Today, my colleague explain to us about RxSwift. So I want to know that I should learning RxSwift or ReactiveCocoa. I found a good article on Stack Overflow. Now, I share with you.
Question
So now with swift, the ReactiveCocoa people have rewritten it in version 3.0 for swift
Also, there's been another project spun up called RxSwift.
I wonder if people could add information about what the differences in design/api/philosophy of the two frameworks are (please, in the spirit of SO, stick to things which are true, rather than opinions about which is "best")
[Note for StackOverflow mods: This question DOES have definitive answers, the answer is the differences between the two frameworks. I think it is also highly on topic for SO]
To get started, my initial impression from reading their ReadMe's is:
- As someone who is familiar with the "real" C# Rx from microsoft, RxSwift looks a lot more recognisable.
- ReactiveCococa seems to have gone off into it's own space now, introducing new abstractions such as Signals vs SignalProducers and Lifting. On the one hand this seems to clarify some situations (what's a Hot vs Cold signal) but on the other hand this seems to increase the complexity of the framework a LOT
Answer
This is a very good question. Comparing the two worlds is very hard. Rx is a port of what Reactive Extensions are in other languages like C#, Java or JS.
Reactive Cocoa was inspired by Functional Reactive Programming, but in the last months, has been also pointed as inspired by Reactive Extensions as well. The outcome is a framework that shares some things with Rx, but has names with origins in FRP.
The first thing to say is that neither RAC nor RxSwift are Functional Reactive Programming implementations, according to Conal's definition of the concept. From this point everything can be reduced to how each framework handles side effects and a few other components.
Let's talk about the community and meta-tech stuff:
- RAC is a 3 years old project, born in Objective-C later ported to Swift (with bridges) for the 3.0 release, after completely dropping the ongoing work on Objective-C.
- RxSwift is a few months old project and seems to have a momentum in the community right now. One thing that is important for RxSwift is that is under the ReactiveX organization and that all other implementations are working in the same way, learning how to deal with RxSwift will make working with Rx.Net, RxJava or RxJS a simple task and just a matter of language syntax. I could say that is based on the philosophy learn once, apply everywhere.
Now it's time for the tech stuff.
Producing/Observing Entities
RAC 3.0 has 2 main entities, Signal and SignalProducer, the first one publishes events regardless a subscriber is attached or not, the second one requires a start to actually having signals/events produced. This design has been created to separate the tedious concept of hot and cold observables, that has been source of confusion for a lot of developers. This is why the differences can be reduced to how they manage side effects.
In RxSwift, Signal and SignalProducer translates to Observable, it could sound confusing, but these 2 entities are actually the same thing in the Rx world. A design with Observables in RxSwift has to be created considering if they are hot or cold, it could sound as unnecessary complexity, but once you understood how they work (and again hot/cold/warm is just about the side effects while subscribing/observing) they can be tamed.
In both worlds, the concept of subscription is basically the same, there's one little difference that RAC introduced and is the interruption event when a Signal is disposed before the completion event has been sent. To recap both have the following kind of events:
-
Next, to compute the new received value -
Error, to compute an error and complete the stream, unsubscribing all the observers -
Complete, to mark the stream as completed unsubscribing all observers
RAC in addition has interrupted that is sent when a Signal is disposed before completing either correctly or with an error.
Manually Writing
In RAC, Signal/SignalProducer are read-only entities, they can't be managed from outside, same thing is for Observable in RxSwift. To turn a Signal/SignalProducer into a write-able entity, you have to use the pipe() function to return a manually controlled item. On the Rx space, this is a different type called Subject.
If the read/write concept sounds unfamiliar, a nice analogy with Future/Promise can be made. A Future is a read-only placeholder, like Signal/SignalProducer and Observable, on the other hand, a Promise can be fulfilled manually, like for pipe() and Subject.
Schedulers
This entity is pretty much similar in both worlds, same concepts, but RAC is serial-only, instead RxSwift features also concurrent schedulers.
Composition
Composition is the key feature of Reactive Programming. Composing streams is the essence of both frameworks, in RxSwift they are also called sequences.
All the observable entities in RxSwift are of type ObservableType, so we compose instances of Subject and Observable with the same operators, without any extra concern.
On RAC space, Signal and SignalProducer are 2 different entities and we have to lift on SignalProducer to be able to compose what is produced with instances of Signal. The two entities have their own operators, so when you need to mix things, you have to make sure a certain operator is available, on the other side you forget about the hot/cold observables.
About this part, Colin Eberhardt summed it nicely:
Looking at the current API the signal operations are mainly focussed on the ‘next’ event, allowing you to transform values, skip, delay, combine and observe on different threads. Whereas the signal producer API is mostly concerned with the signal lifecycle events (completed, error), with operations including then, flatMap, takeUntil and catch.
Extra
RAC has also the concept of Action and Property, the former is a type to compute side effects, mainly relating to user interaction, the latter is interesting when observing a value to perform a task when the value has changed. In RxSwift the Action translates again into an Observable, this is nicely shown in RxCocoa, an integration of Rx primitives for both iOS and Mac. The RAC's Property can be translated into Variable (or BehaviourSubject) in RxSwift.
It's important to understand that Property/Variable is the way we have to bridge the imperative world to the declarative nature of Reactive Programming, so sometimes is a fundamental component when dealing with third party libraries or core functionalities of the iOS/Mac space.
Conclusion
RAC and RxSwift are 2 complete different beasts, the former has a long history in the Cocoa space and a lot of contributors, the latter is fairly young, but relies on concepts that have been proven to be effective in other languages like Java, JS or .NET. The decision on which is better is on preference. RAC states that the separation of hot/cold observable was necessary and that is the core feature of the framework, RxSwift says that the unification of them is better than the separation, again it's just about how side effects are managed/performed.
RAC 3.0 seems to have introduced some unexpected complexity on top of the major goal of separating hot/cold observables, like the concept of interruption, splitting operators between 2 entities and introducing some imperative behaviour like start to begin producing signals. For some people these things can be a nice thing to have or even a killer feature, for some others they can be just unnecessary or even dangerous. Another thing to remember is that RAC is trying to keep up with Cocoa conventions as much as possible, so if you are an experienced Cocoa Dev, you should feel more comfortable to work with it rather than RxSwift.
RxSwift on the other hand lives with all the downsides like hot/cold observables, but also the good things, of Reactive Extensions. Moving from RxJS, RxJava or Rx.Net to RxSwift is a simple thing, all the concepts are the same, so this makes finding material pretty interesting, maybe the same problem you are facing now, has been solved by someone in RxJava and the solution can be reapplied taking in consideration the platform.
Which one has to be picked is definitely a matter of preference, from an objective perspective is impossible to tell which one is better. The only way is to fire Xcode and try both of them and pick the one that feels more comfortable to work with. They are 2 implementations of similar concepts, trying to achieve the same goal: simplifying software development.
From:
- ReactiveCocoa vs RxSwift - pros and cons?