pancakes, you are to write a program that indicates how the stack can be sorted so that the largest pancake is on the bottom and the smallest pancake is on the top. The size of a pancake is given by the pancake's diameter. All pancakes in a stack have different diameters.
给定一叠煎饼，你要写一个程序计算出如何才能使这叠煎饼自底向上由大至小的排列。给定煎饼的半径作为其尺寸，一叠煎饼的大小各不相同。

Sorting a stack is done by a sequence of pancake "flips". A flip consists of inserting a spatula between two pancakes in a stack and flipping (reversing) the pancakes on the spatula (reversing the sub-stack). A flip is specified by giving the position of the pancake on the bottom of the sub-stack to be flipped (relative to the whole stack). The pancake on the bottom of the whole stack has position 1 and the pancake on the top of a stack of n pancakes has position n.
为煎饼叠排序是通过一些列的“翻转”动作来完成的。一个翻转动作就是将一个小铲插到煎饼叠中的某两个煎饼之间，然后将小铲上面的所有煎饼翻转（倒转小铲上面的子栈）。每个翻转动作由其开始的位置给出，即小铲上面子栈中最底下一个煎饼的编号。整叠煎饼中最下面一个的位置为1，n个煎饼的叠中最上面一个的位置为n。

A stack is specified by giving the diameter of each pancake in the stack in the order in which the pancakes appear.
一个煎饼叠由一组表示其中各煎饼直径的数构成，它们排列的顺序就是给出的这些数的顺序。

For example, consider the three stacks of pancakes below (in which pancake 8 is the top-most pancake of the left stack):
比如下面三个煎饼叠（煎饼8是左边一叠的最上面的一个）

         8           7           2
         4           6           5
         6           4           8
         7           8           4
         5           5           6
         2           2           7

The stack on the left can be transformed to the stack in the middle via flip(3). The middle stack can be transformed into the right stack via the command flip(1).
左边一叠可以通过翻转第3个煎饼变成中间一叠的顺序。中间一叠可以通过翻转第1个煎饼变成右边一叠的顺序。

 

The Input
输入

The input consists of a sequence of stacks of pancakes. Each stack will consist of between 1 and 30 pancakes and each pancake will have an integer diameter between 1 and 100. The input is terminated by end-of-file. Each stack is given as a single line of input with the top pancake on a stack appearing first on a line, the bottom pancake appearing last, and all pancakes separated by a space.
输入包括一系列煎饼叠。每叠都由1到30个煎饼组成，并且每个煎饼的直径都在 1到100之间。输入由EOF结束。每叠煎饼独占一行，最上面的在行首，最下面的在行尾，各煎饼中间由空格隔开。

 

The Output
输出

For each stack of pancakes, the output should echo the original stack on one line, followed by some sequence of flips that results in the stack of pancakes being sorted so that the largest diameter pancake is on the bottom and the smallest on top. For each stack the sequence of flips should be terminated by a 0 (indicating no more flips necessary). Once a stack is sorted, no more flips should be made.
对应于每叠煎饼数据，必须在第一行输出原叠的内容，接下来输出一组翻转动作的序列，使得这一叠煎饼自底向上由大至小的排列。输出的每一组翻转动作序列都要由0来结束（表示不再进行翻转）。一旦一叠煎饼已经排好序，就不能再进行任何翻转。

 

Sample Input
输入示例

1 2 3 4 5
5 4 3 2 1
5 1 2 3 4

 

Sample Output
输出示例

1 2 3 4 5
0
5 4 3 2 1
1 0
5 1 2 3 4
1 2 0

 

Analysis
分析

算法很简单，给你一组煎饼，用笔在纸上一画就知道该怎么办了。还是动态规划的思想，从底至上，保持已经遍例过的煎饼都是最大且有序的。比如输入的数据为：

2 4 1 3 5

按题目要求，4在顶5在底。5已经是最大的了，则移动到上一个煎饼3。3之上（含）最大的是4，先将4翻转到最顶，形成：

4 2 1 3 5

然后将4到3的子叠翻转，形成：

3 1 2 4 5

移动到上一个煎饼2，2之上（含）最大的是3，而3就在顶部，因此直接将2到3翻转，形成：

2 1 3 4 5

最后将2和1翻转，就完成了。注意：一定不要忘了在输入的一行数据下再将原数据复制输出一行，漏掉必然WA。按照上面的算法来做就不会出现多余的翻转操作，因此不用担心。

这是一道很好的duque 的使用题目，利用stl可以很精简的解题，这一类型的题目直接用构造法解决，如果没有stl，代码的长度会增加很多。还有值得注意的是代码所用的for循环，个人很喜欢这样写for循环因为这样的代码量会减少很多，而却最重要的是代码很美观，漂亮。

我的代码：
 

#include 
#include 
#include 
#include 

using namespace std;

int main() {
	for(string s; getline(cin,s),cout << s << endl ; cout << 0 << endl ){
		deque stack;
		stringstream str(s);
		for(int temp; str >> temp; stack.push_front(temp));
		for(deque::iterator i = stack.begin(); i != stack.end(); ++i){
			deque::iterator imax = max_element(i,stack.end());
			if(imax != i){
				reverse(imax, stack.end());
				if(stack.end() - imax - 1) cout << stack.end() - imax - 1 << " ";
				reverse(i, stack.end());
				cout << i - stack.begin() + 1<< " ";
			}
		}
	}
		return 0;
}