VC解析XML文件-CMarkup的使用详解

VC解析XML文件的工具有很多，CMarkup， tinyXML，还有IBM的，MS的等等。
据说tinyXML很好，可能字符集问题，我编译不了。
所以就用CMarkup来解析，使用过后，觉得非常不错，使用起来很方便。
CMarkup下载地址：http://www.firstobject.com/
发现网上有方法很法，我就摘下来了

复制代码 代码如下:

//----------UserInfo.xml--------------   
xml version="1.0" encoding="UTF-8" ?>    
   
  luo    
  lin    
    
//----------UserInfo.xml--------------
xml version="1.0" encoding="UTF-8" ?>

luo
lin

一、生成UserInfo.xml

复制代码 代码如下:

CMarkup xml;    
xml.SetDoc("xml version=\"1.0\" encoding=\"UTF-8\"?>\r\n");    
xml.AddElem("UserInfo");    
xml.IntoElem();    
xml.AddElem("UserID","luo");    
xml.AddElem("UserID","lin");    
xml.OutOfElem();    
xml.Save("UserInfo.xml");   
CMarkup xml;
xml.SetDoc("xml version=\"1.0\" encoding=\"UTF-8\"?>\r\n");
xml.AddElem("UserInfo");
xml.IntoElem();
xml.AddElem("UserID","luo");
xml.AddElem("UserID","lin");
xml.OutOfElem();
xml.Save("UserInfo.xml");

二、浏览特定元素

复制代码 代码如下:

//----查看所有UserID----
CMarkup xml;    
xml.Load("UserInfo.xml");    
BOOL bFind = true;    
xml.ResetMainPos();    
while (xml.FindChildElem("UserID");)    
{    
      //此时接点还是父接点    
        CString strTagName = _T("");    
        CString strData = _T("");    
        strTagName = xml.GetChildTagName();    
        strData = xml.GetChildData();    
        TRACE("\n---tagName:%s,Data:%s--\n",strTagName,strData);    
}    
      /********************这样也可以******************   
      CMarkup xml;   
      xml.Load("UserInfo.xml");   
      BOOL bFind = true;   
      xml.ResetMainPos();   

      while (xml.FindChildElem("UserID");)   
      {   
                    xml.IntoElem();   
                    CString strTagName = _T("");   
                    CString strData = _T("");   
                    strTagName = xml.GetTagName();   
                    strData = xml.GetData();   
                    TRACE("\n---tagName:%s,Data:%s--\n",strTagName,strData);   
                    xml.OutOfElem();   
      }*/    
      /**************这样也可以**********************   
      CMarkup xml;   
      xml.Load("UserInfo.xml");   
      BOOL bFind = true;   
      xml.ResetMainPos();   
      xml.FindElem();  //UserInfo   
      xml.IntoElem();   
      while (xml.FindElem("UserID");)   
      {   
                    CString strTagName = _T("");   
                    CString strData = _T("");   
                    strTagName = xml.GetTagName();   
                    strData = xml.GetData();   
                    TRACE("\n---tagName:%s,Data:%s--\n",strTagName,strData);   
      }   
      */    

复制代码 代码如下:

//-------------结果----------    
---tagName:UserID,Data:luo--    
---tagName:UserID,Data:lin―   
//----查看所有UserID----
CMarkup xml;
xml.Load("UserInfo.xml");
BOOL bFind = true;
xml.ResetMainPos();
while (xml.FindChildElem("UserID");)
{
      //此时接点还是父接点
        CString strTagName = _T("");
        CString strData = _T("");
        strTagName = xml.GetChildTagName();
        strData = xml.GetChildData();
        TRACE("\n---tagName:%s,Data:%s--\n",strTagName,strData);
}
      /********************这样也可以******************
      CMarkup xml;
      xml.Load("UserInfo.xml");
      BOOL bFind = true;
      xml.ResetMainPos();

      while (xml.FindChildElem("UserID");)
      {
                    xml.IntoElem();
                    CString strTagName = _T("");
                    CString strData = _T("");
                    strTagName = xml.GetTagName();
                    strData = xml.GetData();
                    TRACE("\n---tagName:%s,Data:%s--\n",strTagName,strData);
                    xml.OutOfElem();
      }*/
      /**************这样也可以**********************
      CMarkup xml;
      xml.Load("UserInfo.xml");
      BOOL bFind = true;
      xml.ResetMainPos();
      xml.FindElem();  //UserInfo
      xml.IntoElem();
      while (xml.FindElem("UserID");)
      {
                    CString strTagName = _T("");
                    CString strData = _T("");
                    strTagName = xml.GetTagName();
                    strData = xml.GetData();
                    TRACE("\n---tagName:%s,Data:%s--\n",strTagName,strData);
      }
      */
//-------------结果----------
---tagName:UserID,Data:luo--
---tagName:UserID,Data:lin―

三、修改

复制代码 代码如下:

//--------把UserID为”luo”改为”flypigluo”-----------
BOOL bLoadXml = false;    
CMarkup xml;    
bLoadXml = xml.Load("UserInfo.xml");    
      if (bLoadXml)    
      {    
              CString strUserID = _T("");    
              xml.ResetMainPos();    
              xml.FindElem();    
              xml.IntoElem();    
              while (xml.FindElem("UserID"))    
              {    
                    strUserID = xml.GetData();    
                    if (strUserID=="luo")    
                    {    
                            xml.SetData(CString("flypig")+strUserID);    
                            xml.Save("UserInfo.xml");    
                            break;    
                    }    
              }    
      }   
//--------把UserID为”luo”改为”flypigluo”-----------
BOOL bLoadXml = false;
CMarkup xml;
bLoadXml = xml.Load("UserInfo.xml");
      if (bLoadXml)
      {
              CString strUserID = _T("");
              xml.ResetMainPos();
              xml.FindElem();
              xml.IntoElem();
              while (xml.FindElem("UserID"))
              {
                    strUserID = xml.GetData();
                    if (strUserID=="luo")
                    {
                            xml.SetData(CString("flypig")+strUserID);
                            xml.Save("UserInfo.xml");
                            break;
                    }
              }
      }

四、添加
1  添在最后面（使用的是AddElem）

复制代码 代码如下:

//加在最后面
BOOL bLoadXml = false;    
      CMarkup xml;    
      bLoadXml = xml.Load("UserInfo.xml");    
      if (bLoadXml)    
      {    
              xml.ResetMainPos();    
              xml.FindElem();    
              xml.IntoElem();    
              xml.AddElem("UserID","luoluo");    
              xml.OutOfElem();    
              xml.Save("UserInfo.xml");    
      }    
//--------原来为------    
xml version="1.0" encoding="UTF-8" ?>    
    
  luo    
  lin    
      
//---------添加后为-------------    
xml version="1.0" encoding="UTF-8" ?>    
    
  luo    
  lin    
  luoluo    
 

2  加在最前面（使用InsertElem）

复制代码 代码如下:

BOOL bLoadXml = false;    
CMarkup xml;    
bLoadXml = xml.Load("UserInfo.xml");    
if (bLoadXml)    
{    
      xml.ResetMainPos();    
      xml.FindElem();    
      xml.IntoElem();    
      xml.InsertElem("UserID","AddUserIDHead");    
      xml.OutOfElem();    
      xml.Save("UserInfo.xml");    
}    
//----原来为―    
xml version="1.0" encoding="UTF-8" ?>    
    
  luo    
  lin    
      
//------修改后-----    
xml version="1.0" encoding="UTF-8" ?>    
    
  AddUserIDHead    
  luo    
  lin    
     
BOOL bLoadXml = false;
CMarkup xml;
bLoadXml = xml.Load("UserInfo.xml");
if (bLoadXml)
{
      xml.ResetMainPos();
      xml.FindElem();
      xml.IntoElem();
      xml.InsertElem("UserID","AddUserIDHead");
      xml.OutOfElem();
      xml.Save("UserInfo.xml");
}
//----原来为―
xml version="1.0" encoding="UTF-8" ?>

  luo
  lin
 
//------修改后-----
xml version="1.0" encoding="UTF-8" ?>

  AddUserIDHead
  luo
  lin
 

五、删除

复制代码 代码如下:

CMarkup xml;    
xml.Load("UserInfo.xml");    
BOOL bFind = true;    
xml.ResetMainPos();         
while (bFind)    
{    
      bFind = xml.FindChildElem("UserID");    
      if (bFind)    
      {    
              //此时接点还是父接点    
              CString strData = _T("");    
              strData = xml.GetChildData();    
              if (strData=="luo")    
              {    
                    xml.RemoveChildElem();    
                    xml.Save("UserInfo.xml");    
                    break;    
              }    
      }    
}   
CMarkup xml;
xml.Load("UserInfo.xml");
BOOL bFind = true;
xml.ResetMainPos();     
while (bFind)
{
      bFind = xml.FindChildElem("UserID");
      if (bFind)
      {
              //此时接点还是父接点
              CString strData = _T("");
              strData = xml.GetChildData();
              if (strData=="luo")
              {
                    xml.RemoveChildElem();
                    xml.Save("UserInfo.xml");
                    break;
              }
      }
}

六、查找
见第二点浏览。类似上面的例子里面没有属性这些东西，下面的一个例子是有属性的

复制代码 代码如下:

//UserInfo1.xml    
xml version="1.0" encoding="UTF-8" ?>    
    
      
      
      
      
      
      
      
      
      
      
     
//UserInfo1.xml
xml version="1.0" encoding="UTF-8" ?>

 
 
 
 
 
 
 
 
 
 
 

七、产生

复制代码 代码如下:

CString strID = _T("");    
      CString strPwd = _T("");    
      CMarkup xml;    
      xml.SetDoc("xml version=\"1.0\" encoding=\"UTF-8\"?>");    
      xml.AddElem("UserInfo");    
      xml.IntoElem();    
      for (int i=0; i<10; i++)    
      {    
              //产生一个随机数，作为权限    
              srand(UINT(time(NULL)+i));    
              int nLevel = rand()%256;    
              strID.Format("UserID%02d",i);    
              strPwd.Format("UserPwd%02d",i);    
              xml.AddElem("User");    
              xml.AddAttrib("UserID",strID);    
              xml.AddAttrib("UserPwd",strPwd);    
              xml.AddAttrib("UserLevel",nLevel);    
      }    
      xml.OutOfElem();    
      xml.Save("UserInfo1.xml");   
CString strID = _T("");
      CString strPwd = _T("");
      CMarkup xml;
      xml.SetDoc("xml version=\"1.0\" encoding=\"UTF-8\"?>");
      xml.AddElem("UserInfo");
      xml.IntoElem();
      for (int i=0; i<10; i++)
      {
              //产生一个随机数，作为权限
              srand(UINT(time(NULL)+i));
              int nLevel = rand()%256;
              strID.Format("UserID%02d",i);
              strPwd.Format("UserPwd%02d",i);
              xml.AddElem("User");
              xml.AddAttrib("UserID",strID);
              xml.AddAttrib("UserPwd",strPwd);
              xml.AddAttrib("UserLevel",nLevel);
      }
      xml.OutOfElem();
      xml.Save("UserInfo1.xml");

八、查找

复制代码 代码如下:

CMarkup xml;    
BOOL bLoad = false;    
BOOL bFind = false;    
bLoad = xml.Load("UserInfo1.xml");    
      if (bLoad)    
      {    
              CString strID;    
              CString strPwd;    
              xml.ResetMainPos();    
              xml.FindElem();    //UserInfo    
              while (xml.FindChildElem("User"))    
              {    
                    strID = xml.GetChildAttrib("UserID");    
                    strPwd = xml.GetChildAttrib("UserPwd");    
                    TRACE("\n----id:%s,pwd:%s-------\n",strID,strPwd);    
                    if (strID=="UserID00"&&strPwd=="UserPwd00")    
                    {    
                            bFind = true;    
                            break;    
                    }    
              }    
      }    
      if (bFind)    
      {    
              TRACE("\n---- find------\n");    
      }    
      else    
      {    
              TRACE("\n----no find------\n");    
      }   
CMarkup xml;
BOOL bLoad = false;
BOOL bFind = false;
bLoad = xml.Load("UserInfo1.xml");
      if (bLoad)
      {
              CString strID;
              CString strPwd;
              xml.ResetMainPos();
              xml.FindElem();    //UserInfo
              while (xml.FindChildElem("User"))
              {
                    strID = xml.GetChildAttrib("UserID");
                    strPwd = xml.GetChildAttrib("UserPwd");
                    TRACE("\n----id:%s,pwd:%s-------\n",strID,strPwd);
                    if (strID=="UserID00"&&strPwd=="UserPwd00")
                    {
                            bFind = true;
                            break;
                    }
              }
      }
      if (bFind)
      {
              TRACE("\n---- find------\n");
      }
      else
      {
              TRACE("\n----no find------\n");
      }

九、修改

复制代码 代码如下:

CMarkup xml;    
      BOOL bLoad = false;    
      BOOL bFind = false;    
      bLoad = xml.Load("UserInfo1.xml");    
      if (bLoad)    
      {    
              CString strID;    
              CString strPwd;    
              xml.ResetMainPos();    
              xml.FindElem();    //UserInfo    
              while (xml.FindChildElem("User"))    
              {    
                    strID = xml.GetChildAttrib("UserID");    
                    strPwd = xml.GetChildAttrib("UserPwd");    
                    TRACE("\n----id:%s,pwd:%s-------\n",strID,strPwd);    
                    if (strID=="UserID00"&&strPwd=="UserPwd00")    
                    {    
                            bFind = true;    
                            xml.SetChildAttrib("UserID",strID+CString("Modify"));    
                            xml.Save("UserInfo1.xml");    
                            break;    
                    }    
              }    
      }    
      if (bFind)    
      {    
              TRACE("\n---- find------\n");    
      }    
      else    
      {    
              TRACE("\n----no find------\n");    
      }   

CMarkup字符集问题
CMarkup支持Unicode，_MBCS宏定义。VS默认设置为MBCS宏定义，未设置该宏时为UTF-8编码。
有 MBCS宏定义，且 打开的文件是UTF-8编码：
CMarkup在Load时将UTF-8转换ANSI编码格式，所以要在读取的地方设置
#include
setlocale(LC_ALL, "");
没有MBCS宏定义，且打开的文件是UTF-8编码：
系统默认将文件按UTF-8格式读入系统中，所以显示的时候要手动将数据转换为ANSI格式的进行显示
#include
setlocale(LC_ALL, "");
strVal = CMarkup::UTF8ToA(strVal);
PS：通过strcpy等拷贝函数可以修正。