如何在华为交换机上进行批量管理端口呢，例如同时将多个端口加入到一个vlan中

首先在S5700交换机上创建一个端口组（port-group 1），然后设置改组的成员是哪些端口

[A]port-group 1
[A-port-group-1]group-member GigabitEthernet 0/0/3 to GigabitEthernet 0/0/10
将该组的link-type设置成access
[A-port-group-1]port link-type access
[A-GigabitEthernet0/0/3]port link-type access
[A-GigabitEthernet0/0/4]port link-type access
[A-GigabitEthernet0/0/5]port link-type access
[A-GigabitEthernet0/0/6]port link-type access
[A-GigabitEthernet0/0/7]port link-type access
[A-GigabitEthernet0/0/8]port link-type access
[A-GigabitEthernet0/0/9]port link-type access
[A-GigabitEthernet0/0/10]port link-type access
将改组的所有成员加入到vlan2中
[A-port-group-1]port default vlan 2
[A-GigabitEthernet0/0/3]port default vlan 2
[A-GigabitEthernet0/0/4]port default vlan 2
[A-GigabitEthernet0/0/5]port default vlan 2
[A-GigabitEthernet0/0/6]port default vlan 2
[A-GigabitEthernet0/0/7]port default vlan 2
[A-GigabitEthernet0/0/8]port default vlan 2
[A-GigabitEthernet0/0/9]port default vlan 2
[A-GigabitEthernet0/0/10]port default vlan 2
[A-port-group-1]

验证是否成功

[A]display vlan 2
--------------------------------------------------------------------------------

U: Up;         D: Down;         TG: Tagged;         UT: Untagged;
MP: Vlan-mapping;               ST: Vlan-stacking;
#: ProtocolTransparent-vlan;    *: Management-vlan;
--------------------------------------------------------------------------------


VID  Type    Ports               
--------------------------------------------------------------------------------

2    common  UT:GE0/0/3(D)      GE0/0/4(D)      GE0/0/5(D)      GE0/0/6(D)     

                GE0/0/7(D)      GE0/0/8(D)      GE0/0/9(D)      GE0/0/10(D)    


VID  Status  Property      MAC-LRN Statistics Description     
--------------------------------------------------------------------------------

2    enable  default       enable  disable    VLAN 0002                        

[A]

可以看到vlan2中已经有3-10端口了，这样就可以轻松的将多个端口同时的加入到一个vlan中了，你学会了吗？？