iOS动画篇_UIBezierPath(贝塞尔曲线)

很多人都说我动画做的贼6，但是不知道CALayer的原理，也不知道CALyer常用的几个子类，也并不知道贝塞尔曲线到底是怎么拐弯的，但是......我动画做的真的特别牛逼。

UIBezierPath

注：当贝塞尔曲线于CAShapeLayer混合使用时，共同作用的属性只遵循CAShapeLayer的设置！！！

有时候，看到一些陌生的东西会有莫名的抵触感，不知道怎么入手，其实最简单的，学习一个东西，我们就要先看系统提供的API，首先，创建贝塞尔曲线的几个方法和属性：

+ (instancetype)bezierPath;   //初始化贝塞尔曲线(无形状)
+ (instancetype)bezierPathWithRect:(CGRect)rect;  //绘制矩形贝塞尔曲线
+ (instancetype)bezierPathWithOvalInRect:(CGRect)rect;  //绘制椭圆（圆形）曲线
+ (instancetype)bezierPathWithRoundedRect:(CGRect)rect cornerRadius:(CGFloat)cornerRadius; // 绘制含有圆角的贝塞尔曲线
+ (instancetype)bezierPathWithRoundedRect:(CGRect)rect byRoundingCorners:(UIRectCorner)corners cornerRadii:(CGSize)cornerRadii;  //绘制可选择圆角方位的贝塞尔曲线
+ (instancetype)bezierPathWithArcCenter:(CGPoint)center radius:(CGFloat)radius startAngle:(CGFloat)startAngle endAngle:(CGFloat)endAngle clockwise:(BOOL)clockwise;   //绘制圆弧曲线
+ (instancetype)bezierPathWithCGPath:(CGPathRef)CGPath; //根据CGPathRef绘制贝塞尔曲线

- (void)moveToPoint:(CGPoint)point;  //贝塞尔曲线开始的点
- (void)addLineToPoint:(CGPoint)point;  //添加直线到该点
- (void)addCurveToPoint:(CGPoint)endPoint controlPoint1:(CGPoint)controlPoint1 controlPoint2:(CGPoint)controlPoint2;  //添加二次曲线到该点
- (void)addQuadCurveToPoint:(CGPoint)endPoint controlPoint:(CGPoint)controlPoint; //添加曲线到该点
- (void)addArcWithCenter:(CGPoint)center radius:(CGFloat)radius startAngle:(CGFloat)startAngle endAngle:(CGFloat)endAngle clockwise:(BOOL)clockwise NS_AVAILABLE_IOS(4_0);  //添加圆弧 注:上一个点会以直线的形式连接到圆弧的起点
- (void)closePath;  //闭合曲线

- (void)removeAllPoints; //去掉所有曲线点

@property(nonatomic) CGFloat lineWidth;  //边框宽度
@property(nonatomic) CGLineCap lineCapStyle;  //端点类型
@property(nonatomic) CGLineJoin lineJoinStyle;  //线条连接类型
@property(nonatomic) CGFloat miterLimit;  //线条最大宽度最大限制
- (void)setLineDash:(nullable const CGFloat *)pattern count:(NSInteger)count phase:(CGFloat)phase;  //虚线类型
- (void)fill;  //填充贝塞尔曲线内部
- (void)stroke; //绘制贝塞尔曲线边框

我们创建一个自定义的View，在drawRect:中进行各种贝塞尔曲线绘制：

- (void)drawRect:(CGRect)rect {
    //矩形贝塞尔曲线
    UIBezierPath* bezierPath_rect = [UIBezierPath bezierPathWithRect:CGRectMake(30, 50, 100, 100)];
    [bezierPath_rect moveToPoint:CGPointMake(60, 60)];
    [bezierPath_rect addLineToPoint:CGPointMake(80, 80)];
    [bezierPath_rect addLineToPoint:CGPointMake(60, 90)];
    //[bezierPath_rect closePath];
    //[bezierPath_rect removeAllPoints];
    bezierPath_rect.lineCapStyle = kCGLineCapButt;  //端点类型
    bezierPath_rect.lineJoinStyle = kCGLineJoinMiter;  //线条连接类型
    bezierPath_rect.miterLimit = 1;
    CGFloat dash[] = {20,1};
    [bezierPath_rect setLineDash:dash count:2 phase:0];
    bezierPath_rect.lineWidth = 10;
    //圆形 椭圆贝塞尔曲线
    UIBezierPath *bezierPath_oval = [UIBezierPath bezierPathWithOvalInRect:CGRectMake(200, 50, 150, 100)];
    bezierPath_oval.lineWidth = 10;
    //还有圆角的贝塞尔曲线
    UIBezierPath *bezierPath_RoundedRect = [UIBezierPath bezierPathWithRoundedRect:CGRectMake(30, 200, 100, 100) cornerRadius:20];
    bezierPath_RoundedRect.lineWidth = 10;
    //绘制可选择圆角方位的贝塞尔曲线
    UIBezierPath *bezierPath_RoundedCornerRect = [UIBezierPath bezierPathWithRoundedRect:CGRectMake(200, 200, 100, 100) byRoundingCorners:UIRectCornerTopLeft | UIRectCornerBottomRight cornerRadii:CGSizeMake(20, 20)];
    bezierPath_RoundedCornerRect.lineWidth = 10;
    //绘制圆弧曲线
    UIBezierPath *bezierPath_ArcCenter = [UIBezierPath bezierPathWithArcCenter:CGPointMake(0, 400) radius:50 startAngle:M_PI / 2 * 3 endAngle:M_PI / 3 clockwise:YES];
    bezierPath_ArcCenter.lineWidth = 10;
    //添加二次 三次贝塞尔曲线
    UIBezierPath *bezierPath = [UIBezierPath bezierPath];
    bezierPath.lineWidth = 2;
    [bezierPath moveToPoint:CGPointMake(10, 520)];
    [bezierPath addLineToPoint:CGPointMake(50, 530)];
    [bezierPath addQuadCurveToPoint:CGPointMake(100, 510) controlPoint:CGPointMake(80, 650)];
    [bezierPath addCurveToPoint:CGPointMake(200, 530) controlPoint1:CGPointMake(130, 600) controlPoint2:CGPointMake(170, 400)];
    [bezierPath addArcWithCenter:CGPointMake(300, 400) radius:50 startAngle:0 endAngle:M_PI * 2 clockwise:YES];
    
    [bezierPath moveToPoint:CGPointMake(20, 520)];
    [bezierPath addLineToPoint:CGPointMake(40, 520)];
    //根据CGPathRef绘制贝塞尔曲线
    CGMutablePathRef path = CGPathCreateMutable();
    CGPathMoveToPoint(path, NULL, 10, 640);
    CGPathAddCurveToPoint(path, NULL, 100, 700, 250, 550, 350, 650);
    UIBezierPath *bezierPath_CGPath = [UIBezierPath bezierPathWithCGPath:path];
    bezierPath_CGPath.lineWidth = 4;
    //选择填充颜色
    [[UIColor redColor] set];
    [bezierPath_rect fill];
    [bezierPath_oval fill];
    [bezierPath_RoundedRect fill];
    [bezierPath_RoundedCornerRect fill];
    //[bezierPath_ArcCenter fill];
    //[bezierPath_CGPath fill];

    //选择线条颜色
    [[UIColor blackColor] set];
    [bezierPath_rect stroke];
    [bezierPath_oval stroke];
    [bezierPath_RoundedRect stroke];
    [bezierPath_RoundedCornerRect stroke];
    [bezierPath_ArcCenter stroke];
    [bezierPath stroke];
    [bezierPath_CGPath stroke];
    //
    CALayer* aniLayer = [CALayer layer];
    aniLayer.backgroundColor = [UIColor redColor].CGColor;
    aniLayer.position = CGPointMake(10, 520);
    aniLayer.bounds = CGRectMake(0, 0, 8, 8);
    aniLayer.cornerRadius = 4;
    [self.layer addSublayer:aniLayer];
    //
    CAKeyframeAnimation* keyFrameAni = [CAKeyframeAnimation animationWithKeyPath:@"position"];
    keyFrameAni.repeatCount = NSIntegerMax;
    keyFrameAni.path = bezierPath.CGPath;
    keyFrameAni.duration = 15;
    keyFrameAni.beginTime = CACurrentMediaTime() + 1;
    [aniLayer addAnimation:keyFrameAni forKey:@"keyFrameAnimation"];
}

运行结果：

看完是不是记不住？记了半天是不是明天就忘了？哦吼吼！！！

这些基本包含了系统 UIBezierPath类所有可以创建的曲线类型，当然如果你通过 CGPathRef来创建曲线的话，就拥有了无限可能。看到这就完了，是不是觉得太少了，是不是没有你想要的东西，那就对了，欲知后事如何，且听下回分解！