华为交换机con0,telnet,vlan,trunk,access配置案例

aaa  //AAA认证配置
 authentication-scheme default
 authorization-scheme default
 accounting-scheme default
 domain default
 domain default_admin
 local-user admin password irreversible-cipher mima //设置密码为mima新版本中,必须要irreversible-cipher,原来cipher已经不允许登陆了
 local-user admin privilege level 15
 local-user admin service-type telnet terminal
interface Vlanif1  //配置telnet管理地址
 ip address 10.1.0.6 255.255.255.0
interface GigabitEthernet0/0/1  //接入口配置,根据需求配置
 port link-type access
 port default vlan 3
 mac-authen max-user 1
 ip source check user-bind enable
ip route-static 0.0.0.0 0.0.0.0 10.1.0.2 //设置默认路由
user-interface con 0 //设置console口
 authentication-mode password
 set authentication password cipher mima
user-interface vty 0 4
 authentication-mode aaa
 protocol inbound all
interface GigabitEthernet0/0/25 //上行口配置
 port link-type trunk  //接口传输模式为trunk
 port trunk allow-pass vlan 2 to 4094 //允许vlan通信
 如果有光口的,在光口也配置这两条

你可能感兴趣的:(Huawei)