一要求 ：给公司交换机升级版本，使其更能更强大
二 实施前准备
若用笔记本 需要usb 转9针串口 或者需要 一台有com口台式机
服务器（vm）一台 开通ftp
两、三根网线
Xp 装有crt 远程连接工具
三 实施
当前用的是笔记本一台（ip 22.72.42.155），装有虚拟机linux （22.72.42.154），开通ftp服务器；
台式机一台 带有9针串口，装有xp系统
笔记本 、台式机连接交换机，vm linux 桥接模式
1 crt 快速连接---- 协议 Serial；端口 com1；波特率 9600；数据流控制全部取消
连接后登录 h3c
Directory of flash:/
0 -rw- 10184320 Jun 29 2010 14:14:25 s5120si-cmw520-r1101p10.bin
1 drw- - Apr 26 2000 12:00:02 logfile
97920 KB total (86818 KB free)
^
% Unrecognized command found at '^' position.
H3C Comware Platform Software
Comware Software, Version 5.20, Release 1101P10
Copyright (c) 2004-2010 Hangzhou H3C Tech. Co., Ltd. All rights reserved.
H3C S5120-28P-SI uptime is 0 week, 0 day, 0 hour, 22 minutes
H3C S5120-28P-SI
128M
bytes DRAM
128M
bytes Nand Flash Memory
Config Register points to Nand Flash
Hardware Version is REV.B
CPLD Version is 002
Bootrom Version is 119
[SubSlot 0] 24GE+4SFP Hardware Version is REV.B
System View: return to User View with Ctrl+Z.
[H3C]int vlan 1
[H3C-Vlan-interface1]ip add 22.72.42.157 255.255.254.0
[H3C-Vlan-interface1]ping 22.72.42.154
PING 22.72.42.154: 56 data bytes, press CTRL_C to break
Reply from 22.72.42.154: bytes=56 Sequence=1 ttl=64 time=5 ms
Reply from 22.72.42.154: bytes=56 Sequence=2 ttl=64 time=1 ms
Reply from 22.72.42.154: bytes=56 Sequence=3 ttl=64 time=1 ms
Reply from 22.72.42.154: bytes=56 Sequence=4 ttl=64 time=1 ms
Reply from 22.72.42.154: bytes=56 Sequence=5 ttl=64 time=1 ms
--- 22.72.42.154 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 1/1/5 ms
需要推出 然后登录ftp
^
[H3C-Vlan-interface1]ftp 22.72.42.154
^
% Unrecognized command found at '^' position.
[H3C-Vlan-interface1]tftp 22.72.42.154
^
% Unrecognized command found at '^' position.
[H3C-Vlan-interface1]quit
[H3C]quit
Trying 22.72.42.154 ...
Press CTRL+K to abort
Connected to 22.72.42.154.
220 (vsFTPd 2.0.5)
User(22.72.42.154:(none)):root
331 Please specify the password.
Password:
230 Login successful.
[ftp]ls
227 Entering Passive Mode (22,72,42,154,149,40)
150 Here comes the directory listing.
Desktop
S5120SI_E-CMW520-R1505P05.bin
anaconda-ks.cfg
install.log
install.log.syslog
226 Directory send OK.
FTP: 90 byte(s) received in 0.140 second(s), 642.00 byte(s)/sec.
[ftp]get S5120SI_E-CMW520-R1505P05.bin
S5120SI_E-CMW520-R1505P05.bin
227 Entering Passive Mode (22,72,42,154,167,94)
150 Opening BINARY mode data connection for S5120SI_E-CMW520-R1505P05.bin (13488280 bytes).
226 File send OK.
FTP: 13488280 byte(s) received in 28.906 second(s), 466.00K byte(s)/sec.
[ftp]quit
221 Goodbye.
Directory of flash:/
0 -rw- 13488280 Apr 26 2000 16:57:01 s5120si_e-cmw520-r1505p05.bin
1 -rw- 10184320 Jun 29 2010 14:14:25 s5120si-cmw520-r1101p10.bin
2 drw- - Apr 26 2000 12:00:02 logfile
97920 KB total (73642 KB free)
This command will set the boot file. Continue? [Y/N]:y
The specified file will be used as the main boot file at the next reboot on slot 1!
Start to check configuration with next startup configuration file, please wait.........DONE!
This command will reboot the device. Current configuration may be lost in next startup if you continue. Continue? [Y/N]:y
#Apr 26 16:59:14:655 2000 H3C DEV/1/REBOOT:
Reboot device by command.
%Apr 26 16:59:14:740 2000 H3C DEV/4/SYSTEM REBOOT:
System is rebooting now.
Starting......
************************************************************************
* *
* H3C S5120-28P-SI BOOTROM, Version 119 *
* *
************************************************************************
Creation Date : Feb 3 2010
CPU L1 Cache : 32KB
CPU Clock Speed : 333MHz
Memory Size : 128MB
Flash Size : 128MB
CPLD Version : 002
PCB Version : Ver.B
Mac Address : C4CAD99F6E68
Press Ctrl-B to enter Extended Boot menu...0
Starting to get the main application
file--flash:/S5120SI_E-CMW520-R1505P05.bin!....................................
...................................................................
The main application file is self-decompressing................................
...............................................................................
.......................................................Done!
Extend BootWare Version is not equal,updating? (Y/N):Y
Updating extended BootRom...Done!
Basic BootWare Version is not equal,updating? (Y/N):
Updating Basic BootRom...Done!
BootWare updated,System is rebooting now.
Starting......
********************************************************************************
*
*
*
H3C S5120-28P-SI BOOTROM, Version 139 *
*
*
********************************************************************************
Copyright (c) 2004-2011 Hangzhou H3C Technologies Co., Ltd.
Creation Date
: May 5 2011
CPU L1 Cache
: 32KB
CPU Clock Speed
: 333MHz
Memory Size
: 128MB
Flash Size
: 128MB
CPLD Version
: 002
PCB Version
: Ver.B
Mac Address
: C4CAD99F6E68
the normal and back basic is not equal, update back basic....
the normal and back extend is not equal, update back extend....
Press Ctrl-B to enter Extended Boot menu...0
Starting to get the main application file--flash:/S5120SI_E-CMW520-R1505P05.
bin!............................................................................
...........................
The main application file is self-decompressing.................................
................................................................................
.....................................................Done!
System is starting...
Startup configuration file does not exist.
User interface aux0 is available.
Press ENTER to get started.
#Apr 26 12:01:36:389 2000 H3C SHELL/4/LOGIN:
Trap 1.3.6.1.4.1.25506.2.2.1.1.3.0.1: login from Console
%Apr 26 12:01:36:528 2000 H3C SHELL/5/SHELL_LOGIN: Console logged in from aux0.
% Unrecognized command found at '^' position.
H3C Comware Platform Software
Comware Software,
Version 5.20, Release 1505P05
Copyright (c) 2004-2011 Hangzhou H3C Tech. Co., Ltd. All rights reserved.
H3C S5120-28P-SI uptime is 0 week, 0 day, 0 hour, 2 minutes
H3C S5120-28P-SI
128M
bytes DRAM
128M
bytes Nand Flash Memory
Config Register points to Nand Flash
Hardware Version is REV.B
CPLD Version is 002
Bootrom Version is 139
[SubSlot 0] 24GE+4SFP Hardware Version is REV.B
******************************************************************************
* Copyright (c) 2004-2011 Hangzhou H3C Tech. Co., Ltd. All rights reserved. *
* Without the owner's prior written consent,
*
* no decompiling or reverse-engineering shall be allowed.
*
******************************************************************************
User interface aux0 is available.
Please press ENTER.
一要求 ：给公司交换机升级版本，使其更能更强大
二 实施前准备
若用笔记本 需要usb 转9针串口 或者需要 一台有com口台式机
服务器（vm）一台 开通ftp
两、三根网线
Xp 装有crt 远程连接工具
三 实施
当前用的是笔记本一台（ip 22.72.42.155），装有虚拟机linux （22.72.42.154），开通ftp服务器；
台式机一台 带有9针串口，装有xp系统
笔记本 、台式机连接交换机，vm linux 桥接模式
1 crt 快速连接---- 协议 Serial；端口 com1；波特率 9600；数据流控制全部取消
连接后登录 h3c
Directory of flash:/
0 -rw- 10184320 Jun 29 2010 14:14:25 s5120si-cmw520-r1101p10.bin
1 drw- - Apr 26 2000 12:00:02 logfile
97920 KB total (86818 KB free)
^
% Unrecognized command found at '^' position.
H3C Comware Platform Software
Comware Software, Version 5.20, Release 1101P10
Copyright (c) 2004-2010 Hangzhou H3C Tech. Co., Ltd. All rights reserved.
H3C S5120-28P-SI uptime is 0 week, 0 day, 0 hour, 22 minutes
H3C S5120-28P-SI
128M
bytes DRAM
128M
bytes Nand Flash Memory
Config Register points to Nand Flash
Hardware Version is REV.B
CPLD Version is 002
Bootrom Version is 119
[SubSlot 0] 24GE+4SFP Hardware Version is REV.B
System View: return to User View with Ctrl+Z.
[H3C]int vlan 1
[H3C-Vlan-interface1]ip add 22.72.42.157 255.255.254.0
[H3C-Vlan-interface1]ping 22.72.42.154
PING 22.72.42.154: 56 data bytes, press CTRL_C to break
Reply from 22.72.42.154: bytes=56 Sequence=1 ttl=64 time=5 ms
Reply from 22.72.42.154: bytes=56 Sequence=2 ttl=64 time=1 ms
Reply from 22.72.42.154: bytes=56 Sequence=3 ttl=64 time=1 ms
Reply from 22.72.42.154: bytes=56 Sequence=4 ttl=64 time=1 ms
Reply from 22.72.42.154: bytes=56 Sequence=5 ttl=64 time=1 ms
--- 22.72.42.154 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 1/1/5 ms
需要推出 然后登录ftp
^
[H3C-Vlan-interface1]ftp 22.72.42.154
^
% Unrecognized command found at '^' position.
[H3C-Vlan-interface1]tftp 22.72.42.154
^
% Unrecognized command found at '^' position.
[H3C-Vlan-interface1]quit
[H3C]quit
Trying 22.72.42.154 ...
Press CTRL+K to abort
Connected to 22.72.42.154.
220 (vsFTPd 2.0.5)
User(22.72.42.154:(none)):root
331 Please specify the password.
Password:
230 Login successful.
[ftp]ls
227 Entering Passive Mode (22,72,42,154,149,40)
150 Here comes the directory listing.
Desktop
S5120SI_E-CMW520-R1505P05.bin
anaconda-ks.cfg
install.log
install.log.syslog
226 Directory send OK.
FTP: 90 byte(s) received in 0.140 second(s), 642.00 byte(s)/sec.
[ftp]get S5120SI_E-CMW520-R1505P05.bin
S5120SI_E-CMW520-R1505P05.bin
227 Entering Passive Mode (22,72,42,154,167,94)
150 Opening BINARY mode data connection for S5120SI_E-CMW520-R1505P05.bin (13488280 bytes).
226 File send OK.
FTP: 13488280 byte(s) received in 28.906 second(s), 466.00K byte(s)/sec.
[ftp]quit
221 Goodbye.
Directory of flash:/
0 -rw- 13488280 Apr 26 2000 16:57:01 s5120si_e-cmw520-r1505p05.bin
1 -rw- 10184320 Jun 29 2010 14:14:25 s5120si-cmw520-r1101p10.bin
2 drw- - Apr 26 2000 12:00:02 logfile
97920 KB total (73642 KB free)
This command will set the boot file. Continue? [Y/N]:y
The specified file will be used as the main boot file at the next reboot on slot 1!
Start to check configuration with next startup configuration file, please wait.........DONE!
This command will reboot the device. Current configuration may be lost in next startup if you continue. Continue? [Y/N]:y
#Apr 26 16:59:14:655 2000 H3C DEV/1/REBOOT:
Reboot device by command.
%Apr 26 16:59:14:740 2000 H3C DEV/4/SYSTEM REBOOT:
System is rebooting now.
Starting......
************************************************************************
* *
* H3C S5120-28P-SI BOOTROM, Version 119 *
* *
************************************************************************
Creation Date : Feb 3 2010
CPU L1 Cache : 32KB
CPU Clock Speed : 333MHz
Memory Size : 128MB
Flash Size : 128MB
CPLD Version : 002
PCB Version : Ver.B
Mac Address : C4CAD99F6E68
Press Ctrl-B to enter Extended Boot menu...0
Starting to get the main application
file--flash:/S5120SI_E-CMW520-R1505P05.bin!....................................
...................................................................
The main application file is self-decompressing................................
...............................................................................
.......................................................Done!
Extend BootWare Version is not equal,updating? (Y/N):Y
Updating extended BootRom...Done!
Basic BootWare Version is not equal,updating? (Y/N):
Updating Basic BootRom...Done!
BootWare updated,System is rebooting now.
Starting......
********************************************************************************
*
*
*
H3C S5120-28P-SI BOOTROM, Version 139 *
*
*
********************************************************************************
Copyright (c) 2004-2011 Hangzhou H3C Technologies Co., Ltd.
Creation Date
: May 5 2011
CPU L1 Cache
: 32KB
CPU Clock Speed
: 333MHz
Memory Size
: 128MB
Flash Size
: 128MB
CPLD Version
: 002
PCB Version
: Ver.B
Mac Address
: C4CAD99F6E68
the normal and back basic is not equal, update back basic....
the normal and back extend is not equal, update back extend....
Press Ctrl-B to enter Extended Boot menu...0
Starting to get the main application file--flash:/S5120SI_E-CMW520-R1505P05.
bin!............................................................................
...........................
The main application file is self-decompressing.................................
................................................................................
.....................................................Done!
System is starting...
Startup configuration file does not exist.
User interface aux0 is available.
Press ENTER to get started.
#Apr 26 12:01:36:389 2000 H3C SHELL/4/LOGIN:
Trap 1.3.6.1.4.1.25506.2.2.1.1.3.0.1: login from Console
%Apr 26 12:01:36:528 2000 H3C SHELL/5/SHELL_LOGIN: Console logged in from aux0.
% Unrecognized command found at '^' position.
H3C Comware Platform Software
Comware Software,
Version 5.20, Release 1505P05
Copyright (c) 2004-2011 Hangzhou H3C Tech. Co., Ltd. All rights reserved.
H3C S5120-28P-SI uptime is 0 week, 0 day, 0 hour, 2 minutes
H3C S5120-28P-SI
128M
bytes DRAM
128M
bytes Nand Flash Memory
Config Register points to Nand Flash
Hardware Version is REV.B
CPLD Version is 002
Bootrom Version is 139
[SubSlot 0] 24GE+4SFP Hardware Version is REV.B
******************************************************************************
* Copyright (c) 2004-2011 Hangzhou H3C Tech. Co., Ltd. All rights reserved. *
* Without the owner's prior written consent,
*
* no decompiling or reverse-engineering shall be allowed.
*
******************************************************************************
User interface aux0 is available.
Please press ENTER.