在libavformat/options_table.h中有如下参数定义:
static const AVOption avformat_options[] = {
{"avioflags", NULL, OFFSET(avio_flags), AV_OPT_TYPE_FLAGS, {.i64 = DEFAULT }, INT_MIN, INT_MAX, D|E, "avioflags"},
{"direct", "reduce buffering", 0, AV_OPT_TYPE_CONST, {.i64 = AVIO_FLAG_DIRECT }, INT_MIN, INT_MAX, D|E, "avioflags"},
{"probesize", "set probing size", OFFSET(probesize), AV_OPT_TYPE_INT64, {.i64 = 5000000 }, 32, INT64_MAX, D},
{"formatprobesize", "number of bytes to probe file format", OFFSET(format_probesize), AV_OPT_TYPE_INT, {.i64 = PROBE_BUF_MAX}, 0, INT_MAX-1, D},
{"packetsize", "set packet size", OFFSET(packet_size), AV_OPT_TYPE_INT, {.i64 = DEFAULT }, 0, INT_MAX, E},
{"fflags", NULL, OFFSET(flags), AV_OPT_TYPE_FLAGS, {.i64 = AVFMT_FLAG_AUTO_BSF }, INT_MIN, INT_MAX, D|E, "fflags"},
{"flush_packets", "reduce the latency by flushing out packets immediately", 0, AV_OPT_TYPE_CONST, {.i64 = AVFMT_FLAG_FLUSH_PACKETS }, INT_MIN, INT_MAX, E, "fflags"},
{"ignidx", "ignore index", 0, AV_OPT_TYPE_CONST, {.i64 = AVFMT_FLAG_IGNIDX }, INT_MIN, INT_MAX, D, "fflags"},
{"genpts", "generate pts", 0, AV_OPT_TYPE_CONST, {.i64 = AVFMT_FLAG_GENPTS }, INT_MIN, INT_MAX, D, "fflags"},
{"nofillin", "do not fill in missing values that can be exactly calculated", 0, AV_OPT_TYPE_CONST, {.i64 = AVFMT_FLAG_NOFILLIN }, INT_MIN, INT_MAX, D, "fflags"},
{"noparse", "disable AVParsers, this needs nofillin too", 0, AV_OPT_TYPE_CONST, {.i64 = AVFMT_FLAG_NOPARSE }, INT_MIN, INT_MAX, D, "fflags"},
{"igndts", "ignore dts", 0, AV_OPT_TYPE_CONST, {.i64 = AVFMT_FLAG_IGNDTS }, INT_MIN, INT_MAX, D, "fflags"},
{"discardcorrupt", "discard corrupted frames", 0, AV_OPT_TYPE_CONST, {.i64 = AVFMT_FLAG_DISCARD_CORRUPT }, INT_MIN, INT_MAX, D, "fflags"},
{"sortdts", "try to interleave outputted packets by dts", 0, AV_OPT_TYPE_CONST, {.i64 = AVFMT_FLAG_SORT_DTS }, INT_MIN, INT_MAX, D, "fflags"},
#if FF_API_LAVF_KEEPSIDE_FLAG
{"keepside", "deprecated, does nothing", 0, AV_OPT_TYPE_CONST, {.i64 = AVFMT_FLAG_KEEP_SIDE_DATA }, INT_MIN, INT_MAX, D, "fflags"},
#endif
{"fastseek", "fast but inaccurate seeks", 0, AV_OPT_TYPE_CONST, {.i64 = AVFMT_FLAG_FAST_SEEK }, INT_MIN, INT_MAX, D, "fflags"},
#if FF_API_LAVF_MP4A_LATM
{"latm", "deprecated, does nothing", 0, AV_OPT_TYPE_CONST, {.i64 = AVFMT_FLAG_MP4A_LATM }, INT_MIN, INT_MAX, E, "fflags"},
#endif
{"nobuffer", "reduce the latency introduced by optional buffering", 0, AV_OPT_TYPE_CONST, {.i64 = AVFMT_FLAG_NOBUFFER }, 0, INT_MAX, D, "fflags"},
{"bitexact", "do not write random/volatile data", 0, AV_OPT_TYPE_CONST, { .i64 = AVFMT_FLAG_BITEXACT }, 0, 0, E, "fflags" },
{"shortest", "stop muxing with the shortest stream", 0, AV_OPT_TYPE_CONST, { .i64 = AVFMT_FLAG_SHORTEST }, 0, 0, E, "fflags" },
{"autobsf", "add needed bsfs automatically", 0, AV_OPT_TYPE_CONST, { .i64 = AVFMT_FLAG_AUTO_BSF }, 0, 0, E, "fflags" },
{"seek2any", "allow seeking to non-keyframes on demuxer level when supported", OFFSET(seek2any), AV_OPT_TYPE_BOOL, {.i64 = 0 }, 0, 1, D},
{"analyzeduration", "specify how many microseconds are analyzed to probe the input", OFFSET(max_analyze_duration), AV_OPT_TYPE_INT64, {.i64 = 0 }, 0, INT64_MAX, D},
{"cryptokey", "decryption key", OFFSET(key), AV_OPT_TYPE_BINARY, {.dbl = 0}, 0, 0, D},
{"indexmem", "max memory used for timestamp index (per stream)", OFFSET(max_index_size), AV_OPT_TYPE_INT, {.i64 = 1<<20 }, 0, INT_MAX, D},
{"rtbufsize", "max memory used for buffering real-time frames", OFFSET(max_picture_buffer), AV_OPT_TYPE_INT, {.i64 = 3041280 }, 0, INT_MAX, D}, /* defaults to 1s of 15fps 352x288 YUYV422 video */
{"fdebug", "print specific debug info", OFFSET(debug), AV_OPT_TYPE_FLAGS, {.i64 = DEFAULT }, 0, INT_MAX, E|D, "fdebug"},
{"ts", NULL, 0, AV_OPT_TYPE_CONST, {.i64 = FF_FDEBUG_TS }, INT_MIN, INT_MAX, E|D, "fdebug"},
{"max_delay", "maximum muxing or demuxing delay in microseconds", OFFSET(max_delay), AV_OPT_TYPE_INT, {.i64 = -1 }, -1, INT_MAX, E|D},
{"start_time_realtime", "wall-clock time when stream begins (PTS==0)", OFFSET(start_time_realtime), AV_OPT_TYPE_INT64, {.i64 = AV_NOPTS_VALUE}, INT64_MIN, INT64_MAX, E},
{"fpsprobesize", "number of frames used to probe fps", OFFSET(fps_probe_size), AV_OPT_TYPE_INT, {.i64 = -1}, -1, INT_MAX-1, D},
{"audio_preload", "microseconds by which audio packets should be interleaved earlier", OFFSET(audio_preload), AV_OPT_TYPE_INT, {.i64 = 0}, 0, INT_MAX-1, E},
{"chunk_duration", "microseconds for each chunk", OFFSET(max_chunk_duration), AV_OPT_TYPE_INT, {.i64 = 0}, 0, INT_MAX-1, E},
{"chunk_size", "size in bytes for each chunk", OFFSET(max_chunk_size), AV_OPT_TYPE_INT, {.i64 = 0}, 0, INT_MAX-1, E},
/* this is a crutch for avconv, since it cannot deal with identically named options in different contexts.
* to be removed when avconv is fixed */
{"f_err_detect", "set error detection flags (deprecated; use err_detect, save via avconv)", OFFSET(error_recognition), AV_OPT_TYPE_FLAGS, {.i64 = AV_EF_CRCCHECK }, INT_MIN, INT_MAX, D, "err_detect"},
{"err_detect", "set error detection flags", OFFSET(error_recognition), AV_OPT_TYPE_FLAGS, {.i64 = AV_EF_CRCCHECK }, INT_MIN, INT_MAX, D, "err_detect"},
{"crccheck", "verify embedded CRCs", 0, AV_OPT_TYPE_CONST, {.i64 = AV_EF_CRCCHECK }, INT_MIN, INT_MAX, D, "err_detect"},
{"bitstream", "detect bitstream specification deviations", 0, AV_OPT_TYPE_CONST, {.i64 = AV_EF_BITSTREAM }, INT_MIN, INT_MAX, D, "err_detect"},
{"buffer", "detect improper bitstream length", 0, AV_OPT_TYPE_CONST, {.i64 = AV_EF_BUFFER }, INT_MIN, INT_MAX, D, "err_detect"},
{"explode", "abort decoding on minor error detection", 0, AV_OPT_TYPE_CONST, {.i64 = AV_EF_EXPLODE }, INT_MIN, INT_MAX, D, "err_detect"},
{"ignore_err", "ignore errors", 0, AV_OPT_TYPE_CONST, {.i64 = AV_EF_IGNORE_ERR }, INT_MIN, INT_MAX, D, "err_detect"},
{"careful", "consider things that violate the spec, are fast to check and have not been seen in the wild as errors", 0, AV_OPT_TYPE_CONST, {.i64 = AV_EF_CAREFUL }, INT_MIN, INT_MAX, D, "err_detect"},
{"compliant", "consider all spec non compliancies as errors", 0, AV_OPT_TYPE_CONST, {.i64 = AV_EF_COMPLIANT }, INT_MIN, INT_MAX, D, "err_detect"},
{"aggressive", "consider things that a sane encoder shouldn't do as an error", 0, AV_OPT_TYPE_CONST, {.i64 = AV_EF_AGGRESSIVE }, INT_MIN, INT_MAX, D, "err_detect"},
{"use_wallclock_as_timestamps", "use wallclock as timestamps", OFFSET(use_wallclock_as_timestamps), AV_OPT_TYPE_BOOL, {.i64 = 0}, 0, 1, D},
{"skip_initial_bytes", "set number of bytes to skip before reading header and frames", OFFSET(skip_initial_bytes), AV_OPT_TYPE_INT64, {.i64 = 0}, 0, INT64_MAX-1, D},
{"correct_ts_overflow", "correct single timestamp overflows", OFFSET(correct_ts_overflow), AV_OPT_TYPE_BOOL, {.i64 = 1}, 0, 1, D},
{"flush_packets", "enable flushing of the I/O context after each packet", OFFSET(flush_packets), AV_OPT_TYPE_INT, {.i64 = -1}, -1, 1, E},
{"metadata_header_padding", "set number of bytes to be written as padding in a metadata header", OFFSET(metadata_header_padding), AV_OPT_TYPE_INT, {.i64 = -1}, -1, INT_MAX, E},
{"output_ts_offset", "set output timestamp offset", OFFSET(output_ts_offset), AV_OPT_TYPE_DURATION, {.i64 = 0}, -INT64_MAX, INT64_MAX, E},
{"max_interleave_delta", "maximum buffering duration for interleaving", OFFSET(max_interleave_delta), AV_OPT_TYPE_INT64, { .i64 = 10000000 }, 0, INT64_MAX, E },
{"f_strict", "how strictly to follow the standards (deprecated; use strict, save via avconv)", OFFSET(strict_std_compliance), AV_OPT_TYPE_INT, {.i64 = DEFAULT }, INT_MIN, INT_MAX, D|E, "strict"},
{"strict", "how strictly to follow the standards", OFFSET(strict_std_compliance), AV_OPT_TYPE_INT, {.i64 = DEFAULT }, INT_MIN, INT_MAX, D|E, "strict"},
{"very", "strictly conform to a older more strict version of the spec or reference software", 0, AV_OPT_TYPE_CONST, {.i64 = FF_COMPLIANCE_VERY_STRICT }, INT_MIN, INT_MAX, D|E, "strict"},
{"strict", "strictly conform to all the things in the spec no matter what the consequences", 0, AV_OPT_TYPE_CONST, {.i64 = FF_COMPLIANCE_STRICT }, INT_MIN, INT_MAX, D|E, "strict"},
{"normal", NULL, 0, AV_OPT_TYPE_CONST, {.i64 = FF_COMPLIANCE_NORMAL }, INT_MIN, INT_MAX, D|E, "strict"},
{"unofficial", "allow unofficial extensions", 0, AV_OPT_TYPE_CONST, {.i64 = FF_COMPLIANCE_UNOFFICIAL }, INT_MIN, INT_MAX, D|E, "strict"},
{"experimental", "allow non-standardized experimental variants", 0, AV_OPT_TYPE_CONST, {.i64 = FF_COMPLIANCE_EXPERIMENTAL }, INT_MIN, INT_MAX, D|E, "strict"},
{"max_ts_probe", "maximum number of packets to read while waiting for the first timestamp", OFFSET(max_ts_probe), AV_OPT_TYPE_INT, { .i64 = 50 }, 0, INT_MAX, D },
{"avoid_negative_ts", "shift timestamps so they start at 0", OFFSET(avoid_negative_ts), AV_OPT_TYPE_INT, {.i64 = -1}, -1, 2, E, "avoid_negative_ts"},
{"auto", "enabled when required by target format", 0, AV_OPT_TYPE_CONST, {.i64 = AVFMT_AVOID_NEG_TS_AUTO }, INT_MIN, INT_MAX, E, "avoid_negative_ts"},
{"disabled", "do not change timestamps", 0, AV_OPT_TYPE_CONST, {.i64 = 0 }, INT_MIN, INT_MAX, E, "avoid_negative_ts"},
{"make_non_negative", "shift timestamps so they are non negative", 0, AV_OPT_TYPE_CONST, {.i64 = AVFMT_AVOID_NEG_TS_MAKE_NON_NEGATIVE }, INT_MIN, INT_MAX, E, "avoid_negative_ts"},
{"make_zero", "shift timestamps so they start at 0", 0, AV_OPT_TYPE_CONST, {.i64 = AVFMT_AVOID_NEG_TS_MAKE_ZERO }, INT_MIN, INT_MAX, E, "avoid_negative_ts"},
{"dump_separator", "set information dump field separator", OFFSET(dump_separator), AV_OPT_TYPE_STRING, {.str = ", "}, CHAR_MIN, CHAR_MAX, D|E},
{"codec_whitelist", "List of decoders that are allowed to be used", OFFSET(codec_whitelist), AV_OPT_TYPE_STRING, { .str = NULL }, CHAR_MIN, CHAR_MAX, D },
{"format_whitelist", "List of demuxers that are allowed to be used", OFFSET(format_whitelist), AV_OPT_TYPE_STRING, { .str = NULL }, CHAR_MIN, CHAR_MAX, D },
{"protocol_whitelist", "List of protocols that are allowed to be used", OFFSET(protocol_whitelist), AV_OPT_TYPE_STRING, { .str = NULL }, CHAR_MIN, CHAR_MAX, D },
{"protocol_blacklist", "List of protocols that are not allowed to be used", OFFSET(protocol_blacklist), AV_OPT_TYPE_STRING, { .str = NULL }, CHAR_MIN, CHAR_MAX, D },
{"max_streams", "maximum number of streams", OFFSET(max_streams), AV_OPT_TYPE_INT, { .i64 = 1000 }, 0, INT_MAX, D },
{"skip_estimate_duration_from_pts", "skip duration calculation in estimate_timings_from_pts", OFFSET(skip_estimate_duration_from_pts), AV_OPT_TYPE_BOOL, {.i64 = 0}, 0, 1, D},
{NULL},
};
里边的一堆参数，应该如何设置呢?
比如想用如下参数:
{"genpts", "generate pts", 0, AV_OPT_TYPE_CONST, {.i64 = AVFMT_FLAG_GENPTS }, INT_MIN, INT_MAX, D, "fflags"},
还有如下参数:
{"fastseek", "fast but inaccurate seeks", 0, AV_OPT_TYPE_CONST, {.i64 = AVFMT_FLAG_FAST_SEEK }, INT_MIN, INT_MAX, D, "fflags"},
应该怎么用呢?
可以用-fflags来实现。
fflags flags
Set format flags.
Some are implemented for a limited number of formats.Possible values for input files:
‘discardcorrupt’
Discard corrupted packets.‘fastseek’
Enable fast, but inaccurate seeks for some formats.‘genpts’
Generate missing PTS if DTS is present.‘igndts’
Ignore DTS if PTS is set. Inert when nofillin is set.‘ignidx’
Ignore index.‘keepside (deprecated,inert)’
‘nobuffer’
Reduce the latency introduced by buffering during initial input streams analysis.‘nofillin’
Do not fill in missing values in packet fields that can be exactly calculated.‘noparse’
Disable AVParsers, this needs +nofillin too.‘sortdts’
Try to interleave output packets by DTS. At present, available only for AVIs with an index.Possible values for output files:
‘autobsf’
Automatically apply bitstream filters as required by the output format. Enabled by default.‘bitexact’
Only write platform-, build- and time-independent data. This ensures that file and data checksums are reproducible and match between platforms. Its primary use is for regression testing.‘flush_packets’
Write out packets immediately.‘latm (deprecated,inert)’
‘shortest’
Stop muxing at the end of the shortest stream. It may be needed to increase max_interleave_delta to avoid flushing the longer streams before EOF.
使用举例:
ffmpeg -fflags +genpts -i input.ts -vcodec copy -an out.mkv
当遇到类似如下错误时:
[mp4 @ 0x7fe5ca01fa00] pts has no value
Last message repeated 1555 times
[mp4 @ 0x7fe5ca01fa00] pts has no value9kB time=00:01:17.70 bitrate=1458.0kbits/s
Last message repeated 1041 times
[mp4 @ 0x7fe5ca01fa00] pts has no value49kB time=00:02:08.42 bitrate=1661.6kbits/s
Last message repeated 1906 times
[mp4 @ 0x7fe5ca01fa00] pts has no value53kB time=00:03:40.39 bitrate=1537.1kbits/s
加上-fflags +genpts就可以解决这个问题。
References:
https://ffmpeg.org/ffmpeg-formats.html
https://trac.ffmpeg.org/ticket/1979
https://superuser.com/questions/710008/how-to-get-rid-of-ffmpeg-pts-has-no-value-error/710087