Android线程管理（二）——ActivityThread

上文分析了Handler、MessageQueue、Message及Looper四者的关系，本文将对Android中最重要的线程——ActivityThread进行说明。

二、ActivityThread的主要工作及实现机制

ActivityThread是Android应用的主线程（UI线程），说起ActivityThread，不得不提到Activity的创建、启动过程以及ActivityManagerService，但本文将仅从线程管理的角度来分析ActivityThread。ActivityManagerService、ActivityStack、ApplicationThread等会在后续文章中详细分析，敬请期待喔~~不过为了说清楚ActivityThread的由来，还是需要简单介绍下。

以下引用自罗升阳大师的博客：《Android应用程序的Activity启动过程简要介绍和学习计划》

Step 1. 无论是通过Launcher来启动Activity，还是通过Activity内部调用startActivity接口来启动新的Activity，都通过Binder进程间通信进入到ActivityManagerService进程中，并且调用ActivityManagerService.startActivity接口；
Step 2. ActivityManagerService调用ActivityStack.startActivityMayWait来做准备要启动的Activity的相关信息；
Step 3. ActivityStack通知ApplicationThread要进行Activity启动调度了，这里的ApplicationThread代表的是调用ActivityManagerService.startActivity接口的进程，对于通过点击应用程序图标的情景来说，这个进程就是Launcher了，而对于通过在Activity内部调用startActivity的情景来说，这个进程就是这个Activity所在的进程了；
Step 4. ApplicationThread不执行真正的启动操作，它通过调用ActivityManagerService.activityPaused接口进入到ActivityManagerService进程中，看看是否需要创建新的进程来启动Activity；
Step 5. 对于通过点击应用程序图标来启动Activity的情景来说，ActivityManagerService在这一步中，会调用startProcessLocked来创建一个新的进程，而对于通过在Activity内部调用startActivity来启动新的Activity来说，这一步是不需要执行的，因为新的Activity就在原来的Activity所在的进程中进行启动；
Step 6. ActivityManagerServic调用ApplicationThread.scheduleLaunchActivity接口，通知相应的进程执行启动Activity的操作；
Step 7. ApplicationThread把这个启动Activity的操作转发给ActivityThread，ActivityThread通过ClassLoader导入相应的Activity类，然后把它启动起来。

大师的这段描述把ActivityManagerService、ActivityStack、ApplicationThread及ActivityThread的调用关系讲的很清楚，本文将从ActivityThread的main()方法开始分析其主要工作及实现机制。（如有需要，可前往ActivityThread源码）

public static void main(String[] args) {
    Trace.traceBegin(Trace.TRACE_TAG_ACTIVITY_MANAGER, "ActivityThreadMain");
    SamplingProfilerIntegration.start();

    // CloseGuard defaults to true and can be quite spammy.  We
    // disable it here, but selectively enable it later (via
    // StrictMode) on debug builds, but using DropBox, not logs.
    CloseGuard.setEnabled(false);

    Environment.initForCurrentUser();

    // Set the reporter for event logging in libcore
    EventLogger.setReporter(new EventLoggingReporter());

    AndroidKeyStoreProvider.install();

    // Make sure TrustedCertificateStore looks in the right place for CA certificates
    final File configDir = Environment.getUserConfigDirectory(UserHandle.myUserId());
    TrustedCertificateStore.setDefaultUserDirectory(configDir);

    Process.setArgV0("");

    Looper.prepareMainLooper();

    ActivityThread thread = new ActivityThread();
    thread.attach(false);

    if (sMainThreadHandler == null) {
        sMainThreadHandler = thread.getHandler();
    }

    if (false) {
        Looper.myLooper().setMessageLogging(new
                LogPrinter(Log.DEBUG, "ActivityThread"));
    }

    // End of event ActivityThreadMain.
    Trace.traceEnd(Trace.TRACE_TAG_ACTIVITY_MANAGER);
    Looper.loop();

    throw new RuntimeException("Main thread loop unexpectedly exited");
}

上述代码中，从Looper.prepareMainLooper()到Looper.loop()的代码主要用于环境初始化、AndroidKeyStoreProvider安装等，这里不做重点说明。红色部分的代码主要分为两个功能块：1）绑定应用进程到ActivityManagerService；2）主线程Handler消息处理。
关于线程通信机制，Handler、MessageQueue、Message及Looper四者的关系请参考上一篇文章《Android线程管理——线程通信》。

2.1 应用进程绑定

main()方法通过thread.attach(false)绑定应用进程。ActivityManagerNative通过getDefault()方法返回ActivityManagerService实例，ActivityManagerService通过attachApplication将ApplicationThread对象绑定到ActivityManagerService，而ApplicationThread作为Binder实现ActivityManagerService对应用进程的通信和控制。

private void attach(boolean system) {
    sCurrentActivityThread = this;
    mSystemThread = system;
    if (!system) {
        ……            
        RuntimeInit.setApplicationObject(mAppThread.asBinder());
        final IActivityManager mgr = ActivityManagerNative.getDefault();
        try {
            mgr.attachApplication(mAppThread);
        } catch (RemoteException ex) {
            // Ignore
        }
        ……        
    } else {}
}

在ActivityManagerService内部，attachApplication实际是通过调用attachApplicationLocked实现的，这里采用了synchronized关键字保证同步。

@Override
public final void attachApplication(IApplicationThread thread) {
    synchronized (this) {
        int callingPid = Binder.getCallingPid();
        final long origId = Binder.clearCallingIdentity();
        attachApplicationLocked(thread, callingPid);
        Binder.restoreCallingIdentity(origId);
    }
}

attachApplicationLocked的实现较为复杂，其主要功能分为两部分：

• thread.bindApplication
• mStackSupervisor.attachApplicationLocked(app)

private final boolean attachApplicationLocked(IApplicationThread thread,
        int pid) {

    // Find the application record that is being attached...  either via
    // the pid if we are running in multiple processes, or just pull the
    // next app record if we are emulating process with anonymous threads.
    ProcessRecord app;
    if (pid != MY_PID && pid >= 0) {
        synchronized (mPidsSelfLocked) {
            app = mPidsSelfLocked.get(pid);
        }
    } else {
        app = null;
    }
   // ……
    try {
       // ……
        thread.bindApplication(processName, appInfo, providers, app.instrumentationClass,
                profilerInfo, app.instrumentationArguments, app.instrumentationWatcher,
                app.instrumentationUiAutomationConnection, testMode, enableOpenGlTrace,
                enableTrackAllocation, isRestrictedBackupMode || !normalMode, app.persistent,
                new Configuration(mConfiguration), app.compat,
                getCommonServicesLocked(app.isolated),
                mCoreSettingsObserver.getCoreSettingsLocked());
        updateLruProcessLocked(app, false, null);
        app.lastRequestedGc = app.lastLowMemory = SystemClock.uptimeMillis();
    } catch (Exception e) {
        // todo: Yikes!  What should we do?  For now we will try to
        // start another process, but that could easily get us in
        // an infinite loop of restarting processes...
        Slog.wtf(TAG, "Exception thrown during bind of " + app, e);

        app.resetPackageList(mProcessStats);
        app.unlinkDeathRecipient();
        startProcessLocked(app, "bind fail", processName);
        return false;
    }

    // See if the top visible activity is waiting to run in this process...
    if (normalMode) {
        try {
            if (mStackSupervisor.attachApplicationLocked(app)) {
                didSomething = true;
            }
        } catch (Exception e) {
            Slog.wtf(TAG, "Exception thrown launching activities in " + app, e);
            badApp = true;
        }
    }
// ……
}

thread对象其实是ActivityThread里ApplicationThread对象在ActivityManagerService的代理对象，故此执行thread.bindApplication，最终会调用ApplicationThread的bindApplication方法。该bindApplication方法的实质是通过向ActivityThread的消息队列发送BIND_APPLICATION消息，消息的处理调用handleBindApplication方法，handleBindApplication方法比较重要的是会调用如下方法：

mInstrumentation.callApplicationOnCreate(app);

callApplicationOnCreate即调用应用程序Application的onCreate()方法，说明Application的onCreate()方法会比所有activity的onCreate()方法先调用。

mStackSupervisor为ActivityManagerService的成员变量，类型为ActivityStackSupervisor。

/** Run all ActivityStacks through this */
ActivityStackSupervisor mStackSupervisor;

从注释可以看出，mStackSupervisor为Activity堆栈管理辅助类实例。ActivityStackSupervisor的attachApplicationLocked()方法的调用了realStartActivityLocked()方法，在realStartActivityLocked()方法中，会调用scheduleLaunchActivity()方法：

final boolean realStartActivityLocked(ActivityRecord r,
        ProcessRecord app, boolean andResume, boolean checkConfig)
        throws RemoteException {
 
    //...  
    try {
        //...
        app.thread.scheduleLaunchActivity(new Intent(r.intent), r.appToken,
                System.identityHashCode(r), r.info,
                new Configuration(mService.mConfiguration),
                r.compat, r.icicle, results, newIntents, !andResume,
                mService.isNextTransitionForward(), profileFile, profileFd,
                profileAutoStop);
 
        //...
 
    } catch (RemoteException e) {
        //...
    }
    //...    
    return true;
}

app.thread也是ApplicationThread对象在ActivityManagerService的一个代理对象，最终会调用ApplicationThread的scheduleLaunchActivity方法。

// we use token to identify this activity without having to send the
// activity itself back to the activity manager. (matters more with ipc)
@Override
public final void scheduleLaunchActivity(Intent intent, IBinder token, int ident,
    ActivityInfo info, Configuration curConfig, Configuration overrideConfig,
    CompatibilityInfo compatInfo, String referrer, IVoiceInteractor voiceInteractor,
    int procState, Bundle state, PersistableBundle persistentState,
    List pendingResults, List pendingNewIntents,
    boolean notResumed, boolean isForward, ProfilerInfo profilerInfo) {

        updateProcessState(procState, false);

        ActivityClientRecord r = new ActivityClientRecord();

        ……
        sendMessage(H.LAUNCH_ACTIVITY, r);
}

同bindApplication()方法，最终是通过向ActivityThread的消息队列发送消息，在ActivityThread完成实际的LAUNCH_ACTIVITY的操作。

public void handleMessage(Message msg) {
    if (DEBUG_MESSAGES) Slog.v(TAG, ">>> handling: " + codeToString(msg.what));
    switch (msg.what) {
        case LAUNCH_ACTIVITY: {
            Trace.traceBegin(Trace.TRACE_TAG_ACTIVITY_MANAGER, "activityStart");
            final ActivityClientRecord r = (ActivityClientRecord) msg.obj;

            r.packageInfo = getPackageInfoNoCheck(
                r.activityInfo.applicationInfo, r.compatInfo);
            handleLaunchActivity(r, null);
            Trace.traceEnd(Trace.TRACE_TAG_ACTIVITY_MANAGER);
            } break;
    ……
}

handleLaunchActivity()用于启动Activity。具体的启动流程不在这里详述了，这里重点说明ApplicationThread及ActivityThread的线程通信机制。

2.2 主线程消息处理

在《Android线程管理——线程通信》中谈到了普通线程中Handler、MessageQueue、Message及Looper四者的关系，那么，ActivityThread中的线程通信又有什么不同呢？不同之处主要表现为两点：1）Looper的初始化方式；2）Handler生成。

首先，ActivityThread通过Looper.prepareMainLooper()初始化Looper，为了直观比较ActivityThread与普通线程初始化Looper的区别，把两种初始化方法放在一起：

/** Initialize the current thread as a looper.
  * This gives you a chance to create handlers that then reference
  * this looper, before actually starting the loop. Be sure to call
  * {@link #loop()} after calling this method, and end it by calling
  * {@link #quit()}.
  */
public static void prepare() {
    prepare(true);
}

private static void prepare(boolean quitAllowed) {
    if (sThreadLocal.get() != null) {
        throw new RuntimeException("Only one Looper may be created per thread");
    }
    sThreadLocal.set(new Looper(quitAllowed));
}

/**
 * Initialize the current thread as a looper, marking it as an
 * application's main looper. The main looper for your application
 * is created by the Android environment, so you should never need
 * to call this function yourself.  See also: {@link #prepare()}
 */
public static void prepareMainLooper() {
    prepare(false);
    synchronized (Looper.class) {
        if (sMainLooper != null) {
            throw new IllegalStateException("The main Looper has already been prepared.");
        }
        sMainLooper = myLooper();
    }
}

• 普通线程的prepare()方法默认quitAllowed参数为true，表示允许退出，ActivityThread在prepareMainLooper()方法中调用prepare()方法，参数为false，表示主线程不允许退出。
• 普通线程只调用prepare()方法，ActivityThread在调用完prepare()方法之后，会通过myLooper()方法将本地线程的Looper对象的引用交给sMainLooper。myLooper()其实就是调用sThreadLocal的get()方法实现的。

/**
 * Return the Looper object associated with the current thread.  Returns
 * null if the calling thread is not associated with a Looper.
 */
public static Looper myLooper() {
    return sThreadLocal.get();
}

• 之所以要通过sMainLooper指向ActivityThread的Looper对象，就是希望通过getMainLooper()方法将主线程的Looper对象开放给其他线程。

/** Returns the application's main looper, which lives in the main thread of the application.*/
public static Looper getMainLooper() {
    synchronized (Looper.class) {
        return sMainLooper;
    }
}

其次，ActivityThread与普通线程的Handler生成方式也不一样。普通线程生成一个与Looper绑定的Handler即可，ActivityThread通过sMainThreadHandler指向getHandler()的返回值，而getHandler()方法返回的其实是一个继承Handler的H对象。

private class H extends Handler {
    ……
}

final H mH = new H();

final Handler getHandler() {
    return mH;
}

真正实现消息机制“通”信的其实是Looper的loop()方法，loop()方法的核心实现如下：

/**
 * Run the message queue in this thread. Be sure to call
 * {@link #quit()} to end the loop.
 */
public static void loop() {
    final Looper me = myLooper();
    if (me == null) {
        throw new RuntimeException("No Looper; Looper.prepare() wasn't called on this thread.");
    }
    final MessageQueue queue = me.mQueue;

    // Make sure the identity of this thread is that of the local process,
    // and keep track of what that identity token actually is.
    Binder.clearCallingIdentity();
    final long ident = Binder.clearCallingIdentity();

    for (;;) {
        Message msg = queue.next(); // might block
        if (msg == null) {
            // No message indicates that the message queue is quitting.
            return;
        }

        // This must be in a local variable, in case a UI event sets the logger
        Printer logging = me.mLogging;
        if (logging != null) {
            logging.println(">>>>> Dispatching to " + msg.target + " " +
                    msg.callback + ": " + msg.what);
        }

        msg.target.dispatchMessage(msg);

        if (logging != null) {
            logging.println("<<<<< Finished to " + msg.target + " " + msg.callback);
        }

        // Make sure that during the course of dispatching the
        // identity of the thread wasn't corrupted.
        final long newIdent = Binder.clearCallingIdentity();
        if (ident != newIdent) {
            Log.wtf(TAG, "Thread identity changed from 0x"
                    + Long.toHexString(ident) + " to 0x"
                    + Long.toHexString(newIdent) + " while dispatching to "
                    + msg.target.getClass().getName() + " "
                    + msg.callback + " what=" + msg.what);
        }

        msg.recycle();
    }
}

大致流程如下：

• 首先通过上述myLooper()方法获取Looper对象，取出Looper持有的MessageQueue；
• 然后从MessageQueue取出Message，如果Message为null，说明线程正在退出；
• Message不为空，则调用Message的target handler对该Message进行分发，具体分发、处理流程可参考《Android线程管理——线程通信》；
• 消息处理完毕，调用recycle()方法进行回收。