本文实例讲述了Java ThreadLocal用法。分享给大家供大家参考,具体如下:
目录
- ThreadLocal的基本使用
- ThreadLocal实现原理
- 源码分析(基于openjdk11)
- get方法:
- setInitialValue方法
- getEntry方法
- set方法
- ThreadLocalMap的set方法
- replaceStaleEntry方法
- cleanSomeSlots方法
- rehash方法
- expungeStaleEntries方法
- resize方法
- ThreadLocalMap的set方法
- get方法:
ThreadLocal实现了Java中线程局部变量。所谓线程局部变量就是保存在每个线程中独有的一些数据,我们知道一个进程中的所有线程是共享该进程的资源的,线程对进程中的资源进行修改会反应到该进程中的其他线程上,如果我们希望一个线程对资源的修改不会影响到其他线程,那么就需要将该资源设为线程局部变量的形式。
ThreadLocal的基本使用
如下示例所示,定义两个ThreadLocal变量,然后分别在主线程和子线程中对线程局部变量进行修改,然后分别获取线程局部变量的值:
public class ThreadLocalTest { private static ThreadLocalthreadLocal1 = ThreadLocal.withInitial(() -> "threadLocal1 first value"); private static ThreadLocal threadLocal2 = ThreadLocal.withInitial(() -> "threadLocal2 first value"); public static void main(String[] args) throws Exception{ Thread thread = new Thread(() -> { System.out.println("================" + Thread.currentThread().getName() + " enter================="); // 子线程中打印出初始值 printThreadLocalInfo(); // 子线程中设置新值 threadLocal1.set("new thread threadLocal1 value"); threadLocal2.set("new thread threadLocal2 value"); // 子线程打印出新值 printThreadLocalInfo(); System.out.println("================" + Thread.currentThread().getName() + " exit================="); }); thread.start(); // 等待新线程执行 thread.join(); // 在main线程打印threadLocal1和threadLocal2,验证子线程对这两个变量的修改是否会影响到main线程中的这两个值 printThreadLocalInfo(); // 在main线程中给threadLocal1和threadLocal2设置新值 threadLocal1.set("main threadLocal1 value"); threadLocal2.set("main threadLocal2 value"); // 验证main线程中这两个变量是否为新值 printThreadLocalInfo(); } private static void printThreadLocalInfo() { System.out.println(Thread.currentThread().getName() + ": " + threadLocal1.get()); System.out.println(Thread.currentThread().getName() + ": " + threadLocal2.get()); } }
运行结果如下:
================Thread-0 enter================= Thread-0: threadLocal1 first value Thread-0: threadLocal2 first value Thread-0: new thread threadLocal1 value Thread-0: new thread threadLocal2 value ================Thread-0 exit================= main: threadLocal1 first value main: threadLocal2 first value main: main threadLocal1 value main: main threadLocal2 value
如果子线程对threadLocal1
和threadLocal2
的修改会影响到main线程中的threadLocal1
和threadLocal2
,那么在main线程第一次printThreadLocalInfo();
打印出的应该是修改后的新值,即为new thread threadLocal1 value
和new thread threadLocal2 value
和,但实际打印结果并不是这样,说明在新线程中对threadLocal1
和threadLocal2
的修改并不会影响到main线程中的这两个变量,似乎main线程中的threadLocal1
和threadLocal2
作用域仅局限于main线程,新线程中的threadLocal1
和threadLocal2
作用域仅局限于新线程,这就是线程局部变量的由来。
ThreadLocal实现原理
如下图所示
每个线程对象里会持有一个java.lang.ThreadLocal.ThreadLocalMap
类型的threadLocals
成员变量,而ThreadLocalMap
里有一个java.lang.ThreadLocal.ThreadLocalMap.Entry[]
类型的table
成员,这是一个数组,数组元素是Entry
类型,Entry
中相当于有一个key
和value
,key
指向所有线程共享的java.lang.ThreadLocal
对象,value
指向各线程私有的变量,这样保证了线程局部变量的隔离性,每个线程只是读取和修改自己所持有的那个value对象,相互之间没有影响。
源码分析(基于openjdk11)
源码包括ThreadLocal
和ThreadLocalMap
,ThreadLocalMap
是ThreadLocal
内定义的一个静态内部类,用于存储实际的数据。当调用ThreadLocal
的get
或者set
方法时都有可能创建当前线程的threadLocals
成员(ThreadLocalMap
类型)。
get方法:
ThreadLocal的get方法定义如下
/** * Returns the value in the current thread's copy of this * thread-local variable. If the variable has no value for the * current thread, it is first initialized to the value returned * by an invocation of the {@link #initialValue} method. * * @return the current thread's value of this thread-local */ public T get() { // 获取当前线程 Thread t = Thread.currentThread(); // 获取当前线程的threadLocals成员变量,这是一个ThreadLocalMap ThreadLocalMap map = getMap(t); // threadLocals不为null则直接从threadLocals中取出ThreadLocal // 对象对应的值 if (map != null) { // 从map中获取当前ThreadLocal对象对应Entry对象 ThreadLocalMap.Entry e = map.getEntry(this); if (e != null) { // 获取ThreadLocal对象对应的value值 @SuppressWarnings("unchecked") T result = (T)e.value; return result; } } // threadLocals为null,则需要创建ThreadLocalMap对象并赋给 // threadLocals,将当前ThreadLocal对象作为key,调用initialValue // 获得的初始值作为value,放置到threadLocals的entry中; // 或者threadLocals不为null,但在threadLocals中未 // 找到当前ThreadLocal对象对应的entry,则需要向threadLocals添加新的 // entry,该entry以当前的ThreadLocal对象作为key,调用initialValue // 获得的值作为value return setInitialValue(); } /** * Get the map associated with a ThreadLocal. Overridden in * InheritableThreadLocal. * * @param t the current thread * @return the map */ ThreadLocalMap getMap(Thread t) { return t.threadLocals; }
当Thread
的threadLocals
为null,或者在Thread
的threadLocals
中未找到当前ThreadLocal对象对应的entry,则进入到setInitialValue
方法;否则进入到ThreadLocalMap
的getEntry
方法。
setInitialValue方法
定义如下:
private T setInitialValue() { // 获取初始值,如果我们在定义ThreadLocal对象时实现了ThreadLocal // 的initialValue方法,就会调用我们自定义的方法来获取初始值,否则 // 使用initialValue的默认实现返回null值 T value = initialValue(); Thread t = Thread.currentThread(); // 获取当前线程的threadLocals成员 ThreadLocalMap map = getMap(t); if (map != null) { // 若threadLocals存在则将ThreadLocal对象对应的value设置为初始值 map.set(this, value); } else { // 否则创建threadLocals对象并设置初始值 createMap(t, value); } if (this instanceof TerminatingThreadLocal) { TerminatingThreadLocal.register((TerminatingThreadLocal) this); } return value; }
createMap
方法实现
/** * Create the map associated with a ThreadLocal. Overridden in * InheritableThreadLocal. * * @param t the current thread * @param firstValue value for the initial entry of the map */ void createMap(Thread t, T firstValue) { // 创建一个ThreadLocalMap对象,用当前ThreadLocal对象和初始值value来 // 构造ThreadLocalMap中table的第一个entry。ThreadLocalMap对象赋 // 给线程的threadLocals成员 t.threadLocals = new ThreadLocalMap(this, firstValue); }
ThreadLocalMap
的构造方法定义如下:
/** * Construct a new map initially containing (firstKey, firstValue). * ThreadLocalMaps are constructed lazily, so we only create * one when we have at least one entry to put in it. */ ThreadLocalMap(ThreadLocal firstKey, Object firstValue) { // 构造table数组,数组大小为INITIAL_CAPACITY table = new Entry[INITIAL_CAPACITY]; // 计算key(ThreadLocal对象)在table中的索引 int i = firstKey.threadLocalHashCode & (INITIAL_CAPACITY - 1); // 用ThreadLocal对象和value来构造entry对象,并放到table的第i个位置 table[i] = new Entry(firstKey, firstValue); size = 1; // 设置table的阈值,当table中元素个数超过该阈值时需要对table // 进行resize,通常在调用ThreadLocalMap的set方法时会发生resize setThreshold(INITIAL_CAPACITY); } /** * Set the resize threshold to maintain at worst a 2/3 load factor. */ private void setThreshold(int len) { threshold = len * 2 / 3; }
这里firstKey.threadLocalHashCode
是ThreadLocal中定义的一个hashcode,使用该hashcode进行hash运算从而找到该ThreadLocal对象对应的entry在table中的索引。
getEntry方法
定义如下:
/** * Get the entry associated with key. This method * itself handles only the fast path: a direct hit of existing * key. It otherwise relays to getEntryAfterMiss. This is * designed to maximize performance for direct hits, in part * by making this method readily inlinable. * * @param key the thread local object * @return the entry associated with key, or null if no such */ private Entry getEntry(ThreadLocal key) { // 根据ThreadLocal的hashcode计算该ThreadLocal对象在table中的位置 int i = key.threadLocalHashCode & (table.length - 1); Entry e = table[i]; // e为null则table不存在key对应的entry; // e.get() != key 可能是由于hash冲突导致key对应的entry在table // 的另外一个位置,需要继续查找 if (e != null && e.get() == key) return e; else // e==null或者e.get() != key 继续查找key对应的entry return getEntryAfterMiss(key, i, e); }
getEntryAfterMiss
方法定义如下:
/** * Version of getEntry method for use when key is not found in * its direct hash slot. * * @param key the thread local object * @param i the table index for key's hash code * @param e the entry at table[i] * @return the entry associated with key, or null if no such */ private Entry getEntryAfterMiss(ThreadLocal key, int i, Entry e){ Entry[] tab = table; int len = tab.length; // 从table的第i个位置一直往后找,直到找到键为key的entry为止 while (e != null) { ThreadLocal k = e.get(); // 若k==key,则找到了entry if (k == key) return e; // k == null 需要删除该entry if (k == null) expungeStaleEntry(i); // k != key && k != null 继续往后寻找,nextIndex就是取(i+1) // 即table中第(i+1)个位置的entry else i = nextIndex(i, len); e = tab[i]; } return null; }
expungeStaleEntry
方法删除key为null的entry,删除后对staleSlot位置的entry和其后第一个为null的entry之间的entry进行一个rehash操作,rehash的目的是降低table发生碰撞的概率:
/** * Expunge a stale entry by rehashing any possibly colliding entries * lying between staleSlot and the next null slot. This also expunges * any other stale entries encountered before the trailing null. See * Knuth, Section 6.4 * * @param staleSlot index of slot known to have null key * @return the index of the next null slot after staleSlot * (all between staleSlot and this slot will have been checked * for expunging). */ private int expungeStaleEntry(int staleSlot) { Entry[] tab = table; int len = tab.length; // expunge entry at staleSlot // 删除staleSlot位置的entry tab[staleSlot].value = null; tab[staleSlot] = null; // table中元素个数减一 size--; // Rehash until we encounter null // 将table中staleSlot处entry和下一个为null的entry之间的 // entry重新进行hash放置到新的位置 // 遇到的entry的key为null则删除该entry Entry e; int i; for (i = nextIndex(staleSlot, len); (e = tab[i]) != null; i = nextIndex(i, len)) { // e是下一个entry ThreadLocal k = e.get(); if (k == null) { // 若entry的key为null,则删除 e.value = null; tab[i] = null; size--; } else { // entry的key不为null,需要将entry放到新的位置 int h = k.threadLocalHashCode & (len - 1); if (h != i) { tab[i] = null; // Unlike Knuth 6.4 Algorithm R, we must scan until // null because multiple entries could have been stale. // tab[h]不为null则发生冲突,继续寻找下一个位置 while (tab[h] != null) h = nextIndex(h, len); tab[h] = e; } } } return i; }
set方法
ThreadLocal的set方法定义如下:
/** * Sets the current thread's copy of this thread-local variable * to the specified value. Most subclasses will have no need to * override this method, relying solely on the {@link #initialValue} * method to set the values of thread-locals. * * @param value the value to be stored in the current thread's copy of * this thread-local. */ public void set(T value) { Thread t = Thread.currentThread(); // 获取当前线程的threadLocals ThreadLocalMap map = getMap(t); // threadLocals不为null直接设置新值 if (map != null) { map.set(this, value); } else { // threadLocals为null则需要创建ThreadLocalMap对象并赋给 // Thread的threadLocals成员 createMap(t, value); } }
createMap
前面已经分析过,接下来分析ThreadLocalMap的set
方法
ThreadLocalMap的set方法
ThreadLocalMap的set方法定义如下,将当前的ThreadLocal对象作为key,传入的value为值,用key和value创建entry,放到table中适当的位置:
/** * Set the value associated with key. * * @param key the thread local object * @param value the value to be set */ private void set(ThreadLocal key, Object value) { // We don't use a fast path as with get() because it is at // least as common to use set() to create new entries as // it is to replace existing ones, in which case, a fast // path would fail more often than not. Entry[] tab = table; int len = tab.length; // 用key计算entry在table中的位置 int i = key.threadLocalHashCode & (len-1); // tab[i]不为null的话,则第i个位置已经存在有效的entry,需要继续 // 往后寻找新的位置 for (Entry e = tab[i]; e != null; e = tab[i = nextIndex(i, len)]) { ThreadLocal k = e.get(); // 找到与key相同的entry,直接更新value的值 if (k == key) { e.value = value; return; } // 遇到key为null的entry,删除该entry if (k == null) { replaceStaleEntry(key, value, i); return; } } // 此时第i个位置entry为null,将新entry放置到这个位置 tab[i] = new Entry(key, value); int sz = ++size; // 试图清除无效的entry,若清除失败并且table中有效entry个数 // 大于threshold,这进行rehash操作 if (!cleanSomeSlots(i, sz) && sz >= threshold) rehash(); }
replaceStaleEntry方法
replaceStaleEntry
的作用是用set方法传过来的key和value构造entry,将这个entry放到staleSlot后面的某个位置:
/** * Replace a stale entry encountered during a set operation * with an entry for the specified key. The value passed in * the value parameter is stored in the entry, whether or not * an entry already exists for the specified key. * * As a side effect, this method expunges all stale entries in the * "run" containing the stale entry. (A run is a sequence of entries * between two null slots.) * * @param key the key * @param value the value to be associated with key * @param staleSlot index of the first stale entry encountered while * searching for key. */ private void replaceStaleEntry(ThreadLocal key, Object value, int staleSlot) { Entry[] tab = table; int len = tab.length; Entry e; // Back up to check for prior stale entry in current run. // We clean out whole runs at a time to avoid continual // incremental rehashing due to garbage collector freeing // up refs in bunches (i.e., whenever the collector runs). // 从staleSlot往前找到第一个key为null的entry的位置 int slotToExpunge = staleSlot; for (int i = prevIndex(staleSlot, len); (e = tab[i]) != null; i = prevIndex(i, len)) if (e.get() == null) slotToExpunge = i; // Find either the key or trailing null slot of run, whichever // occurs first // 从staleSlot位置往后寻找 for (int i = nextIndex(staleSlot, len); (e = tab[i]) != null; i = nextIndex(i, len)) { ThreadLocal k = e.get(); // If we find key, then we need to swap it // with the stale entry to maintain hash table order. // The newly stale slot, or any other stale slot // encountered above it, can then be sent to expungeStaleEntry // to remove or rehash all of the other entries in run. // 若k与key相同,则直接更新value if (k == key) { e.value = value; // 将原来staleSlot位置的entry放置到第i个位置,此时tab[i]处的entry的key为null tab[i] = tab[staleSlot]; tab[staleSlot] = e; // Start expunge at preceding stale entry if it exists // 从staleSlot处往前未找到key为null的entry if (slotToExpunge == staleSlot) // tab[i]处entry的key为null,也即tab[slotToExpunge]处entry的key为null slotToExpunge = i; // 清除slotToExpunge位置的entry并进行rehash操作..... cleanSomeSlots(expungeStaleEntry(slotToExpunge), len); return; } // If we didn't find stale entry on backward scan, the // first stale entry seen while scanning for key is the // first still present in the run. if (k == null && slotToExpunge == staleSlot) slotToExpunge = i; } // If key not found, put new entry in stale slot tab[staleSlot].value = null; tab[staleSlot] = new Entry(key, value); // If there are any other stale entries in run, expunge them if (slotToExpunge != staleSlot) cleanSomeSlots(expungeStaleEntry(slotToExpunge), len); }
以下源码只可意会,不可言传…不再做说明
cleanSomeSlots方法
cleanSomeSlots
方法:
/** * Heuristically scan some cells looking for stale entries. * This is invoked when either a new element is added, or * another stale one has been expunged. It performs a * logarithmic number of scans, as a balance between no * scanning (fast but retains garbage) and a number of scans * proportional to number of elements, that would find all * garbage but would cause some insertions to take O(n) time. * * @param i a position known NOT to hold a stale entry. The * scan starts at the element after i. * * @param n scan control: {@code log2(n)} cells are scanned, * unless a stale entry is found, in which case * {@code log2(table.length)-1} additional cells are scanned. * When called from insertions, this parameter is the number * of elements, but when from replaceStaleEntry, it is the * table length. (Note: all this could be changed to be either * more or less aggressive by weighting n instead of just * using straight log n. But this version is simple, fast, and * seems to work well.) * * @return true if any stale entries have been removed. */ private boolean cleanSomeSlots(int i, int n) { boolean removed = false; Entry[] tab = table; int len = tab.length; do { i = nextIndex(i, len); Entry e = tab[i]; if (e != null && e.get() == null) { n = len; removed = true; i = expungeStaleEntry(i); } } while ( (n >>>= 1) != 0); return removed; }
rehash方法
rehash
方法:
/** * Re-pack and/or re-size the table. First scan the entire * table removing stale entries. If this doesn't sufficiently * shrink the size of the table, double the table size. */ private void rehash() { expungeStaleEntries(); // Use lower threshold for doubling to avoid hysteresis if (size >= threshold - threshold / 4) resize(); }
expungeStaleEntries方法
expungeStaleEntries
方法:
/** * Expunge all stale entries in the table. */ private void expungeStaleEntries() { Entry[] tab = table; int len = tab.length; for (int j = 0; j < len; j++) { Entry e = tab[j]; if (e != null && e.get() == null) expungeStaleEntry(j); } }
resize方法
resize
方法:
/** * Double the capacity of the table. */ private void resize() { Entry[] oldTab = table; int oldLen = oldTab.length; int newLen = oldLen * 2; Entry[] newTab = new Entry[newLen]; int count = 0; for (Entry e : oldTab) { if (e != null) { ThreadLocal k = e.get(); if (k == null) { e.value = null; // Help the GC } else { int h = k.threadLocalHashCode & (newLen - 1); while (newTab[h] != null) h = nextIndex(h, newLen); newTab[h] = e; count++; } } } setThreshold(newLen); size = count; table = newTab; }
更多java相关内容感兴趣的读者可查看本站专题:《Java进程与线程操作技巧总结》、《Java数据结构与算法教程》、《Java操作DOM节点技巧总结》、《Java文件与目录操作技巧汇总》和《Java缓存操作技巧汇总》
希望本文所述对大家java程序设计有所帮助。