keepalived(双主模式)+haproxy+mysql_slave

环境说明：

debian系统
keepalived_master1 +haproxy  192.168.7.32
keepalived_master1 +haproxy  192.168.9.52
mysql_master  192.168.6.123
mysql_slave1  192.168.4.21
mysql_slave2  192.168.9.53
vip1:192.168.8.102
vip2:192.168.8.103

一 keepalvied配置
1 keepalived配置文件（master1）：

! Configuration File for keepalived
global_defs {
  notification_email {
    root@localhost
    }

notification_email_from keepalived@localhost
smtp_server 127.0.0.1
smtp_connect_timeout 30
router_id HAproxy237
}

vrrp_script chk_haproxy {                                   #HAproxy 服务监控脚本                    
  script "/etc/keepalived/check_haproxy.sh"
  interval 2
  weight 2
}

vrrp_instance VI_1 {
  state MASTER
  interface eth0
  virtual_router_id 51
  priority 100
  advert_int 1
  authentication {
    auth_type PASS
    auth_pass 1111
}
  track_script {
    chk_haproxy
}
virtual_ipaddress {
    192.168.8.102
}
notify_master "/etc/keepalived/clean_arp.sh 192.168.8.102"
}
vrrp_instance VI_2 {
  state BACKUP
  interface eth0
  virtual_router_id 52
  priority 99
  advert_int 1
  authentication {
    auth_type PASS
    auth_pass 1111
}
virtual_ipaddress {
  192.168.8.103
}
notify_master "/etc/keepalived/clean_arp.sh 192.168.8.103"
}

master2：

! Configuration File for keepalived
global_defs {
  notification_email {
    root@localhost
    }

notification_email_from keepalived@localhost
smtp_server 127.0.0.1
smtp_connect_timeout 30
router_id HAproxy237
}

vrrp_script chk_haproxy {                                   #HAproxy 服务监控脚本                    
  script "/etc/keepalived/check_haproxy.sh"
  interval 2
  weight 2
}

vrrp_instance VI_1 {
  state BACKUP # 这个要跟另一台主机相反
  interface eth0
  virtual_router_id 51
  priority 90 # 
  advert_int 1
  authentication {
    auth_type PASS
    auth_pass 1111
}
  track_script {
    chk_haproxy
}
virtual_ipaddress {
    192.168.8.102
}
notify_master "/etc/keepalived/clean_arp.sh 192.168.8.102"
}
vrrp_instance VI_2 {
  state MASTER  # 这个也要跟另一台主机的相反
  interface eth0
  virtual_router_id 52
  priority 100
  advert_int 1
  authentication {
    auth_type PASS
    auth_pass 1111
}
virtual_ipaddress {
  192.168.8.103
}
notify_master "/etc/keepalived/clean_arp.sh 192.168.8.103"
}

2 检测haproxy的服务是否正常 (两个keepalved上面都需要有这个脚本)

yx@keep-backup:/etc/keepalived$ cat check_haproxy.sh 
#!/bin/bash
A=`ps -C haproxy --no-header | wc -l`
if [ $A -eq 0 ];then
sudo /etc/init.d/haproxy start
sleep 3
if [ `ps -C haproxy --no-header | wc -l ` -eq 0 ];then
sudo /etc/init.d/keepalived stop
fi
fi

3 设置更新虚拟服务器（VIP）地址的arp记录到网关脚本（两台机器都要操作）

#!/bin/sh
VIP=$1
GATEWAY=192.168.11.254                                      #这个是本机的网卡的网关地址
/sbin/arping -I eth0 -c 5 -s $VIP $GATEWAY &>/dev/null

4 启动keepalived服务
master1

master2

二 haproxy安装和配置(见上一篇文章)
1 更改配置文件
2 设置启动脚本
3 启动

三 数据库安装
1 做好主从
2 在两个从数据库上面设置;

在slave1和slave2上分别给两个haproxy机器授权：如果还是报错，再尝试给vip授权

grant all privileges on *.* to 'yx1'@'192.168.7.%' identified by '123456';
grant all privileges on *.* to 'yx1'@'192.168.9.%' identified by '123456';
> flush privileges;
> 

四 测试keepalived+haproxy是否正常运行
1 浏览器访问测试
分别用vip 102和103访问

2 数据查询测试，在客户端上面用102和103分别去查询从数据库上面的东西

#用的8.102 

yx@es-2:~$ mysql -h192.168.8.102 -P3306 -uyx1 -p123456 -e "use test;show tables;"
+----------------+
| Tables_in_test |
+----------------+
| tb1            |
+----------------+
yx@es-2:~$ mysql -h192.168.8.102 -P3306 -uyx1 -p123456 -e "use test;show tables;"
+----------------+
| Tables_in_test |
+----------------+
| tb1            |
| tb2            |
+----------------+

#用 8.103去测试
yx@es-2:~$ mysql -h192.168.8.103 -P3306 -uyx1 -p123456 -e "use test;show tables;"
+----------------+
| Tables_in_test |
+----------------+
| tb1            |
+----------------+
yx@es-2:~$ mysql -h192.168.8.103 -P3306 -uyx1 -p123456 -e "use test;show tables;"
+----------------+
| Tables_in_test |
+----------------+
| tb1            |
| tb2            |
+----------------+

3 停掉其中一台keepalvied服务，再次进行上面的两步测试，发现还是正常的，
4 停掉其中的haproxy服务，发现haproxy会立马再启动起来，前提是keepalived服务在运行，这是因为通过那个检查脚本实现的