iOS 逆向-macho文件和LLDB

一 利用class-dump导出所有头文件

1. 安装class-dunmp

可以直接安装class-dump 或者安装MonkeyDev
安装MonkeyDev过后设置环境变量：因为本人用的zsh，所以vim ~/.zshrc加上export PATH=/opt/MonkeyDev/bin:$PATH

2. 导出头文件

把ipa用归档实用工具打开，显示包内容，找到同名macho文件，进入文件目录，然后class-dump -H QQMusic -o new(新的目录文件中)

二 拆分和合并macho二进制文件

1. 拆分

当用多个架构打包后，会生成一个fat macho文件，用以下命令拆分：

lipo QQMusic -thin arm64 -output macho_arm64
lipo QQMusic -thin armv7 -output macho_armv7

把QQMusic二进制的arm64架构拆分并输出为新的名字为macho_arm64的文件

2. 查看二进制文件信息

file QQMusic

3. 合并

lipo -create macho_armv7 macho_arm64 -output newQQMUSIC

三 xcode选择编译架构

1.png

build active architecture only设置debug和release版本编译是，是否编译多个架构；Architecture和valid Architecctures的交集，决定编译时编译哪些架构

四 LLDB

1. 代码断点

• 设置断点
  
  

  2.png
  
  设置多个oc方法的断点：breakpoint set -n "-[ViewController save:]" -n "-[ViewController pauseGame:]"
• 查看断点 breakpoint list
• 继续程序 c
• 禁用断点 breakpoint disable 2.1禁用第二组的第一个断点
• 启用断点 breakpoint enable 2.1
• 删除断点：只能删除某组断点breakpoint delete 3，如果breakpoint delete 3.1起到的是禁用3.1的作用
• 查看lldb指令：help

help breakpoint
     Commands for operating on breakpoints (see 'help b' for shorthand.)

Syntax: breakpoint

The following subcommands are supported:

      clear   -- Delete or disable breakpoints matching the specified source
                 file and line.
      command -- Commands for adding, removing and listing LLDB commands
                 executed when a breakpoint is hit.
      delete  -- Delete the specified breakpoint(s).  If no breakpoints are
                 specified, delete them all.
      disable -- Disable the specified breakpoint(s) without deleting them.  If
                 none are specified, disable all breakpoints.
      enable  -- Enable the specified disabled breakpoint(s). If no breakpoints
                 are specified, enable all of them.
      list    -- List some or all breakpoints at configurable levels of detail.
      modify  -- Modify the options on a breakpoint or set of breakpoints in
                 the executable.  If no breakpoint is specified, acts on the
                 last created breakpoint.  With the exception of -e, -d and -i,
                 passing an empty argument clears the modification.
      name    -- Commands to manage name tags for breakpoints
      read    -- Read and set the breakpoints previously saved to a file with
                 "breakpoint write".  
      set     -- Sets a breakpoint or set of breakpoints in the executable.
      write   -- Write the breakpoints listed to a file that can be read in
                 with "breakpoint read".  If given no arguments, writes all
                 breakpoints.

For more help on any particular subcommand, type 'help  '.

• 设置所有的save:方法的断点 breakpoint set --selector save:

• 设置某个文件中的save:方法的断点：breakpoint set --file ViewController.m --selector save:

• 全局遍历项目中所有方法名中包含某字段的断点：breakpoint set -r Game:

• 根据内存地址给方法-[ViewController eatWithObjc:] 下断点：
  image list得到:

[  0] 9DC999FC-3D7D-37A2-A57D-F33622E4FB43 0x0000000101378000 /Users/mac/Library/Developer/Xcode/DerivedData/003--Demo1-euekigzuynuvedgnvqwopomnhaam/Build/Products/Debug-iphoneos/003--Demo1.app/003--Demo1

那么ALSR偏移量为：0x1378000,在ida中得到-[ViewController eatWithObjc:]的地址为：

_text:0000000100006688 ; void __cdecl -[ViewController eatWithObjc:](ViewController *self, SEL, id)
__text:0000000100006688 __ViewController_eatWithObjc__          ; DATA XREF: __objc_const:0000000100008170↓o

最终得到方法在内存中的真实地址为：0x100006688+0x1378000
下断点：b -a 0x100006688+0x1378000

2. 执行代码进行调试

• expression 简写p

(lldb) expression self.view.subviews
(NSArray *) $0 = 0x0000000159e38920
(lldb) p self.view.backgroundColor = [UIColor yellowColor]
(UIColor *) $1 = 0x0000000159e837f0
(lldb) c
Process 80637 resuming
2018-05-07 16:20:42.198488+0800 001--LLDB[80637:7308534] XPC connection interrupted
2018-05-07 16:21:00.038626+0800 001--LLDB[80637:7308097] Status bar could not find cached time string image. Rendering in-process.

打印对象:po self.view.subviews

• 举个例子：

在数组中加入新的Person对象

(lldb) p [self.models addObject:[Person new]];
(lldb) p (Person *)self.models.lastObject
(Person *) $3 = 0x0000000101508080
(lldb) p $3.name = @"meryin"
(NSString *) $4 = 0xa006e697972656d6
(lldb) p $3.age = 20
(int) $5 = 20
(lldb) po $3.name
meryin

设置变量然后再添加：

(lldb) p Person *p4 = [Person new]; //按住control和回车键，继续代码
p4.name = @"tom";p4.age = 25;
[self.models addObject:p4];//最后回车

3. 内存断点

• 给某对象的某属性下断点：
  (lldb) watchpoint set variable p1->_name
  或者利用内存地址下断点：

(lldb) frame variable
(ViewController *) self = 0x0000000105ec23b0
(SEL) _cmd = "viewDidLoad"
(Person *) p1 = 0x0000000105ea8190
(Person *) p2 = 0x0000000000000010
(Person *) p3 = 0x000000016f3e5528
(lldb) p &p1->_name
(NSString **) $2 = 0x0000000105ea81a0
(lldb) watchpoint set expression 0x0000000105ea81a0
Watchpoint created: Watchpoint 2: addr = 0x105ea81a0 size = 8 state = enabled type = w
    new value: 4305584416
(lldb) watchpoint list
Number of supported hardware watchpoints: 4
Current watchpoints:
Watchpoint 2: addr = 0x105ea81a0 size = 8 state = enabled type = w
    new value: 4305584416
(lldb) 

4. 断点后执行指令

(lldb) break command add 1
Enter your debugger command(s).  Type 'DONE' to end.
> p self //回车
> p self.models //回车
> DONE //回车

在1组处打了断点，断点执行到1后会执行p self等指令
用breakpoint command list查看断点 用法和breakpoint一样

5. 查看堆栈信息

• 函数调用栈：bt

(lldb) bt
* thread #1, queue = 'com.apple.main-thread', stop reason = breakpoint 1.1
  * frame #0: 0x000000010092e388 001--LLDB`-[ViewController touchesBegan:withEvent:](self=0x0000000100e69740, _cmd="touchesBegan:withEvent:", touches=0x0000000100fa54d0, event=0x0000000100f644d0) at ViewController.m:85
    frame #1: 0x000000018ea61870 UIKit`forwardTouchMethod + 340
    frame #2: 0x000000018e9077c8 UIKit`-[UIResponder touchesBegan:withEvent:] + 60
    frame #3: 0x000000018e901830 UIKit`-[UIWindow _sendTouchesForEvent:] + 1892
    frame #4: 0x000000018e8f68f8 UIKit`-[UIWindow sendEvent:] + 3160
    frame #5: 0x000000018e8f5238 UIKit`-[UIApplication sendEvent:] + 340
    frame #6: 0x000000018f0d6c0c UIKit`__dispatchPreprocessedEventFromEventQueue + 2340
    frame #7: 0x000000018f0d91b8 UIKit`__handleEventQueueInternal + 4744
    frame #8: 0x000000018f0d2258 UIKit`__handleHIDEventFetcherDrain + 152
    frame #9: 0x0000000184af7404 CoreFoundation`__CFRUNLOOP_IS_CALLING_OUT_TO_A_SOURCE0_PERFORM_FUNCTION__ + 24
    frame #10: 0x0000000184af6c2c CoreFoundation`__CFRunLoopDoSources0 + 276
    frame #11: 0x0000000184af479c CoreFoundation`__CFRunLoopRun + 1204
    frame #12: 0x0000000184a14da8 CoreFoundation`CFRunLoopRunSpecific + 552
    frame #13: 0x00000001869f7020 GraphicsServices`GSEventRunModal + 100
    frame #14: 0x000000018e9f578c UIKit`UIApplicationMain + 236
    frame #15: 0x000000010092e54c 001--LLDB`main(argc=1, argv=0x000000016f4d79d8) at main.m:14
    frame #16: 0x00000001844a5fc0 libdyld.dylib`start + 4

• 查看某一个函数: frame select 1
• 查看上一个函数：(lldb) up
• 查看下一个函数:(lldb) down
• 查看参数:

(lldb) frame variable
(ViewController *) self = 0x0000000100e69740
(SEL) _cmd = "touchesBegan:withEvent:"
(NSSet *) touches = 0x0000000100fa54d0
(UIEvent *) event = 0x0000000100f644d0
(NSString *) str = 0x0000000100e96820
(Person *) p1 = 0x0000000100faa7b0
(lldb) p str = @"xxx";
(lldb) po str
xxx

• 回滚上一个函数并不再执行：thread return

6. stop-hook

在每次断住程序的时候去执行一些命令,只对breadpoint,watchpoint生效

(lldb) target stop-hook add -o "frame variable"
Stop hook #1 added.
(lldb) target stop-hook list
Hook: 1
  State: enabled
  Commands: 
    frame variable

当某个断点触发后，会执行"frame variable"指令
target stop-hook用法和breakpoint 一样，list查看，delete删除 删除某组还可以用(lldb) undisplay 1
还可以用配置文件，不用每次运行Xcode都要写指令：
找到.lldbinit或者touch .lldbinit在此文件中配置自己的指令。

4.png

vim .lldbinit然后 target stop-hook add -o "frame variable"保存退出，用 cat .lldbinit可以看到 target stop-hook add -o "frame variable"

7. image lookup查看库，类和崩溃等信息

(lldb) help image lookup
     Look up information within executable and dependent shared library images.

Syntax: 

Command Options Usage:
  target modules lookup [-Av] -a  [-o ] [ [ [...]]]
  target modules lookup [-Arv] -s  [ [ [...]]]
  target modules lookup [-Aiv] -f  [-l ] [ [ [...]]]
  target modules lookup [-Airv] -F  [ [ [...]]]
  target modules lookup [-Airv] -n  [ [ [...]]]
  target modules lookup [-Av] -t  [ [ [...]]]

       -A ( --all )
            Print all matches, not just the best match, if a best match is
            available.

       -F  ( --function  )
            Lookup a function by name in the debug symbols in one or more
            target modules.

       -a  ( --address  )
            Lookup an address in one or more target modules.

       -f  ( --file  )
            Lookup a file by fullpath or basename in one or more target
            modules.

       -i ( --no-inlines )
            Ignore inline entries (must be used in conjunction with --file or
            --function).

       -l  ( --line  )
            Lookup a line number in a file (must be used in conjunction with
            --file).

       -n  ( --name  )
            Lookup a function or symbol by name in one or more target modules.

       -o  ( --offset  )
            When looking up an address subtract  from any addresses
            before doing the lookup.

       -r ( --regex )
            The  argument for name lookups are regular expressions.

       -s  ( --symbol  )
            Lookup a symbol by name in the symbol tables in one or more target
            modules.

       -t  ( --type  )
            Lookup a type by name in the debug symbols in one or more target
            modules.

       -v ( --verbose )
            Enable verbose lookup information.
     
     This command takes options and free-form arguments.  If your arguments
     resemble option specifiers (i.e., they start with a - or --), you must use
     ' -- ' between the end of the command options and the beginning of the
     arguments.

'image' is an abbreviation for 'target modules'

• 查看崩溃信息
  比如数组越界的崩溃信息：

*** Terminating app due to uncaught exception 'NSRangeException', reason: '*** -[__NSArrayM objectAtIndexedSubscript:]: index 4 beyond bounds [0 .. 2]'
*** First throw call stack:
(0x184b4ed8c 0x183d085ec 0x184ae7750 0x184ad48cc 0x1007ae328 0x18ea61870 0x18e9077c8 0x18e901830 0x18e8f68f8 0x18e8f5238 0x18f0d6c0c 0x18f0d91b8 0x18f0d2258 0x184af7404 0x184af6c2c 0x184af479c 0x184a14da8 0x1869f7020 0x18e9f578c 0x1007ae52c 0x1844a5fc0)
libc++abi.dylib: terminating with uncaught exception of type NSException

用image lookup -a查看信息,找到崩溃的方法-[ViewController touchesBegan:withEvent:]

(lldb) image lookup -a 0x184b4ed8c
      Address: CoreFoundation[0x0000000180ef6d8c] (CoreFoundation.__TEXT.__text + 1313804)
      Summary: CoreFoundation`__exceptionPreprocess + 228
(lldb) image lookup -a 0x1007ae328 
      Address: 001--LLDB[0x0000000100006328] (001--LLDB.__TEXT.__text + 1796)
      Summary: 001--LLDB`-[ViewController touchesBegan:withEvent:] + 160 at ViewController.m:86
(lldb) image lookup -a 0x18ea61870
      Address: UIKit[0x000000018ae09870] (UIKit.__TEXT.__text + 3699592)
      Summary: UIKit`forwardTouchMethod + 340

• 查看类信息
  image lookup -t Person
• image list查看当前用到的库

8. 其他指令

• 单步运行（子函数当成整体）：n
• 单步运行（进入子函数）：s
• 汇编的单步（子函数当成整体）：ni

• 汇编的单步（进入子函数）：si

  
  
  

  3.png