MySQL+GTID_MHA
MHA介绍
MHA(MasterHigh Availability Manager and Tools for MySQL)，是日本的一位MySQL专家采用Perl语言编写的一个脚本管理工具，该工具仅适用于MySQLReplication（二层）环境，目的在于维持Master主库的高可用性。它是基于标准的MySQL复制(异步/半同步):
MHA有两部分组成:MHAManager(管理节点)和MHA Node(数据节点);
MHA Manager可以单独部署在一台独立机器上管理多个master-slave集群,也可以部署在一台slave上;
MHA Manager探测集群的node节点,当发现master出现故障的时候,它可以自动将具有最新数据的slave提升为新的master,然后将所有其它的slave导向新的master上,整个故障转移过程对应用程序是透明的；
MHA node运行在每台MySQL服务器上(master/slave/manager),它通过监控具备解析和清理logs功能的脚本来加快故障转移的；
MHA推荐一主二从架构，也支持一主一从架构。
MHA架构
MHA由MHA Manager和MHA Node组成：
MHA Manager:
运行一些工具，比如masterha_manager工具实现自动监控MySQL Master和实现master故障切换，其它工具实现手动实现master故障切换、在线mater转移、连接检查等等。一个Manager可以管理多个master-slave集群，只需要在管理节点上部署即可。
Manager工具包: masterha_check_ssh : 检查MHA的SSH配置。 masterha_check_repl : 检查MySQL复制。 masterha_manager : 启动MHA。 masterha_check_status : 检测当前MHA运行状态。 masterha_master_monitor : 监测master是否宕机。 masterha_master_switch : 控制故障转移(自动或手动)。 masterha_conf_host : 添加或删除配置的server信息。 |
MHA Node:
保存二进制日志:如果能够访问故障master，会拷贝master的二进制日志;
应用差异中继日志:从拥有最新数据的slave上生成差异中继日志，然后应用差异日志。
清除中继日志:在不停止SQL线程的情况下删除中继日志
Node工具(这些工具通常由MHA Manager的脚本触发,无需人手操作)。 save_binary_logs : 保存和复制master的二进制日志。 apply_diff_relay_logs : 识别差异的中继日志事件并应用于其它slave。 filter_mysqlbinlog : 去除不必要的ROLLBACK事件(MHA已不再使用这个工具)。 purge_relay_logs : 清除中继日志(不会阻塞SQL线程)。 |
MHA工作机制
当master出现故障时，通过对比slave之间I/O线程读取master binlog的位置，选取最接近的slave做为latest slave。其它slave通过与latest slave对比生成差异中继日志。在latest slave上应用从master保存的binlog，同时将latest slave提升为master。最后在其它slave上应用相应的差异中继日志并开始从新的master开始复制。
在MHA实现Master故障切换过程中，MHANode会试图访问故障的master（通过SSH），如果可以访问（不是硬件故障，比如InnoDB数据文件损坏等），会保存二进制文件，以最大程度保证数据不丢失。MHA和半同步复制一起使用会大大降低数据丢失的危险。
MHA优势
1、故障切换迅速
在M/S复制集群中，只要从库在复制上没有延迟，MHA通常可以在数秒内实现故障切换。9-10秒内检查到master故障，可以选择在7-10秒关闭master以避免出现裂脑，几秒钟内，将差异中继日志（relay log）应用到新的master上，因此总的宕机时间通常为10-30秒。恢复新的master后，MHA并行的恢复其余的slave。即使在有数万台slave，也不会影响master的恢复时间。
2、master故障不会导致数据不一致
当目前的master出现故障是，MHA自动识别slave之间中继日志（relay log）的不同，并应用到所有的slave中。这样所有的salve能够保持同步，只要所有的slave处于存活状态。和Semi-SynchronousReplication（半同步插件）一起使用，（几乎）可以保证没有数据丢失。
3、无需修改当前的MySQL设置
MHA的设计的重要原则之一就是尽可能地简单易用。MHA工作在传统的MySQL版本5.0和之后版本的主从复制环境中。和其它高可用解决方法比，MHA并不需要改变MySQL的部署环境。MHA适用于异步和半同步的主从复制。
启动/停止/升级/降级/安装/卸载MHA不需要改变（包扩启动/停止）MySQL复制。当需要升级MHA到新的版本，不需要停止MySQL，仅仅替换到新版本的MHA，然后重启MHAManager就好了。
MHA运行在MySQL5.0开始的原生版本上。一些其它的MySQL高可用解决方案需要特定的版本（比如MySQL集群、带全局事务ID的MySQL等等），但并不仅仅为了master的高可用才迁移应用的。在大多数情况下，已经部署了比较旧MySQL应用，并且不想仅仅为了实现Master的高可用，花太多的时间迁移到不同的存储引擎或更新的前沿发行版。MHA工作的包括5.0/5.1/5.5的原生版本的MySQL上，所以并不需要迁移。
4、无需增加大量的服务器
MHA由MHA Manager和MHANode组成。MHA Node运行在需要故障切换/恢复的MySQL服务器上，因此并不需要额外增加服务器。MHAManager运行在特定的服务器上，因此需要增加一台（实现高可用需要2台），但是MHAManager可以监控大量（甚至上百台）单独的master，因此，并不需要增加大量的服务器。即使在一台slave上运行MHA Manager也是可以的。综上，实现MHA并没用额外增加大量的服务。
5、无性能下降
MHA适用与异步或半同步的MySQL复制。监控master时，MHA仅仅是每隔几秒（默认是3秒）发送一个ping包，并不发送重查询。可以得到像原生MySQL复制一样快的性能。
6、适用于任何存储引擎
MHA可以运行在只要MySQL复制运行的存储引擎上，并不仅限制于InnoDB，即使在不易迁移的传统的MyISAM引擎环境，一样可以使用MHA。
7、MHA 0.56版本已经支持MYSQLGTID复制
MYSQLGTID
全局事务标示符（Global Transactions Identifier）是MySQL5.6复制的一个新特性，全局事务 ID 的官方定义是：GTID= source_id:transaction_id
MySQL 5.6 中，每一个 GTID 代表一个数据库事务。source_id 表示执行事务的主库 uuid（server_uuid），transaction_id 是一个从 1 开始的自增计数，表示在这个主库上执行的第 n 个事务。MySQL 会保证事务与 GTID 之间的 1 : 1 映射。GTID是全局唯一性。
MYSQLGTID优势
传统复制方式：
比如：Server A的服务器宕机，需要将业务切换到Server B上。同时，我们又需要将Server C的复制源改成Server B。复制源修改的命令语法很简单即CHANGE MASTER TO MASTER_HOST='***',MASTER_LOG_FILE='***', MASTER_LOG_POS=N。而难点在于，由于同一个事务在每台机器上所在的binlog名字和位置都不一样，那么怎么找到Server C当前同步停止点，对应ServerB的master_log_file和master_log_pos就会很困难。
GTID复制方式：
在5.6的GTID出现后，就很简单，由于同一事务的GTID在所有节点上的值一致，那么根据Server C当前停止点的GTID就能唯一定位到Server B上的GTID。甚至由于MASTER_AUTO_POSITION功能的出现，不需要知道GTID的具体值，直接使用change master tomaster_host='****',master_user='****',master_password='*****',master_auto_position=1命令就可以直接完成failover的工作。
MYSQLGTID限制
1.不能在事务中创建和删除临时表；
2.无法在事务中对非事务存储引擎进行更新；
3.不能使用create table tablename as select语句；
4.限制mysql_upgrade的执行；
5.不能使用一些无效的语句,skip_slave_skip_counter对GTID无效,应该改用gtid_next方式处理；
MYSQLGTID开启
在[mysqld]下添加一下参数：
gtid-mode = ON
enforce-gtid-consistency = ON
在搭建M/S过程中，只需要执行： change master to master_host='XX',master_user='repl',master_password='XX',master_auto_position=1; 就能完成复制关系的建立 |
MHA安装和配置
1.1 MHA
MHA（Master High Availability）0.56版本支持GTID和一主一从架构，以下以一主一从再加manager Node为例。
1.2 拓扑图
MHA分为Managernode 和 Agent node，此次设计，ManagerNode在192.168.1.108上，为独立的服务器，监控和管理整个集群的状态，192.168.1.103和192.168.1.104分别为Agent Node。
通过MHA软件，提供MasterVIP（192.168.1.108），且跟随Master自动漂移。
IP（VIP） |
MySQL数据库 |
MHA |
192.168.1.106 |
MHA Manager Node |
|
192.168.1.103(192.168.1.108) |
Master |
Agent Node |
192.168.1.104 |
Slave |
Agent Node |
注：（1）所有MHA所在的服务器需要配置root 用户下SSH互信
1.3安装 MHA软件
1．软件包： mha4mysql-manager-0.56-0.el6.noarch.rpm --只需要在Manager节点上安装 mha4mysql-node-0.56-0.el6.noarch.rpm perl-Config-Tiny-2.12-1.el6.rfx.noarch.rpm perl-Log-Dispatch-2.26-1.el6.rf.noarch.rpm perl-Parallel-ForkManager-0.7.5-2.2.el6.rf.noarch.rpm 1. 安装所有软件包（用yum安装，需配置yum源，注意安装先后顺序） yum install mha4mysql-node-0.56-0.el6.noarch.rpm yum install perl-Config-Tiny-2.12-1.el6.rfx.noarch.rpm yum install perl-Log-Dispatch-2.26-1.el6.rf.noarch.rpm yum install perl-Parallel-ForkManager-0.7.5-2.2.el6.rf.noarch.rpm yum install mha4mysql-manager-0.56-0.el6.noarch.rpm |
1.4配置MHA
1.4.1 MHA工具包
（1）Manager工具包: masterha_check_ssh : 检查MHA的SSH配置。 masterha_check_repl : 检查MySQL复制。 masterha_manager : 启动MHA。 masterha_check_status : 检测当前MHA运行状态。 masterha_master_monitor : 监测master是否宕机。 masterha_master_switch : 控制故障转移(自动或手动)。 masterha_conf_host : 添加或删除配置的server信息。 （2）Node工具(这些工具通常由MHA Manager的脚本触发,无需人手操作)。 save_binary_logs : 保存和复制master的二进制日志。 apply_diff_relay_logs : 识别差异的中继日志事件并应用于其它slave。 filter_mysqlbinlog : 去除不必要的ROLLBACK事件(MHA已不再使用这个工具)。 purge_relay_logs : 清除中继日志(不会阻塞SQL线程)。 |
1.4.2 配置MHA
注：只需要在ManagerNode上配置，Agent Node上无需做任何配置，此次配置文件放置在/etc/mha文件系统下：
MHA配置文件为app1.cnf,编辑app1.cnf文件，添加以下内容： [server default] manager_workdir=/etc/mha ---MHA工作目录 manager_log=/etc/mha/manager.log ---MHA日志存放目录 master_binlog_dir=/mysql/binlog/ ---MySQL数据库binlog位置 password=111111 ---- 密码 user=root ---MySQL用户读取relay log和改变复制关系需要使用 ping_interval=1 ---每一秒做一次健康检查 remote_workdir=/etc/mha --- 远程MHA工作目录 repl_password=oavir61 --- MySQL复制用户密码 repl_user=root --- MySQL复制用户 ssh_user=root ----ssh 互信用户 client_bindir=/mysql/app/bin ---MySQL可执行文件所在目录 master_ip_failover_script=/etc/mha/master_ip_failover ---VIP绑定和切换脚本 [server1] hostname=192.168.1.103 port=3306 master_binlog_dir=/mysql/binlog/ candidate_master=1 [server2] hostname=192.168.1.104 port=3306 master_binlog_dir=/mysql/binlog/ candidate_master=1 |
master_ip_failover脚本,MHA官方提供了一个脚本模板，但是需要自己做些修改，比如绑定和剔除VIP机制，在Master存活和Master当机两种方式剔除VIP的机制等等：
#!/usr/bin/env perl use strict; use warnings FATAL => 'all';
use Getopt::Long;
use Net::Ping; use Switch;
my ($command, $ssh_user, $orig_master_host, $orig_master_ip, $orig_master_port, $new_master_host, $new_master_ip, $new_master_port, $new_master_user, $new_master_password); GetOptions( 'command=s' => \$command, 'ssh_user=s' => \$ssh_user, 'orig_master_host=s' => \$orig_master_host, 'orig_master_ip=s' => \$orig_master_ip, 'orig_master_port=i' => \$orig_master_port, 'new_master_host=s' => \$new_master_host, 'new_master_ip=s' => \$new_master_ip, 'new_master_port=i' => \$new_master_port, 'new_master_user=s' => \$new_master_user, 'new_master_password=s' => \$new_master_password, ); my $vip = '192.168.1.108'; # Virtual IP my $master_srv = '192.168.1.104'; my $timeout = 5; my $key = "1"; my $gateway = '192.168.1.1'; my $interface = 'eth1'; my $ssh_start_vip = "/sbin/ifconfig $interface:$key $vip;/sbin/arping -I $interface -c 3 -s $vip $gateway >/dev/null 2>&1"; my $ssh_stop_vip = "/sbin/ifconfig $interface:$key down";
exit &main();
sub main {
#print "\n\nIN SCRIPT TEST====$ssh_stop_vip==$ssh_start_vip===\n\n"; print "\n\nIN SCRIPT TEST====$ssh_stop_vip==$ssh_start_vip===\n\n"; if ( $command eq "stop" || $command eq "stopssh" ) {
# $orig_master_host, $orig_master_ip, $orig_master_port are passed. # If you manage master ip address at global catalog database, # invalidate orig_master_ip here. my $exit_code = 1; eval { print "Disabling the VIP on old master if the server is still UP: $orig_master_host \n"; my $p=Net::Ping->new('icmp'); &stop_vip() if $p->ping($master_srv, $timeout); $p->close(); $exit_code = 0; }; if ($@) { warn "Got Error: $@\n"; exit $exit_code; } exit $exit_code; } elsif ( $command eq "start" ) {
# all arguments are passed. # If you manage master ip address at global catalog database, # activate new_master_ip here. # You can also grant write access (create user, set read_only=0, etc) here. my $exit_code = 10; eval { print "Enabling the VIP - $vip on the new master - $new_master_host \n"; &start_vip(); $exit_code = 0; }; if ($@) { warn $@; exit $exit_code; } exit $exit_code; } elsif ( $command eq "status" ) { print "Checking the Status of the script.. OK \n"; #`ssh $ssh_user\@$new_master_host \" $ssh_start_vip \"`; `ssh $ssh_user\@$orig_master_host \" $ssh_start_vip \"`; exit 0; } else { &usage(); exit 1; } }
# A simple system call that enable the VIP on the new master sub start_vip() { `ssh $ssh_user\@$new_master_host \" $ssh_start_vip \"`; } # A simple system call that disable the VIP on the old_master sub stop_vip() { `ssh $ssh_user\@$orig_master_host \" $ssh_stop_vip \"`; }
sub usage { "Usage: master_ip_failover --command=start|stop|stopssh|status --orig_master_host=host --orig_master_ip=ip --orig_master_port=port --new_master_host=host --new_master_ip=ip --new_master_port=port\n"; } |
1.4.3 MHA配置信息校验
（1）校验SSH互信： [root@srv-cntax-examportal-db2 mha]# masterha_check_ssh --conf=/etc/mha/app1.cnf [root@lab1 ~]# masterha_check_ssh --conf=/etc/mha/app1.cnf Sun Aug 14 11:11:17 2016 - [warning] Global configuration file /etc/masterha_default.cnf not found. Skipping. Sun Aug 14 11:11:17 2016 - [info] Reading application default configuration from /etc/mha/app1.cnf.. Sun Aug 14 11:11:17 2016 - [info] Reading server configuration from /etc/mha/app1.cnf.. Sun Aug 14 11:11:17 2016 - [info] Starting SSH connection tests.. Sun Aug 14 11:11:18 2016 - [debug] Sun Aug 14 11:11:17 2016 - [debug] Connecting via SSH from [email protected](192.168.1.104:22) to [email protected](192.168.1.103:22).. Sun Aug 14 11:11:18 2016 - [debug] ok. Sun Aug 14 11:11:18 2016 - [debug] Sun Aug 14 11:11:18 2016 - [debug] Connecting via SSH from [email protected](192.168.1.103:22) to [email protected](192.168.1.104:22).. Sun Aug 14 11:11:18 2016 - [debug] ok. Sun Aug 14 11:11:18 2016 - [info] All SSH connection tests passed successfully. （2）校验MySQL主从复制关系： masterha_check_repl --conf=/etc/mha/app1.cnf [root@lab1 ~]# masterha_check_ssh --conf=/etc/mha/app1.cnf Sun Aug 14 11:11:17 2016 - [warning] Global configuration file /etc/masterha_default.cnf not found. Skipping. Sun Aug 14 11:11:17 2016 - [info] Reading application default configuration from /etc/mha/app1.cnf.. Sun Aug 14 11:11:17 2016 - [info] Reading server configuration from /etc/mha/app1.cnf.. Sun Aug 14 11:11:17 2016 - [info] Starting SSH connection tests.. Sun Aug 14 11:11:18 2016 - [debug] Sun Aug 14 11:11:17 2016 - [debug] Connecting via SSH from [email protected](192.168.1.104:22) to [email protected](192.168.1.103:22).. Sun Aug 14 11:11:18 2016 - [debug] ok. Sun Aug 14 11:11:18 2016 - [debug] Sun Aug 14 11:11:18 2016 - [debug] Connecting via SSH from [email protected](192.168.1.103:22) to [email protected](192.168.1.104:22).. Sun Aug 14 11:11:18 2016 - [debug] ok. Sun Aug 14 11:11:18 2016 - [info] All SSH connection tests passed successfully. [root@lab1 ~]# masterha_check_repl --conf=/etc/mha/app1.cnf Sun Aug 14 11:12:56 2016 - [warning] Global configuration file /etc/masterha_default.cnf not found. Skipping. Sun Aug 14 11:12:56 2016 - [info] Reading application default configuration from /etc/mha/app1.cnf.. Sun Aug 14 11:12:56 2016 - [info] Reading server configuration from /etc/mha/app1.cnf.. Sun Aug 14 11:12:56 2016 - [info] MHA::MasterMonitor version 0.56. Sun Aug 14 11:12:56 2016 - [info] GTID failover mode = 1 Sun Aug 14 11:12:56 2016 - [info] Dead Servers: Sun Aug 14 11:12:56 2016 - [info] Alive Servers: Sun Aug 14 11:12:56 2016 - [info] 192.168.1.104(192.168.1.104:3306) Sun Aug 14 11:12:56 2016 - [info] 192.168.1.103(192.168.1.103:3306) Sun Aug 14 11:12:56 2016 - [info] Alive Slaves: Sun Aug 14 11:12:56 2016 - [info] 192.168.1.104(192.168.1.104:3306) Version=5.6.30-enterprise-commercial-advanced-log (oldest major version between slaves) log-bin:enabled Sun Aug 14 11:12:56 2016 - [info] GTID ON Sun Aug 14 11:12:56 2016 - [info] Replicating from 192.168.1.103(192.168.1.103:3306) Sun Aug 14 11:12:56 2016 - [info] Primary candidate for the new Master (candidate_master is set) Sun Aug 14 11:12:56 2016 - [info] Current Alive Master: 192.168.1.103(192.168.1.103:3306) Sun Aug 14 11:12:56 2016 - [info] Checking slave configurations.. Sun Aug 14 11:12:56 2016 - [info] read_only=1 is not set on slave 192.168.1.104(192.168.1.104:3306). Sun Aug 14 11:12:56 2016 - [info] Checking replication filtering settings.. Sun Aug 14 11:12:56 2016 - [info] binlog_do_db= , binlog_ignore_db= Sun Aug 14 11:12:56 2016 - [info] Replication filtering check ok. Sun Aug 14 11:12:56 2016 - [info] GTID (with auto-pos) is supported. Skipping all SSH and Node package checking. Sun Aug 14 11:12:56 2016 - [info] Checking SSH publickey authentication settings on the current master.. Sun Aug 14 11:12:57 2016 - [info] HealthCheck: SSH to 192.168.1.103 is reachable. Sun Aug 14 11:12:57 2016 - [info] 192.168.1.103(192.168.1.103:3306) (current master) +--192.168.1.104(192.168.1.104:3306)
Sun Aug 14 11:12:57 2016 - [info] Checking replication health on 192.168.1.104.. Sun Aug 14 11:12:57 2016 - [info] ok. Sun Aug 14 11:12:57 2016 - [info] Checking master_ip_failover_script status: Sun Aug 14 11:12:57 2016 - [info] /etc/mha/master_ip_failover --command=status --ssh_user=root --orig_master_host=192.168.1.103 --orig_master_ip=192.168.1.103 --orig_master_port=3306
IN SCRIPT TEST====/sbin/ifconfig eth1:1 down==/sbin/ifconfig eth1:1 192.168.1.108;/sbin/arping -I eth1 -c 3 -s 192.168.1.108 192.168.1.1 >/dev/null 2>&1===
Checking the Status of the script.. OK Sun Aug 14 11:13:00 2016 - [info] OK. Sun Aug 14 11:13:00 2016 - [warning] shutdown_script is not defined. Sun Aug 14 11:13:00 2016 - [info] Got exit code 0 (Not master dead). MySQL Replication Health is OK. 如果复制关系校验成功，此时会在Master上自动绑定我们需要的VIP （3）如果（1）和（2）都OK，则表明MHA配置成功 |
1.5启动 MHA
nohup masterha_manager --conf=/etc/mha/app1.cnf < /dev/null >/etc/mha/manager.log 2>&1 & manager.log： Sun Aug 14 11:47:07 2016 - [info] MHA::MasterMonitor version 0.56. Sun Aug 14 11:47:07 2016 - [info] GTID failover mode = 1 Sun Aug 14 11:47:07 2016 - [info] Dead Servers: Sun Aug 14 11:47:07 2016 - [info] Alive Servers: Sun Aug 14 11:47:07 2016 - [info] 192.168.1.104(192.168.1.104:3306) Sun Aug 14 11:47:07 2016 - [info] 192.168.1.103(192.168.1.103:3306) Sun Aug 14 11:47:07 2016 - [info] Alive Slaves: Sun Aug 14 11:47:07 2016 - [info] 192.168.1.104(192.168.1.104:3306) Version=5.6.30-enterprise-commercial-advanced-log (oldest major version between slaves) log-bin:enabled Sun Aug 14 11:47:07 2016 - [info] GTID ON Sun Aug 14 11:47:07 2016 - [info] Replicating from 192.168.1.103(192.168.1.103:3306) Sun Aug 14 11:47:07 2016 - [info] Primary candidate for the new Master (candidate_master is set) Sun Aug 14 11:47:07 2016 - [info] Current Alive Master: 192.168.1.103(192.168.1.103:3306) Sun Aug 14 11:47:07 2016 - [info] Checking slave configurations.. Sun Aug 14 11:47:07 2016 - [info] read_only=1 is not set on slave 192.168.1.104(192.168.1.104:3306). Sun Aug 14 11:47:07 2016 - [info] Checking replication filtering settings.. Sun Aug 14 11:47:07 2016 - [info] binlog_do_db= , binlog_ignore_db= Sun Aug 14 11:47:07 2016 - [info] Replication filtering check ok. Sun Aug 14 11:47:07 2016 - [info] GTID (with auto-pos) is supported. Skipping all SSH and Node package checking. Sun Aug 14 11:47:07 2016 - [info] Checking SSH publickey authentication settings on the current master.. Sun Aug 14 11:47:07 2016 - [info] HealthCheck: SSH to 192.168.1.103 is reachable. Sun Aug 14 11:47:07 2016 - [info] 192.168.1.103(192.168.1.103:3306) (current master) +--192.168.1.104(192.168.1.104:3306)
Sun Aug 14 11:47:07 2016 - [info] Checking master_ip_failover_script status: Sun Aug 14 11:47:07 2016 - [info] /etc/mha/master_ip_failover --command=status --ssh_user=root --orig_master_host=192.168.1.103 --orig_master_ip=192.168.1.103 --orig_master_port=3306
IN SCRIPT TEST====/sbin/ifconfig eth1:1 down==/sbin/ifconfig eth1:1 192.168.1.108;/sbin/arping -I eth1 -c 3 -s 192.168.1.108 192.168.1.1 >/dev/null 2>&1===
Checking the Status of the script.. OK Sun Aug 14 11:47:10 2016 - [info] OK. Sun Aug 14 11:47:10 2016 - [warning] shutdown_script is not defined. Sun Aug 14 11:47:10 2016 - [info] Set master ping interval 1 seconds. Sun Aug 14 11:47:10 2016 - [warning] secondary_check_script is not defined. It is highly recommended setting it to check master reachability from two or more routes. Sun Aug 14 11:47:10 2016 - [info] Starting ping health check on 192.168.1.103(192.168.1.103:3306).. Sun Aug 14 11:47:10 2016 - [info] Ping(SELECT) succeeded, waiting until MySQL doesn't respond.. 可以看到，MHA已经正常启动，且在192.168.1.103上绑定了VIP：192.168.1.108 |
1.6模拟故障切换：
1.6.1 Master数据库实例故障
1.关闭主库MySQL实例 在Master上：service mysqld stop,查看MHA manager日志：
Sun Aug 14 11:51:14 2016 - [warning] Got error on MySQL select ping: 2006 (MySQL server has gone away) Sun Aug 14 11:51:14 2016 - [info] Executing SSH check script: exit 0 Sun Aug 14 11:51:14 2016 - [info] HealthCheck: SSH to 192.168.1.103 is reachable. Sun Aug 14 11:51:15 2016 - [warning] Got error on MySQL connect: 2013 (Lost connection to MySQL server at 'reading initial communication packet', system error: 111) Sun Aug 14 11:51:15 2016 - [warning] Connection failed 2 time(s).. Sun Aug 14 11:51:16 2016 - [warning] Got error on MySQL connect: 2013 (Lost connection to MySQL server at 'reading initial communication packet', system error: 111) Sun Aug 14 11:51:16 2016 - [warning] Connection failed 3 time(s).. Sun Aug 14 11:51:17 2016 - [warning] Got error on MySQL connect: 2013 (Lost connection to MySQL server at 'reading initial communication packet', system error: 111) Sun Aug 14 11:51:17 2016 - [warning] Connection failed 4 time(s).. Sun Aug 14 11:51:17 2016 - [warning] Master is not reachable from health checker! Sun Aug 14 11:51:17 2016 - [warning] Master 192.168.1.103(192.168.1.103:3306) is not reachable! Sun Aug 14 11:51:17 2016 - [warning] SSH is reachable. Sun Aug 14 11:51:17 2016 - [info] Connecting to a master server failed. Reading configuration file /etc/masterha_default.cnf and /etc/mha/app1.cnf again, and trying to connect to all servers to check server status.. Sun Aug 14 11:51:17 2016 - [warning] Global configuration file /etc/masterha_default.cnf not found. Skipping. Sun Aug 14 11:51:17 2016 - [info] Reading application default configuration from /etc/mha/app1.cnf.. Sun Aug 14 11:51:17 2016 - [info] Reading server configuration from /etc/mha/app1.cnf.. Sun Aug 14 11:51:17 2016 - [info] GTID failover mode = 1 Sun Aug 14 11:51:17 2016 - [info] Dead Servers: Sun Aug 14 11:51:17 2016 - [info] 192.168.1.103(192.168.1.103:3306) Sun Aug 14 11:51:17 2016 - [info] Alive Servers: Sun Aug 14 11:51:17 2016 - [info] 192.168.1.104(192.168.1.104:3306) Sun Aug 14 11:51:17 2016 - [info] Alive Slaves: Sun Aug 14 11:51:17 2016 - [info] 192.168.1.104(192.168.1.104:3306) Version=5.6.30-enterprise-commercial-advanced-log (oldest major version between slaves) log-bin:enabled Sun Aug 14 11:51:17 2016 - [info] GTID ON Sun Aug 14 11:51:17 2016 - [info] Replicating from 192.168.1.103(192.168.1.103:3306) Sun Aug 14 11:51:17 2016 - [info] Primary candidate for the new Master (candidate_master is set) Sun Aug 14 11:51:17 2016 - [info] Checking slave configurations.. Sun Aug 14 11:51:17 2016 - [info] read_only=1 is not set on slave 192.168.1.104(192.168.1.104:3306). Sun Aug 14 11:51:17 2016 - [info] Checking replication filtering settings.. Sun Aug 14 11:51:17 2016 - [info] Replication filtering check ok. Sun Aug 14 11:51:17 2016 - [info] Master is down! Sun Aug 14 11:51:17 2016 - [info] Terminating monitoring script. Sun Aug 14 11:51:17 2016 - [info] Got exit code 20 (Master dead). Sun Aug 14 11:51:17 2016 - [info] MHA::MasterFailover version 0.56. Sun Aug 14 11:51:17 2016 - [info] Starting master failover. Sun Aug 14 11:51:17 2016 - [info] Sun Aug 14 11:51:17 2016 - [info] * Phase 1: Configuration Check Phase.. Sun Aug 14 11:51:17 2016 - [info] Sun Aug 14 11:51:17 2016 - [info] GTID failover mode = 1 Sun Aug 14 11:51:17 2016 - [info] Dead Servers: Sun Aug 14 11:51:17 2016 - [info] 192.168.1.103(192.168.1.103:3306) Sun Aug 14 11:51:17 2016 - [info] Checking master reachability via MySQL(double check)... Sun Aug 14 11:51:17 2016 - [info] ok. Sun Aug 14 11:51:17 2016 - [info] Alive Servers: Sun Aug 14 11:51:17 2016 - [info] 192.168.1.104(192.168.1.104:3306) Sun Aug 14 11:51:17 2016 - [info] Alive Slaves: Sun Aug 14 11:51:17 2016 - [info] 192.168.1.104(192.168.1.104:3306) Version=5.6.30-enterprise-commercial-advanced-log (oldest major version between slaves) log-bin:enabled Sun Aug 14 11:51:17 2016 - [info] GTID ON Sun Aug 14 11:51:17 2016 - [info] Replicating from 192.168.1.103(192.168.1.103:3306) Sun Aug 14 11:51:17 2016 - [info] Primary candidate for the new Master (candidate_master is set) Sun Aug 14 11:51:17 2016 - [info] Starting GTID based failover. Sun Aug 14 11:51:17 2016 - [info] Sun Aug 14 11:51:17 2016 - [info] ** Phase 1: Configuration Check Phase completed. Sun Aug 14 11:51:17 2016 - [info] Sun Aug 14 11:51:17 2016 - [info] * Phase 2: Dead Master Shutdown Phase.. Sun Aug 14 11:51:17 2016 - [info] Sun Aug 14 11:51:17 2016 - [info] Forcing shutdown so that applications never connect to the current master.. Sun Aug 14 11:51:17 2016 - [info] Executing master IP deactivation script: Sun Aug 14 11:51:17 2016 - [info] /etc/mha/master_ip_failover --orig_master_host=192.168.1.103 --orig_master_ip=192.168.1.103 --orig_master_port=3306 --command=stopssh --ssh_user=root
IN SCRIPT TEST====/sbin/ifconfig eth1:1 down==/sbin/ifconfig eth1:1 192.168.1.108;/sbin/arping -I eth1 -c 3 -s 192.168.1.108 192.168.1.1 >/dev/null 2>&1===
Disabling the VIP on old master if the server is still UP: 192.168.1.103 Sun Aug 14 11:51:17 2016 - [info] done. Sun Aug 14 11:51:17 2016 - [warning] shutdown_script is not set. Skipping explicit shutting down of the dead master. Sun Aug 14 11:51:17 2016 - [info] * Phase 2: Dead Master Shutdown Phase completed. Sun Aug 14 11:51:17 2016 - [info] Sun Aug 14 11:51:17 2016 - [info] * Phase 3: Master Recovery Phase.. Sun Aug 14 11:51:17 2016 - [info] Sun Aug 14 11:51:17 2016 - [info] * Phase 3.1: Getting Latest Slaves Phase.. Sun Aug 14 11:51:17 2016 - [info] Sun Aug 14 11:51:17 2016 - [info] The latest binary log file/position on all slaves is bin.000014:231 Sun Aug 14 11:51:17 2016 - [info] Latest slaves (Slaves that received relay log files to the latest): Sun Aug 14 11:51:17 2016 - [info] 192.168.1.104(192.168.1.104:3306) Version=5.6.30-enterprise-commercial-advanced-log (oldest major version between slaves) log-bin:enabled Sun Aug 14 11:51:17 2016 - [info] GTID ON Sun Aug 14 11:51:17 2016 - [info] Replicating from 192.168.1.103(192.168.1.103:3306) Sun Aug 14 11:51:17 2016 - [info] Primary candidate for the new Master (candidate_master is set) Sun Aug 14 11:51:17 2016 - [info] The oldest binary log file/position on all slaves is bin.000014:231 Sun Aug 14 11:51:17 2016 - [info] Oldest slaves: Sun Aug 14 11:51:17 2016 - [info] 192.168.1.104(192.168.1.104:3306) Version=5.6.30-enterprise-commercial-advanced-log (oldest major version between slaves) log-bin:enabled Sun Aug 14 11:51:17 2016 - [info] GTID ON Sun Aug 14 11:51:17 2016 - [info] Replicating from 192.168.1.103(192.168.1.103:3306) Sun Aug 14 11:51:17 2016 - [info] Primary candidate for the new Master (candidate_master is set) Sun Aug 14 11:51:17 2016 - [info] Sun Aug 14 11:51:17 2016 - [info] * Phase 3.3: Determining New Master Phase.. Sun Aug 14 11:51:17 2016 - [info] Sun Aug 14 11:51:17 2016 - [info] Searching new master from slaves.. Sun Aug 14 11:51:17 2016 - [info] Candidate masters from the configuration file: Sun Aug 14 11:51:17 2016 - [info] 192.168.1.104(192.168.1.104:3306) Version=5.6.30-enterprise-commercial-advanced-log (oldest major version between slaves) log-bin:enabled Sun Aug 14 11:51:17 2016 - [info] GTID ON Sun Aug 14 11:51:17 2016 - [info] Replicating from 192.168.1.103(192.168.1.103:3306) Sun Aug 14 11:51:17 2016 - [info] Primary candidate for the new Master (candidate_master is set) Sun Aug 14 11:51:17 2016 - [info] Non-candidate masters: Sun Aug 14 11:51:17 2016 - [info] Searching from candidate_master slaves which have received the latest relay log events.. Sun Aug 14 11:51:17 2016 - [info] New master is 192.168.1.104(192.168.1.104:3306) Sun Aug 14 11:51:17 2016 - [info] Starting master failover.. Sun Aug 14 11:51:17 2016 - [info] From: 192.168.1.103(192.168.1.103:3306) (current master) +--192.168.1.104(192.168.1.104:3306)
To: 192.168.1.104(192.168.1.104:3306) (new master) Sun Aug 14 11:51:17 2016 - [info] Sun Aug 14 11:51:17 2016 - [info] * Phase 3.3: New Master Recovery Phase.. Sun Aug 14 11:51:17 2016 - [info] Sun Aug 14 11:51:17 2016 - [info] Waiting all logs to be applied.. Sun Aug 14 11:51:17 2016 - [info] done. Sun Aug 14 11:51:17 2016 - [info] Getting new master's binlog name and position.. Sun Aug 14 11:51:17 2016 - [info] bin.000015:231 Sun Aug 14 11:51:17 2016 - [info] All other slaves should start replication from here. Statement should be: CHANGE MASTER TO MASTER_HOST='192.168.1.104', MASTER_PORT=3306, MASTER_AUTO_POSITION=1, MASTER_USER='repl', MASTER_PASSWORD='xxx'; Sun Aug 14 11:51:17 2016 - [info] Master Recovery succeeded. File:Pos:Exec_Gtid_Set: bin.000015, 231, 1683955a-6102-11e6-8b6f-080027ca1592:1-8, 1c3a7f53-6102-11e6-8b6f-08002722cc6d:1-10 Sun Aug 14 11:51:17 2016 - [info] Executing master IP activate script: Sun Aug 14 11:51:17 2016 - [info] /etc/mha/master_ip_failover --command=start --ssh_user=root --orig_master_host=192.168.1.103 --orig_master_ip=192.168.1.103 --orig_master_port=3306 --new_master_host=192.168.1.104 --new_master_ip=192.168.1.104 --new_master_port=3306 --new_master_user='root' --new_master_password='111111' IN SCRIPT TEST====/sbin/ifconfig eth1:1 down==/sbin/ifconfig eth1:1 192.168.1.108;/sbin/arping -I eth1 -c 3 -s 192.168.1.108 192.168.1.1 >/dev/null 2>&1=== Enabling the VIP - 192.168.1.108 on the new master - 192.168.1.104 Sun Aug 14 11:51:20 2016 - [info] OK. Sun Aug 14 11:51:20 2016 - [info] ** Finished master recovery successfully. Sun Aug 14 11:51:20 2016 - [info] * Phase 3: Master Recovery Phase completed. Sun Aug 14 11:51:20 2016 - [info] Sun Aug 14 11:51:20 2016 - [info] * Phase 4: Slaves Recovery Phase.. Sun Aug 14 11:51:20 2016 - [info] Sun Aug 14 11:51:20 2016 - [info] Sun Aug 14 11:51:20 2016 - [info] * Phase 4.1: Starting Slaves in parallel.. Sun Aug 14 11:51:20 2016 - [info] Sun Aug 14 11:51:20 2016 - [info] All new slave servers recovered successfully. Sun Aug 14 11:51:20 2016 - [info] Sun Aug 14 11:51:20 2016 - [info] * Phase 5: New master cleanup phase.. Sun Aug 14 11:51:20 2016 - [info] Sun Aug 14 11:51:20 2016 - [info] Resetting slave info on the new master.. Sun Aug 14 11:51:20 2016 - [info] 192.168.1.104: Resetting slave info succeeded. Sun Aug 14 11:51:20 2016 - [info] Master failover to 192.168.1.104(192.168.1.104:3306) completed successfully. Sun Aug 14 11:51:20 2016 - [info]
----- Failover Report -----
app1: MySQL Master failover 192.168.1.103(192.168.1.103:3306) to 192.168.1.104(192.168.1.104:3306) succeeded
Master 192.168.1.103(192.168.1.103:3306) is down!
Check MHA Manager logs at lab1:/etc/mha/manager.log for details.
Started automated(non-interactive) failover. Invalidated master IP address on 192.168.1.103(192.168.1.103:3306) Selected 192.168.1.104(192.168.1.104:3306) as a new master. 192.168.1.104(192.168.1.104:3306): OK: Applying all logs succeeded. 192.168.1.104(192.168.1.104:3306): OK: Activated master IP address. 192.168.1.104(192.168.1.104:3306): Resetting slave info succeeded. Master failover to 192.168.1.104(192.168.1.104:3306) completed successfully. 从日志中可以看到，master切换至192.168.1.104 slave上，并且VIP也随之绑定到192.168.1.104 对应的网卡设备上。 2.主库服务器当机 （1）把192.168.1.03与192.168.1.104复制关系重新建立： change master to master_host='192.168.1.104',master_user='repl',master_password='111111',master_auto_position=1; start slave; (2)重新启动MHA： nohup masterha_manager --conf=/etc/mha/app1.cnf < /dev/null >/etc/mha/app1.log 2>&1 & （3）直接关闭192.168.1.104服务器，查看切换情况： Shutdown –h now 对应MHA manager日志：
Sun Aug 14 11:59:09 2016 - [info] MHA::MasterMonitor version 0.56. Sun Aug 14 11:59:09 2016 - [info] GTID failover mode = 1 Sun Aug 14 11:59:09 2016 - [info] Dead Servers: Sun Aug 14 11:59:09 2016 - [info] Alive Servers: Sun Aug 14 11:59:09 2016 - [info] 192.168.1.104(192.168.1.104:3306) Sun Aug 14 11:59:09 2016 - [info] 192.168.1.103(192.168.1.103:3306) Sun Aug 14 11:59:09 2016 - [info] Alive Slaves: Sun Aug 14 11:59:09 2016 - [info] 192.168.1.103(192.168.1.103:3306) Version=5.6.30-enterprise-commercial-advanced-log (oldest major version between slaves) log-bin:enabled Sun Aug 14 11:59:09 2016 - [info] GTID ON Sun Aug 14 11:59:09 2016 - [info] Replicating from 192.168.1.104(192.168.1.104:3306) Sun Aug 14 11:59:09 2016 - [info] Primary candidate for the new Master (candidate_master is set) Sun Aug 14 11:59:09 2016 - [info] Current Alive Master: 192.168.1.104(192.168.1.104:3306) Sun Aug 14 11:59:09 2016 - [info] Checking slave configurations.. Sun Aug 14 11:59:09 2016 - [info] read_only=1 is not set on slave 192.168.1.103(192.168.1.103:3306). Sun Aug 14 11:59:09 2016 - [info] Checking replication filtering settings.. Sun Aug 14 11:59:09 2016 - [info] binlog_do_db= , binlog_ignore_db= Sun Aug 14 11:59:09 2016 - [info] Replication filtering check ok. Sun Aug 14 11:59:09 2016 - [info] GTID (with auto-pos) is supported. Skipping all SSH and Node package checking. Sun Aug 14 11:59:09 2016 - [info] Checking SSH publickey authentication settings on the current master.. Sun Aug 14 11:59:09 2016 - [info] HealthCheck: SSH to 192.168.1.104 is reachable. Sun Aug 14 11:59:09 2016 - [info] 192.168.1.104(192.168.1.104:3306) (current master) +--192.168.1.103(192.168.1.103:3306)
Sun Aug 14 11:59:09 2016 - [info] Checking master_ip_failover_script status: Sun Aug 14 11:59:09 2016 - [info] /etc/mha/master_ip_failover --command=status --ssh_user=root --orig_master_host=192.168.1.104 --orig_master_ip=192.168.1.104 --orig_master_port=3306
IN SCRIPT TEST====/sbin/ifconfig eth1:1 down==/sbin/ifconfig eth1:1 192.168.1.108;/sbin/arping -I eth1 -c 3 -s 192.168.1.108 192.168.1.1 >/dev/null 2>&1===
Checking the Status of the script.. OK Sun Aug 14 11:59:12 2016 - [info] OK. Sun Aug 14 11:59:12 2016 - [warning] shutdown_script is not defined. Sun Aug 14 11:59:12 2016 - [info] Set master ping interval 1 seconds. Sun Aug 14 11:59:12 2016 - [warning] secondary_check_script is not defined. It is highly recommended setting it to check master reachability from two or more routes. Sun Aug 14 11:59:12 2016 - [info] Starting ping health check on 192.168.1.104(192.168.1.104:3306).. Sun Aug 14 11:59:12 2016 - [info] Ping(SELECT) succeeded, waiting until MySQL doesn't respond.. Sun Aug 14 11:59:23 2016 - [warning] Got error on MySQL select ping: 2006 (MySQL server has gone away) Sun Aug 14 11:59:23 2016 - [info] Executing SSH check script: exit 0 Sun Aug 14 11:59:23 2016 - [warning] HealthCheck: SSH to 192.168.1.104 is NOT reachable. Sun Aug 14 11:59:24 2016 - [warning] Got error on MySQL connect: 2013 (Lost connection to MySQL server at 'reading initial communication packet', system error: 111) Sun Aug 14 11:59:24 2016 - [warning] Connection failed 2 time(s).. Sun Aug 14 11:59:25 2016 - [warning] Got error on MySQL connect: 2013 (Lost connection to MySQL server at 'reading initial communication packet', system error: 111) Sun Aug 14 11:59:25 2016 - [warning] Connection failed 3 time(s).. Sun Aug 14 11:59:26 2016 - [warning] Got error on MySQL connect: 2013 (Lost connection to MySQL server at 'reading initial communication packet', system error: 111) Sun Aug 14 11:59:26 2016 - [warning] Connection failed 4 time(s).. Sun Aug 14 11:59:26 2016 - [warning] Master is not reachable from health checker! Sun Aug 14 11:59:26 2016 - [warning] Master 192.168.1.104(192.168.1.104:3306) is not reachable! Sun Aug 14 11:59:26 2016 - [warning] SSH is NOT reachable. Sun Aug 14 11:59:26 2016 - [info] Connecting to a master server failed. Reading configuration file /etc/masterha_default.cnf and /etc/mha/app1.cnf again, and trying to connect to all servers to check server status.. Sun Aug 14 11:59:26 2016 - [warning] Global configuration file /etc/masterha_default.cnf not found. Skipping. Sun Aug 14 11:59:26 2016 - [info] Reading application default configuration from /etc/mha/app1.cnf.. Sun Aug 14 11:59:26 2016 - [info] Reading server configuration from /etc/mha/app1.cnf.. Sun Aug 14 11:59:27 2016 - [info] GTID failover mode = 1 Sun Aug 14 11:59:27 2016 - [info] Dead Servers: Sun Aug 14 11:59:27 2016 - [info] 192.168.1.104(192.168.1.104:3306) Sun Aug 14 11:59:27 2016 - [info] Alive Servers: Sun Aug 14 11:59:27 2016 - [info] 192.168.1.103(192.168.1.103:3306) Sun Aug 14 11:59:27 2016 - [info] Alive Slaves: Sun Aug 14 11:59:27 2016 - [info] 192.168.1.103(192.168.1.103:3306) Version=5.6.30-enterprise-commercial-advanced-log (oldest major version between slaves) log-bin:enabled Sun Aug 14 11:59:27 2016 - [info] GTID ON Sun Aug 14 11:59:27 2016 - [info] Replicating from 192.168.1.104(192.168.1.104:3306) Sun Aug 14 11:59:27 2016 - [info] Primary candidate for the new Master (candidate_master is set) Sun Aug 14 11:59:27 2016 - [info] Checking slave configurations.. Sun Aug 14 11:59:27 2016 - [info] read_only=1 is not set on slave 192.168.1.103(192.168.1.103:3306). Sun Aug 14 11:59:27 2016 - [info] Checking replication filtering settings.. Sun Aug 14 11:59:27 2016 - [info] Replication filtering check ok. Sun Aug 14 11:59:27 2016 - [info] Master is down! Sun Aug 14 11:59:27 2016 - [info] Terminating monitoring script. Sun Aug 14 11:59:27 2016 - [info] Got exit code 20 (Master dead). Sun Aug 14 11:59:27 2016 - [info] MHA::MasterFailover version 0.56. Sun Aug 14 11:59:27 2016 - [info] Starting master failover. Sun Aug 14 11:59:27 2016 - [info] Sun Aug 14 11:59:27 2016 - [info] * Phase 1: Configuration Check Phase.. Sun Aug 14 11:59:27 2016 - [info] Sun Aug 14 11:59:27 2016 - [info] GTID failover mode = 1 Sun Aug 14 11:59:27 2016 - [info] Dead Servers: Sun Aug 14 11:59:27 2016 - [info] 192.168.1.104(192.168.1.104:3306) Sun Aug 14 11:59:27 2016 - [info] Checking master reachability via MySQL(double check)... Sun Aug 14 11:59:28 2016 - [info] ok. Sun Aug 14 11:59:28 2016 - [info] Alive Servers: Sun Aug 14 11:59:28 2016 - [info] 192.168.1.103(192.168.1.103:3306) Sun Aug 14 11:59:28 2016 - [info] Alive Slaves: Sun Aug 14 11:59:28 2016 - [info] 192.168.1.103(192.168.1.103:3306) Version=5.6.30-enterprise-commercial-advanced-log (oldest major version between slaves) log-bin:enabled Sun Aug 14 11:59:28 2016 - [info] GTID ON Sun Aug 14 11:59:28 2016 - [info] Replicating from 192.168.1.104(192.168.1.104:3306) Sun Aug 14 11:59:28 2016 - [info] Primary candidate for the new Master (candidate_master is set) Sun Aug 14 11:59:28 2016 - [info] Starting GTID based failover. Sun Aug 14 11:59:28 2016 - [info] Sun Aug 14 11:59:28 2016 - [info] ** Phase 1: Configuration Check Phase completed. Sun Aug 14 11:59:28 2016 - [info] Sun Aug 14 11:59:28 2016 - [info] * Phase 2: Dead Master Shutdown Phase.. Sun Aug 14 11:59:28 2016 - [info] Sun Aug 14 11:59:28 2016 - [info] Forcing shutdown so that applications never connect to the current master.. Sun Aug 14 11:59:28 2016 - [info] Executing master IP deactivation script: Sun Aug 14 11:59:28 2016 - [info] /etc/mha/master_ip_failover --orig_master_host=192.168.1.104 --orig_master_ip=192.168.1.104 --orig_master_port=3306 --command=stop
IN SCRIPT TEST====/sbin/ifconfig eth1:1 down==/sbin/ifconfig eth1:1 192.168.1.108;/sbin/arping -I eth1 -c 3 -s 192.168.1.108 192.168.1.1 >/dev/null 2>&1===
Disabling the VIP on old master if the server is still UP: 192.168.1.104 Sun Aug 14 11:59:34 2016 - [info] done. Sun Aug 14 11:59:34 2016 - [warning] shutdown_script is not set. Skipping explicit shutting down of the dead master. Sun Aug 14 11:59:34 2016 - [info] * Phase 2: Dead Master Shutdown Phase completed. Sun Aug 14 11:59:34 2016 - [info] Sun Aug 14 11:59:34 2016 - [info] * Phase 3: Master Recovery Phase.. Sun Aug 14 11:59:34 2016 - [info] Sun Aug 14 11:59:34 2016 - [info] * Phase 3.1: Getting Latest Slaves Phase.. Sun Aug 14 11:59:34 2016 - [info] Sun Aug 14 11:59:34 2016 - [info] The latest binary log file/position on all slaves is bin.000015:231 Sun Aug 14 11:59:34 2016 - [info] Latest slaves (Slaves that received relay log files to the latest): Sun Aug 14 11:59:34 2016 - [info] 192.168.1.103(192.168.1.103:3306) Version=5.6.30-enterprise-commercial-advanced-log (oldest major version between slaves) log-bin:enabled Sun Aug 14 11:59:34 2016 - [info] GTID ON Sun Aug 14 11:59:34 2016 - [info] Replicating from 192.168.1.104(192.168.1.104:3306) Sun Aug 14 11:59:34 2016 - [info] Primary candidate for the new Master (candidate_master is set) Sun Aug 14 11:59:34 2016 - [info] The oldest binary log file/position on all slaves is bin.000015:231 Sun Aug 14 11:59:34 2016 - [info] Oldest slaves: Sun Aug 14 11:59:34 2016 - [info] 192.168.1.103(192.168.1.103:3306) Version=5.6.30-enterprise-commercial-advanced-log (oldest major version between slaves) log-bin:enabled Sun Aug 14 11:59:34 2016 - [info] GTID ON Sun Aug 14 11:59:34 2016 - [info] Replicating from 192.168.1.104(192.168.1.104:3306) Sun Aug 14 11:59:34 2016 - [info] Primary candidate for the new Master (candidate_master is set) Sun Aug 14 11:59:34 2016 - [info] Sun Aug 14 11:59:34 2016 - [info] * Phase 3.3: Determining New Master Phase.. Sun Aug 14 11:59:34 2016 - [info] Sun Aug 14 11:59:34 2016 - [info] Searching new master from slaves.. Sun Aug 14 11:59:34 2016 - [info] Candidate masters from the configuration file: Sun Aug 14 11:59:34 2016 - [info] 192.168.1.103(192.168.1.103:3306) Version=5.6.30-enterprise-commercial-advanced-log (oldest major version between slaves) log-bin:enabled Sun Aug 14 11:59:34 2016 - [info] GTID ON Sun Aug 14 11:59:34 2016 - [info] Replicating from 192.168.1.104(192.168.1.104:3306) Sun Aug 14 11:59:34 2016 - [info] Primary candidate for the new Master (candidate_master is set) Sun Aug 14 11:59:34 2016 - [info] Non-candidate masters: Sun Aug 14 11:59:34 2016 - [info] Searching from candidate_master slaves which have received the latest relay log events.. Sun Aug 14 11:59:34 2016 - [info] New master is 192.168.1.103(192.168.1.103:3306) Sun Aug 14 11:59:34 2016 - [info] Starting master failover.. Sun Aug 14 11:59:34 2016 - [info] From: 192.168.1.104(192.168.1.104:3306) (current master) +--192.168.1.103(192.168.1.103:3306)
To: 192.168.1.103(192.168.1.103:3306) (new master) Sun Aug 14 11:59:34 2016 - [info] Sun Aug 14 11:59:34 2016 - [info] * Phase 3.3: New Master Recovery Phase.. Sun Aug 14 11:59:34 2016 - [info] Sun Aug 14 11:59:34 2016 - [info] Waiting all logs to be applied.. Sun Aug 14 11:59:34 2016 - [info] done. Sun Aug 14 11:59:34 2016 - [info] Getting new master's binlog name and position.. Sun Aug 14 11:59:34 2016 - [info] bin.000015:231 Sun Aug 14 11:59:34 2016 - [info] All other slaves should start replication from here. Statement should be: CHANGE MASTER TO MASTER_HOST='192.168.1.103', MASTER_PORT=3306, MASTER_AUTO_POSITION=1, MASTER_USER='repl', MASTER_PASSWORD='xxx'; Sun Aug 14 11:59:34 2016 - [info] Master Recovery succeeded. File:Pos:Exec_Gtid_Set: bin.000015, 231, 1683955a-6102-11e6-8b6f-080027ca1592:1-8, 1c3a7f53-6102-11e6-8b6f-08002722cc6d:1-10 Sun Aug 14 11:59:34 2016 - [info] Executing master IP activate script: Sun Aug 14 11:59:34 2016 - [info] /etc/mha/master_ip_failover --command=start --ssh_user=root --orig_master_host=192.168.1.104 --orig_master_ip=192.168.1.104 --orig_master_port=3306 --new_master_host=192.168.1.103 --new_master_ip=192.168.1.103 --new_master_port=3306 --new_master_user='root' --new_master_password='111111'
IN SCRIPT TEST====/sbin/ifconfig eth1:1 down==/sbin/ifconfig eth1:1 192.168.1.108;/sbin/arping -I eth1 -c 3 -s 192.168.1.108 192.168.1.1 >/dev/null 2>&1===
Enabling the VIP - 192.168.1.108 on the new master - 192.168.1.103 Sun Aug 14 11:59:37 2016 - [info] OK. Sun Aug 14 11:59:37 2016 - [info] ** Finished master recovery successfully. Sun Aug 14 11:59:37 2016 - [info] * Phase 3: Master Recovery Phase completed. Sun Aug 14 11:59:37 2016 - [info] Sun Aug 14 11:59:37 2016 - [info] * Phase 4: Slaves Recovery Phase.. Sun Aug 14 11:59:37 2016 - [info] Sun Aug 14 11:59:37 2016 - [info] Sun Aug 14 11:59:37 2016 - [info] * Phase 4.1: Starting Slaves in parallel.. Sun Aug 14 11:59:37 2016 - [info] Sun Aug 14 11:59:37 2016 - [info] All new slave servers recovered successfully. Sun Aug 14 11:59:37 2016 - [info] Sun Aug 14 11:59:37 2016 - [info] * Phase 5: New master cleanup phase.. Sun Aug 14 11:59:37 2016 - [info] Sun Aug 14 11:59:37 2016 - [info] Resetting slave info on the new master.. Sun Aug 14 11:59:37 2016 - [info] 192.168.1.103: Resetting slave info succeeded. Sun Aug 14 11:59:37 2016 - [info] Master failover to 192.168.1.103(192.168.1.103:3306) completed successfully. Sun Aug 14 11:59:37 2016 - [info]
----- Failover Report -----
app1: MySQL Master failover 192.168.1.104(192.168.1.104:3306) to 192.168.1.103(192.168.1.103:3306) succeeded
Master 192.168.1.104(192.168.1.104:3306) is down! Check MHA Manager logs at lab1:/etc/mha/manager.log for details. Started automated(non-interactive) failover. Invalidated master IP address on 192.168.1.104(192.168.1.104:3306) Selected 192.168.1.103(192.168.1.103:3306) as a new master. 192.168.1.103(192.168.1.103:3306): OK: Applying all logs succeeded. 192.168.1.103(192.168.1.103:3306): OK: Activated master IP address. 192.168.1.103(192.168.1.103:3306): Resetting slave info succeeded. Master failover to 192.168.1.103(192.168.1.103:3306) completed successfully.
可以看到Master已经切换至192.168.1.103 上，VIP也绑定至192.168.1.103上。 |