如何在QNX系统中挂载U盘

如何在QNX系统中挂载U盘  

2009-01-12 14:38:10|  分类： QNX笔记 |  标签：qnx  |字号 订阅

---

1.运行 io-usb server 。The  io-usb server contains USB protocols and communicates with clients (class drivers). The USB stack is a server/dll interface which the server uses to load the DLLs that manage the USB chips.

#io-usb -duhci -dohci -dehci

---

2.# usb （Display USB device configuration，可选）

---

3. 指定文件系统类型： # fdisk /dev/hd1

FDISK

Ignore Next Prev 1 2 3 4 Change Delete Boot Unboot Restore Loader Save Quit

        _____OS_____     Start      End     ______Number_____    Size    Boot 

        name    type    Cylinder  Cylinder  Cylinders  Blocks                 

--> 1.  QNX6   (179)          1      4095      4095        4095      1 MB

    2.  ______ (___)    _______   _______   _______   _________  _____

    3.  ______ (___)    _______   _______   _______   _________  _____

    4.  ______ (___)    _______   _______   _______   _________  _____

 

 Choose a partition by typing the partition number OR moving the pointer

 with the UP/DOWN arrows.

 Then, choose one of the actions on the top line of the screen.

 

Drive : /dev/hd1                    Config:     1 Heads

Size  : 2 Mbytes                                1 Sectors/track

Loader: Unknown                              4096 Cylinders

                                              512 Block Size

 

                                    Last cylinder is 4095

---

4.更新# mount -e /dev/hd1（Enumerate the children of the special device. ）

---

5.格式化：# dinit -h /dev/hd1t179

All existing files on /dev/hd1t179 will be lost!  Are you sure (y or n) ? y

Using loader /usr/qnx640/target/qnx6/x86/boot/sys/ipl-diskpc2

Disk '/dev/hd1t179' contains 4095 blocks (2047K).

---

6.mount文件系统 # mount /dev/hd1t179 /cf