简单无锁队列的实现和使用
无锁队列越来越流行，在特定的场合使用不同的无锁队列，可以起到节省锁开销，提高程序效率。
Linux内核中有无锁队列的实现，可谓简洁而不简单。核心判断部分利用了整数溢出机制，这个有很多文章专门介绍，我们就不详细讲了。
里面注释很详细，直接来kfifo的源码，大家看源码注释应该就可以理解了。源代码是linux上实现的，为了跨平台，增加了其他平台下的实现。
#include
#include
#include
#define __u32 unsigned long
#define __u64 unsigned long long
#if defined(__GNUC__)
#define min(x,y) ({ \
typeof(x) _x = (x); \
typeof(y) _y = (y); \
(void) (&_x == &_y);\
_x < _y ? _x : _y; })
#define max(x,y) ({ \
typeof(x) _x = (x); \
typeof(y) _y = (y); \
(void) (&_x == &_y);\
_x > _y ? _x : _y; })
#else
#define max(a,b) (((a) > (b)) ? (a) : (b))
#define min(a,b) (((a) < (b)) ? (a) : (b))
#endif
#define MAX_KFIFO_SIZE 0x1000
struct kfifo {
unsigned char *buffer; /* the buffer holding the data */
unsigned int size; /* the size of the allocated buffer */
unsigned int in; /* data is added at offset (in % size) */
unsigned int out; /* data is extracted from off. (out % size) */
};
/**
* fls - find last bit set
* @x: the word to search
*
* This is defined the same way as ffs:
* - return 32..1 to indicate bit 31..0 most significant bit set
* - return 0 to indicate no bits set
*/
#if defined(__GNUC__)
static inline int fls(int x)
{
int r;
__asm__("bsrl %1,%0\n\t"
"jnz 1f\n\t"
"movl $-1,%0\n"
"1:" : "=r" (r) : "rm" (x));
return r+1;
}
#else
static inline int fls(int x)
{
int position;
int i;
if(0 != x)
{
for (i = (x >> 1), position = 0; i != 0; ++position)
i >>= 1;
}
else
{
position = -1;
}
return position+1;
}
#endif
/**
* fls64 - find last bit set in a 64-bit value
* @n: the value to search
*
* This is defined the same way as ffs:
* - return 64..1 to indicate bit 63..0 most significant bit set
* - return 0 to indicate no bits set
*/
static inline int fls64(__u64 x)
{
__u32 h = x >> 32;
if (h)
return fls(h) + 32;
return fls(x);
}
static inline unsigned fls_long(unsigned long l)
{
if (sizeof(l) == 4)
return fls(l);
return fls64(l);
}
static inline unsigned long roundup_pow_of_two(unsigned long x)
{
return 1UL << fls_long(x - 1);
}
/**
* * kfifo_alloc - allocates a new FIFO and its internal buffer
* * @size: the size of the internal buffer to be allocated.
* * @gfp_mask: get_free_pages mask, passed to kmalloc()
* * @lock: the lock to be used to protect the fifo buffer
* *
* * The size will be rounded-up to a power of 2.
* */
struct kfifo *kfifo_alloc(unsigned int size)
{
unsigned char *buffer;
struct kfifo *fifo;
/*
* * round up to the next power of 2, since our 'let the indices
* * wrap' tachnique works only in this case.
* */
if (size & (size - 1)) {
if(size > 0x80000000);
return NULL;
size = roundup_pow_of_two(size);
}
buffer = (unsigned char *)malloc(size);
if (!buffer)
return NULL;
fifo = (struct kfifo*)malloc(sizeof(struct kfifo));
if (!fifo)
{
free(buffer);
return NULL;
}
fifo->buffer = buffer;
fifo->size = size;
fifo->in = fifo->out = 0;
return fifo;
}
/**
* * kfifo_free - frees the FIFO
* * @fifo: the fifo to be freed.
* */
void kfifo_free(struct kfifo *fifo)
{
free(fifo->buffer);
free(fifo);
}
/**
* __kfifo_put - puts some data into the FIFO, no locking version
* @fifo: the fifo to be used.
* @buffer: the data to be added.
* @len: the length of the data to be added.
*
* This function copies at most @len bytes from the @buffer into
* the FIFO depending on the free space, and returns the number of
* bytes copied.
*
* Note that with only one concurrent reader and one concurrent
* writer, you don't need extra locking to use these functions.
*/
unsigned int __kfifo_put(struct kfifo *fifo,
const unsigned char *buffer, unsigned int len)
{
unsigned int l;
len = min(len, fifo->size - fifo->in + fifo->out);
/* first put the data starting from fifo->in to buffer end */
l = min(len, fifo->size - (fifo->in & (fifo->size - 1)));
memcpy(fifo->buffer + (fifo->in & (fifo->size - 1)), buffer, l);
/* then put the rest (if any) at the beginning of the buffer */
memcpy(fifo->buffer, buffer + l, len - l);
fifo->in += len;
return len;
}
/**
* __kfifo_get - gets some data from the FIFO, no locking version
* @fifo: the fifo to be used.
* @buffer: where the data must be copied.
* @len: the size of the destination buffer.
*
* This function copies at most @len bytes from the FIFO into the
* @buffer and returns the number of copied bytes.
*
* Note that with only one concurrent reader and one concurrent
* writer, you don't need extra locking to use these functions.
*/
unsigned int __kfifo_get(struct kfifo *fifo,
unsigned char *buffer, unsigned int len)
{
unsigned int l;
len = min(len, fifo->in - fifo->out);
/* first get the data from fifo->out until the end of the buffer */
l = min(len, fifo->size - (fifo->out & (fifo->size - 1)));
memcpy(buffer, fifo->buffer + (fifo->out & (fifo->size - 1)), l);
/* then get the rest (if any) from the beginning of the buffer */
memcpy(buffer + l, fifo->buffer, len - l);
fifo->out += len;
return len;
}
/**
* __kfifo_reset - removes the entire FIFO contents, no locking version
* @fifo: the fifo to be emptied.
*/
static inline void __kfifo_reset(struct kfifo *fifo)
{
fifo->in = fifo->out = 0;
}
/**
* __kfifo_len - returns the number of bytes available in the FIFO, no locking version
* @fifo: the fifo to be used.
*/
static inline unsigned int __kfifo_len(struct kfifo *fifo)
{
return fifo->in - fifo->out;
} template
class zFifo
{
private:
kfifo* _kfifo;
public:
zFifo()
{
_kfifo = kfifo_alloc(MAX_KFIFO_SIZE);
}
~zFifo()
{
if(NULL != _kfifo)
kfifo_free(_kfifo);
}
bool push(T data);
T get();
};
template
bool zFifo::push(T data)
{
int len = 0;
len = __kfifo_put(_kfifo, (const unsigned char *)&data, sizeof(T));
if(len > 0)
return true;
else
return false;
}
template
T zFifo::get()
{
T data;
int len = __kfifo_get(_kfifo, (unsigned char *)&data, sizeof(T));
if(len > 0)
return data;
else
return NULL;
} 这种库一般都用在需要高效处理的地方，为了减少内存拷贝，一般都使用指针的形式操作。一个简单的使用例子：
int main()
{
zFifo zf;
int a = 1;
zf.push(&a);
printf("a=%d\n", &a);
int* b = NULL;
b = zf.get();
printf("b=%d\n", b);
return 0;
} 1.只有一个线程负责读，另一个线程负责写的时候，数据是线程安全的。上面的实现是基于这个原理实现的，当有多个线程读或者多个线程写的时候，不保证数据的正确性。
所以使用的时候，一个线程写，一个线程读。网络应用中比较常用，就是开一个线程接口数据，然后把数据写入队列。然后开一个调度线程读取网络数据，然后分发到处理线程。
2.数据长度默认宏定义了一个长度，超过这个长度的时候，后续的数据会写入失败。